src/mess/machine/rmnimbus.c
| r6831 | r6832 | |
| 1 | | /* |
| 2 | | machine/rmnimbus.c |
| 3 | | |
| 4 | | Machine driver for the Research Machines Nimbus. |
| 5 | | |
| 6 | | Phill Harvey-Smith |
| 7 | | 2009-11-29. |
| 8 | | |
| 9 | | 80186 internal DMA/Timer/PIC code borrowed from Compis driver. |
| 10 | | Perhaps this needs merging into the 80186 core..... |
| 11 | | */ |
| 12 | | |
| 13 | | |
| 14 | | #include "driver.h" |
| 15 | | #include "memory.h" |
| 16 | | #include "cpu/i86/i86.h" |
| 17 | | #include "debug/debugcpu.h" |
| 18 | | #include "debug/debugcon.h" |
| 19 | | #include "devices/flopdrv.h" |
| 20 | | #include "machine/pic8259.h" |
| 21 | | #include "machine/pit8253.h" |
| 22 | | #include "machine/msm8251.h" |
| 23 | | #include "machine/z80sio.h" |
| 24 | | |
| 25 | | #include "includes/rmnimbus.h" |
| 26 | | |
| 27 | | /*-------------------------------------------------------------------------*/ |
| 28 | | /* Defines, constants, and global variables */ |
| 29 | | /*-------------------------------------------------------------------------*/ |
| 30 | | |
| 31 | | /* CPU 80186 */ |
| 32 | | #define LATCH_INTS 1 |
| 33 | | #define LOG_PORTS 0 |
| 34 | | #define LOG_INTERRUPTS 0 |
| 35 | | #define LOG_INTERRUPTS_EXT 0 |
| 36 | | #define LOG_TIMER 0 |
| 37 | | #define LOG_OPTIMIZATION 0 |
| 38 | | #define LOG_DMA 0 |
| 39 | | #define CPU_RESUME_TRIGGER 7123 |
| 40 | | #define LOG_KEYBOARD 1 |
| 41 | | |
| 42 | | /* 80186 internal stuff */ |
| 43 | | struct mem_state |
| 44 | | { |
| 45 | | UINT16 lower; |
| 46 | | UINT16 upper; |
| 47 | | UINT16 middle; |
| 48 | | UINT16 middle_size; |
| 49 | | UINT16 peripheral; |
| 50 | | }; |
| 51 | | |
| 52 | | struct timer_state |
| 53 | | { |
| 54 | | UINT16 control; |
| 55 | | UINT16 maxA; |
| 56 | | UINT16 maxB; |
| 57 | | UINT16 count; |
| 58 | | emu_timer *int_timer; |
| 59 | | emu_timer *time_timer; |
| 60 | | UINT8 time_timer_active; |
| 61 | | attotime last_time; |
| 62 | | }; |
| 63 | | |
| 64 | | struct dma_state |
| 65 | | { |
| 66 | | UINT32 source; |
| 67 | | UINT32 dest; |
| 68 | | UINT16 count; |
| 69 | | UINT16 control; |
| 70 | | UINT8 finished; |
| 71 | | emu_timer *finish_timer; |
| 72 | | }; |
| 73 | | |
| 74 | | struct intr_state |
| 75 | | { |
| 76 | | UINT8 pending; |
| 77 | | UINT16 ack_mask; |
| 78 | | UINT16 priority_mask; |
| 79 | | UINT16 in_service; |
| 80 | | UINT16 request; |
| 81 | | UINT16 status; |
| 82 | | UINT16 poll_status; |
| 83 | | UINT16 timer; |
| 84 | | UINT16 dma[2]; |
| 85 | | UINT16 ext[4]; |
| 86 | | UINT16 ext_vector[2]; // external vectors, when in cascade mode |
| 87 | | }; |
| 88 | | |
| 89 | | static struct i186_state |
| 90 | | { |
| 91 | | struct timer_state timer[3]; |
| 92 | | struct dma_state dma[2]; |
| 93 | | struct intr_state intr; |
| 94 | | struct mem_state mem; |
| 95 | | } i186; |
| 96 | | |
| 97 | | |
| 98 | | /* Z80 SIO */ |
| 99 | | |
| 100 | | const z80sio_interface sio_intf = |
| 101 | | { |
| 102 | | sio_interrupt, /* interrupt handler */ |
| 103 | | 0, //sio_dtr_w, /* DTR changed handler */ |
| 104 | | 0, /* RTS changed handler */ |
| 105 | | 0, /* BREAK changed handler */ |
| 106 | | sio_serial_transmit, /* transmit handler */ |
