src/mess/drivers/kaypro.c
| r6854 | r6855 | |
| 20 | 20 | |
| 21 | 21 | Things that need doing: |
| 22 | 22 | |
| 23 | | - Need schematics of 2x and kaypro10 (used 2-84 which doesn't seem to be the same). |
| 24 | | They currently are not reading any data from disk. |
| 23 | - Kaypro2x and kaypro10 are not reading any data from disk, because it depends |
| 24 | on the index hole indication, which is not fully implemented in wd177x. |
| 25 | 25 | |
| 26 | | - omni2 and kaypro4 would (I believe) boot up if we had a proper boot disk. The IMD |
| 27 | | conversions seem to have the tracks scrambled (e.g reading side 0 track 1 gives us |
| 28 | | side 1 track 0). |
| 29 | | |
| 30 | 26 | - Kaypro2x and Kaypro10 don't centre the display at boot, but a soft reset fixes it. |
| 31 | 27 | Perhaps the guesswork emulation of the video ULA is incomplete. |
| 32 | 28 | |
| 29 | - Kaypro 4 plus 88 does work as a normal Kaypro, but the extra processor needs |
| 30 | to be worked out. |
| 33 | 31 | |
| 32 | |
| 34 | 33 | **************************************************************************************************/ |
| 35 | 34 | |
| 36 | 35 | |
| r6854 | r6855 | |
| 46 | 45 | #include "includes/kaypro.h" |
| 47 | 46 | |
| 48 | 47 | |
| 48 | static READ8_HANDLER( kaypro2x_87) { return 0x7f; } /* to bypass unemulated HD controller */ |
| 49 | 49 | |
| 50 | 50 | /*********************************************************** |
| 51 | 51 | |
| r6854 | r6855 | |
| 95 | 95 | AM_RANGE(0x85, 0x85) Hard Drive Cylinder high register I/O |
| 96 | 96 | AM_RANGE(0x86, 0x86) Hard Drive Size / Drive / Head register I/O |
| 97 | 97 | AM_RANGE(0x87, 0x87) Hard Drive READ status register, WRITE command register */ |
| 98 | | AM_RANGE(0x20, 0x87) AM_NOP |
| 98 | AM_RANGE(0x20, 0x86) AM_NOP |
| 99 | AM_RANGE(0x87, 0x87) AM_READ(kaypro2x_87) |
| 99 | 100 | ADDRESS_MAP_END |
| 100 | 101 | |
| 101 | 102 | |
| r6854 | r6855 | |
| 292 | 293 | |
| 293 | 294 | /* devices */ |
| 294 | 295 | MDRV_QUICKLOAD_ADD("quickload", kaypro2x, "com,cpm", 3) |
| 295 | | MDRV_WD179X_ADD("wd1793", kaypro_wd1793_interface ) |
| 296 | MDRV_WD1793_ADD("wd1793", kaypro_wd1793_interface ) |
| 296 | 297 | MDRV_CENTRONICS_ADD("centronics", standard_centronics) |
| 297 | 298 | MDRV_Z80SIO_ADD( "z80sio", 4800, kaypro_sio_intf ) |
| 298 | 299 | MDRV_Z80SIO_ADD( "z80sio_2x", 4800, kaypro_sio_intf ) /* extra sio for modem and printer */ |