| 107 | | sio_serial_receive /* receive handler */ |
| 108 | | }; |
| 109 | | |
| 110 | | struct keybord_state |
| 111 | | { |
| 112 | | UINT8 keyrows[NIMBUS_KEYROWS]; |
| 113 | | emu_timer *keyscan_timer; |
| 114 | | UINT8 queue[KEYBOARD_QUEUE_SIZE]; |
| 115 | | UINT8 head; |
| 116 | | UINT8 tail; |
| 117 | | } keyboard; |
| 118 | | |
| 119 | | |
| 120 | | |
| 121 | | /* Floppy drives WD2793 */ |
| 122 | | |
| 123 | | static WRITE_LINE_DEVICE_HANDLER( nimbus_fdc_intrq_w ); |
| 124 | | static WRITE_LINE_DEVICE_HANDLER( nimbus_fdc_drq_w ); |
| 125 | | |
| 126 | | const wd17xx_interface nimbus_wd17xx_interface = |
| 127 | | { |
| 128 | | DEVCB_LINE(nimbus_fdc_intrq_w), |
| 129 | | DEVCB_LINE(nimbus_fdc_drq_w), |
| 130 | | {FLOPPY_0, FLOPPY_1, FLOPPY_2, FLOPPY_3} |
| 131 | | }; |
| 132 | | |
| 133 | | static struct _nimbus_fdc |
| 134 | | { |
| 135 | | UINT8 drq_enabled; |
| 136 | | UINT8 irq_enabled; |
| 137 | | UINT8 diskno; |
| 138 | | UINT8 motor_on; |
| 139 | | } nimbus_fdc; |
| 140 | | |
| 141 | | |
| 142 | | static void drq_callback(running_machine *machine, int which); |
| 143 | | |
| 144 | | static void execute_debug_irq(running_machine *machine, int ref, int params, const char *param[]); |
| 145 | | static void execute_debug_intmasks(running_machine *machine, int ref, int params, const char *param[]); |
| 146 | | |
| 147 | | static int instruction_hook(const device_config *device, offs_t curpc); |
| 148 | | static void decode_subbios(const device_config *device,offs_t pc); |
| 149 | | static void decode_dssi_f_fill_area(const device_config *device,UINT16 ds, UINT16 si); |
| 150 | | static void decode_dssi_f_plot_character_string(const device_config *device,UINT16 ds, UINT16 si); |
| 151 | | static void decode_dssi_f_set_new_clt(const device_config *device,UINT16 ds, UINT16 si); |
| 152 | | static void fdc_reset(void); |
| 153 | | |
| 154 | | static void keyboard_reset(void); |
| 155 | | static TIMER_CALLBACK(keyscan_callback); |
| 156 | | |
| 157 | | #define num_ioports 0x80 |
| 158 | | static UINT16 IOPorts[num_ioports]; |
| 159 | | |
| 160 | | UINT8 nextkey; |
| 161 | | UINT8 sio_int_state; |
| 162 | | |
| 163 | | /************************************* |
| 164 | | * |
| 165 | | * 80186 interrupt controller |
| 166 | | * |
| 167 | | *************************************/ |
| 168 | | static IRQ_CALLBACK(int_callback) |
| 169 | | { |
| 170 | | UINT8 vector; |
| 171 | | UINT16 old; |
| 172 | | UINT16 oldreq; |
| 173 | | |
| 174 | | if (LOG_INTERRUPTS) |
| 175 | | logerror("(%f) **** Acknowledged interrupt vector %02X\n", attotime_to_double(timer_get_time(device->machine)), i186.intr.poll_status & 0x1f); |
| 176 | | |
| 177 | | /* clear the interrupt */ |
| 178 | | cpu_set_input_line(device, 0, CLEAR_LINE); |
| 179 | | i186.intr.pending = 0; |
| 180 | | |
| 181 | | oldreq=i186.intr.request; |
| 182 | | |
| 183 | | /* clear the request and set the in-service bit */ |
| 184 | | #if LATCH_INTS |
| 185 | | i186.intr.request &= ~i186.intr.ack_mask; |
| 186 | | #else |
| 187 | | i186.intr.request &= ~(i186.intr.ack_mask & 0x0f); |
| 188 | | #endif |
| 189 | | |
| 190 | | if(i186.intr.request!=oldreq) |
| 191 | | logerror("i186.intr.request changed from %02X to %02X\n",oldreq,i186.intr.request); |
| 192 | | |
| 193 | | old=i186.intr.in_service; |
| 194 | | |
| 195 | | i186.intr.in_service |= i186.intr.ack_mask; |
| 196 | | |
| 197 | | if (LOG_INTERRUPTS) |
| 198 | | if(i186.intr.in_service!=old) |
| 199 | | logerror("i186.intr.in_service changed from %02X to %02X\n",old,i186.intr.in_service); |
| 200 | | |
| 201 | | if (i186.intr.ack_mask == 0x0001) |
| 202 | | { |
| 203 | | switch (i186.intr.poll_status & 0x1f) |
| 204 | | { |
| 205 | | case 0x08: i186.intr.status &= ~0x01; break; |
| 206 | | case 0x12: i186.intr.status &= ~0x02; break; |
| 207 | | case 0x13: i186.intr.status &= ~0x04; break; |
| 208 | | } |
| 209 | | } |
| 210 | | i186.intr.ack_mask = 0; |
| 211 | | |
| 212 | | /* a request no longer pending */ |
| 213 | | i186.intr.poll_status &= ~0x8000; |
| 214 | | |
| 215 | | /* return the vector */ |
| 216 | | switch(i186.intr.poll_status & 0x1F) |
| 217 | | { |
| 218 | | case 0x0C : vector=(i186.intr.ext[0] & EXTINT_CTRL_CASCADE) ? i186.intr.ext_vector[0] : (i186.intr.poll_status & 0x1f); logerror("int 0x0c vector=%02X\n",vector); break; |
| 219 | | case 0x0D : vector=(i186.intr.ext[1] & EXTINT_CTRL_CASCADE) ? i186.intr.ext_vector[1] : (i186.intr.poll_status & 0x1f); logerror("int 0x0D vector=%02X\n",vector); break; |
| 220 | | default : |
| 221 | | vector=i186.intr.poll_status & 0x1f; break; |
| 222 | | } |
| 223 | | |
| 224 | | if (LOG_INTERRUPTS_EXT) |
| 225 | | { |
| 226 | | logerror("i186.intr.ext[0]=%04X i186.intr.ext[1]=%04X\n",i186.intr.ext[0],i186.intr.ext[1]); |
| 227 | | logerror("Ext vectors : %02X %02X\n",i186.intr.ext_vector[0],i186.intr.ext_vector[1]); |
| 228 | | logerror("Calling vector %02X\n",vector); |
| 229 | | } |
| 230 | | |
| 231 | | return vector; |
| 232 | | } |
| 233 | | |
| 234 | | |
| 235 | | static void update_interrupt_state(running_machine *machine) |
| 236 | | { |
| 237 | | int new_vector = 0; |
| 238 | | int Priority; |
| 239 | | int IntNo; |
| 240 | | |
| 241 | | if (LOG_INTERRUPTS) |
| 242 | | logerror("update_interrupt_status: req=%04X stat=%04X serv=%04X priority_mask=%4X\n", i186.intr.request, i186.intr.status, i186.intr.in_service, i186.intr.priority_mask); |
| 243 | | |
| 244 | | /* loop over priorities */ |
| 245 | | for (Priority = 0; Priority <= i186.intr.priority_mask; Priority++) |
| 246 | | { |
| 247 | | /* note: by checking 4 bits, we also verify that the mask is off */ |
| 248 | | if ((i186.intr.timer & 15) == Priority) |
| 249 | | { |
| 250 | | /* if we're already servicing something at this level, don't generate anything new */ |
| 251 | | if (i186.intr.in_service & 0x01) |
| 252 | | return; |
| 253 | | |
| 254 | | /* if there's something pending, generate an interrupt */ |
| 255 | | if (i186.intr.status & 0x07) |
| 256 | | { |
| 257 | | if (i186.intr.status & 1) |
| 258 | | new_vector = 0x08; |
| 259 | | else if (i186.intr.status & 2) |
| 260 | | new_vector = 0x12; |
| 261 | | else if (i186.intr.status & 4) |
| 262 | | new_vector = 0x13; |
| 263 | | else |
| 264 | | popmessage("Invalid timer interrupt!"); |
| 265 | | |
| 266 | | /* set the clear mask and generate the int */ |
| 267 | | i186.intr.ack_mask = 0x0001; |
| 268 | | goto generate_int; |
| 269 | | } |
| 270 | | } |
| 271 | | |
| 272 | | /* check DMA interrupts */ |
| 273 | | for (IntNo = 0; IntNo < 2; IntNo++) |
| 274 | | if ((i186.intr.dma[IntNo] & 0x0F) == Priority) |
| 275 | | { |
| 276 | | /* if we're already servicing something at this level, don't generate anything new */ |
| 277 | | if (i186.intr.in_service & (0x04 << IntNo)) |
| 278 | | return; |
| 279 | | |
| 280 | | /* if there's something pending, generate an interrupt */ |
| 281 | | if (i186.intr.request & (0x04 << IntNo)) |
| 282 | | { |
| 283 | | new_vector = 0x0a + IntNo; |
| 284 | | |
| 285 | | /* set the clear mask and generate the int */ |
| 286 | | i186.intr.ack_mask = 0x0004 << IntNo; |
| 287 | | goto generate_int; |
| 288 | | } |
| 289 | | } |
| 290 | | |
| 291 | | //logerror("Checking external ints\n"); |
| 292 | | /* check external interrupts */ |
| 293 | | for (IntNo = 0; IntNo < 4; IntNo++) |
| 294 | | if ((i186.intr.ext[IntNo] & 0x0F) == Priority) |
| 295 | | { |
| 296 | | if (LOG_INTERRUPTS) |
| 297 | | logerror("Int%d priority=%d\n",IntNo,Priority); |
| 298 | | |
| 299 | | /* if we're already servicing something at this level, don't generate anything new */ |
| 300 | | if (i186.intr.in_service & (0x10 << IntNo)) |
| 301 | | return; |
| 302 | | |
| 303 | | /* if there's something pending, generate an interrupt */ |
| 304 | | if (i186.intr.request & (0x10 << IntNo)) |
| 305 | | { |
| 306 | | /* otherwise, generate an interrupt for this request */ |
| 307 | | new_vector = 0x0c + IntNo; |
| 308 | | |
| 309 | | /* set the clear mask and generate the int */ |
| 310 | | i186.intr.ack_mask = 0x0010 << IntNo; |
| 311 | | logerror("External int !\n"); |
| 312 | | goto generate_int; |
| 313 | | } |
| 314 | | } |
| 315 | | } |
| 316 | | return; |
| 317 | | |
| 318 | | generate_int: |
| 319 | | /* generate the appropriate interrupt */ |
| 320 | | i186.intr.poll_status = 0x8000 | new_vector; |
| 321 | | if (!i186.intr.pending) |
| 322 | | cputag_set_input_line(machine, MAINCPU_TAG, 0, ASSERT_LINE); |
| 323 | | i186.intr.pending = 1; |
| 324 | | cpuexec_trigger(machine, CPU_RESUME_TRIGGER); |
| 325 | | if (LOG_OPTIMIZATION) logerror(" - trigger due to interrupt pending\n"); |
| 326 | | if (LOG_INTERRUPTS) logerror("(%f) **** Requesting interrupt vector %02X\n", attotime_to_double(timer_get_time(machine)), new_vector); |
| 327 | | } |
| 328 | | |
| 329 | | |
| 330 | | static void handle_eoi(running_machine *machine,int data) |
| 331 | | { |
| 332 | | int Priority; |
| 333 | | int IntNo; |
| 334 | | |
| 335 | | /* specific case */ |
| 336 | | if (!(data & 0x8000)) |
| 337 | | { |
| 338 | | /* turn off the appropriate in-service bit */ |
| 339 | | switch (data & 0x1f) |
| 340 | | { |
| 341 | | case 0x08: i186.intr.in_service &= ~0x01; break; |
| 342 | | case 0x12: i186.intr.in_service &= ~0x01; break; |
| 343 | | case 0x13: i186.intr.in_service &= ~0x01; break; |
| 344 | | case 0x0a: i186.intr.in_service &= ~0x04; break; |
| 345 | | case 0x0b: i186.intr.in_service &= ~0x08; break; |
| 346 | | case 0x0c: i186.intr.in_service &= ~0x10; break; |
| 347 | | case 0x0d: i186.intr.in_service &= ~0x20; break; |
| 348 | | case 0x0e: i186.intr.in_service &= ~0x40; break; |
| 349 | | case 0x0f: i186.intr.in_service &= ~0x80; break; |
| 350 | | default: logerror("%05X:ERROR - 80186 EOI with unknown vector %02X\n", cpu_get_pc(cputag_get_cpu(machine, MAINCPU_TAG)), data & 0x1f); |
| 351 | | } |
| 352 | | if (LOG_INTERRUPTS) logerror("(%f) **** Got EOI for vector %02X\n", attotime_to_double(timer_get_time(machine)), data & 0x1f); |
| 353 | | } |
| 354 | | |
| 355 | | /* non-specific case */ |
| 356 | | else |
| 357 | | { |
| 358 | | /* loop over priorities */ |
| 359 | | for (Priority = 0; Priority <= 7; Priority++) |
| 360 | | { |
| 361 | | /* check for in-service timers */ |
| 362 | | if ((i186.intr.timer & 0x07) == Priority && (i186.intr.in_service & 0x01)) |
| 363 | | { |
| 364 | | i186.intr.in_service &= ~0x01; |
| 365 | | if (LOG_INTERRUPTS) logerror("(%f) **** Got EOI for timer\n", attotime_to_double(timer_get_time(machine))); |
| 366 | | return; |
| 367 | | } |
| 368 | | |
| 369 | | /* check for in-service DMA interrupts */ |
| 370 | | for (IntNo = 0; IntNo < 2; IntNo++) |
| 371 | | if ((i186.intr.dma[IntNo] & 0x07) == Priority && (i186.intr.in_service & (0x04 << IntNo))) |
| 372 | | { |
| 373 | | i186.intr.in_service &= ~(0x04 << IntNo); |
| 374 | | if (LOG_INTERRUPTS) logerror("(%f) **** Got EOI for DMA%d\n", attotime_to_double(timer_get_time(machine)), IntNo); |
| 375 | | return; |
| 376 | | } |
| 377 | | |
| 378 | | /* check external interrupts */ |
| 379 | | for (IntNo = 0; IntNo < 4; IntNo++) |
| 380 | | if ((i186.intr.ext[IntNo] & 0x07) == Priority && (i186.intr.in_service & (0x10 << IntNo))) |
| 381 | | { |
| 382 | | i186.intr.in_service &= ~(0x10 << IntNo); |
| 383 | | if (LOG_INTERRUPTS) logerror("(%f) **** Got EOI for INT%d\n", attotime_to_double(timer_get_time(machine)), IntNo); |
| 384 | | return; |
| 385 | | } |
| 386 | | } |
| 387 | | } |
| 388 | | } |
| 389 | | |
| 390 | | /* Trigger an external interupt, optionally supplying the vector to take */ |
| 391 | | static void external_int(running_machine *machine, UINT16 intno, UINT8 vector) |
| 392 | | { |
| 393 | | if (LOG_INTERRUPTS_EXT) logerror("generating external int %02X, vector %02X\n",intno,vector); |
| 394 | | |
| 395 | | // Only 4 external ints |
| 396 | | if(intno>3) |
| 397 | | { |
| 398 | | logerror("external_int() invalid external interupt no : 0x%02X (can only be 0..3)\n",intno); |
| 399 | | return; |
| 400 | | } |
| 401 | | |
| 402 | | // Only set external vector if cascade mode enabled, only valid for |
| 403 | | // int 0 & int 1 |
| 404 | | if (intno<2) |
| 405 | | { |
| 406 | | if(i186.intr.ext[intno] & EXTINT_CTRL_CASCADE) |
| 407 | | i186.intr.ext_vector[intno]=vector; |
| 408 | | } |
| 409 | | |
| 410 | | // Turn on the requested request bit and handle interrupt |
| 411 | | i186.intr.request |= (0x010 << intno); |
| 412 | | update_interrupt_state(machine); |
| 413 | | } |
| 414 | | |
| 415 | | |
| 416 | | /************************************* |
| 417 | | * |
| 418 | | * 80186 internal timers |
| 419 | | * |
| 420 | | *************************************/ |
| 421 | | |
| 422 | | static TIMER_CALLBACK(internal_timer_int) |
| 423 | | { |
| 424 | | int which = param; |
| 425 | | struct timer_state *t = &i186.timer[which]; |
| 426 | | |
| 427 | | if (LOG_TIMER) logerror("Hit interrupt callback for timer %d\n", which); |
| 428 | | |
| 429 | | /* set the max count bit */ |
| 430 | | t->control |= 0x0020; |
| 431 | | |
| 432 | | /* request an interrupt */ |
| 433 | | if (t->control & 0x2000) |
| 434 | | { |
| 435 | | i186.intr.status |= 0x01 << which; |
| 436 | | update_interrupt_state(machine); |
| 437 | | if (LOG_TIMER) logerror(" Generating timer interrupt\n"); |
| 438 | | } |
| 439 | | |
| 440 | | /* if we're continuous, reset */ |
| 441 | | if (t->control & 0x0001) |
| 442 | | { |
| 443 | | int count = t->maxA ? t->maxA : 0x10000; |
| 444 | | timer_adjust_oneshot(t->int_timer, attotime_mul(ATTOTIME_IN_HZ(2000000), count), which); |
| 445 | | if (LOG_TIMER) logerror(" Repriming interrupt\n"); |
| 446 | | } |
| 447 | | else |
| 448 | | timer_adjust_oneshot(t->int_timer, attotime_never, which); |
| 449 | | } |
| 450 | | |
| 451 | | |
| 452 | | static void internal_timer_sync(int which) |
| 453 | | { |
| 454 | | struct timer_state *t = &i186.timer[which]; |
| 455 | | |
| 456 | | /* if we have a timing timer running, adjust the count */ |
| 457 | | if (t->time_timer_active) |
| 458 | | { |
| 459 | | attotime current_time = timer_timeelapsed(t->time_timer); |
| 460 | | int net_clocks = attotime_mul(attotime_sub(current_time, t->last_time), 2000000).seconds; |
| 461 | | t->last_time = current_time; |
| 462 | | |
| 463 | | /* set the max count bit if we passed the max */ |
| 464 | | if ((int)t->count + net_clocks >= t->maxA) |
| 465 | | t->control |= 0x0020; |
| 466 | | |
| 467 | | /* set the new count */ |
| 468 | | if (t->maxA != 0) |
| 469 | | t->count = (t->count + net_clocks) % t->maxA; |
| 470 | | else |
| 471 | | t->count = t->count + net_clocks; |
| 472 | | } |
| 473 | | } |
| 474 | | |
| 475 | | |
| 476 | | static void internal_timer_update(running_machine *machine, |
| 477 | | int which, |
| 478 | | int new_count, |
| 479 | | int new_maxA, |
| 480 | | int new_maxB, |
| 481 | | int new_control) |
| 482 | | { |
| 483 | | struct timer_state *t = &i186.timer[which]; |
| 484 | | int update_int_timer = 0; |
| 485 | | |
| 486 | | logerror("internal_timer_update: %d, new_count=%d, new_maxA=%d, new_maxB=%d,new_control=%d",which,new_count,new_maxA,new_maxB,new_control); |
| 487 | | |
| 488 | | /* if we have a new count and we're on, update things */ |
| 489 | | if (new_count != -1) |
| 490 | | { |
| 491 | | if (t->control & 0x8000) |
| 492 | | { |
| 493 | | internal_timer_sync(which); |
| 494 | | update_int_timer = 1; |
| 495 | | } |
| 496 | | t->count = new_count; |
| 497 | | } |
| 498 | | |
| 499 | | /* if we have a new max and we're on, update things */ |
| 500 | | if (new_maxA != -1 && new_maxA != t->maxA) |
| 501 | | { |
| 502 | | if (t->control & 0x8000) |
| 503 | | { |
| 504 | | internal_timer_sync(which); |
| 505 | | update_int_timer = 1; |
| 506 | | } |
| 507 | | t->maxA = new_maxA; |
| 508 | | if (new_maxA == 0) |
| 509 | | { |
| 510 | | new_maxA = 0x10000; |
| 511 | | } |
| 512 | | } |
| 513 | | |
| 514 | | /* if we have a new max and we're on, update things */ |
| 515 | | if (new_maxB != -1 && new_maxB != t->maxB) |
| 516 | | { |
| 517 | | if (t->control & 0x8000) |
| 518 | | { |
| 519 | | internal_timer_sync(which); |
| 520 | | update_int_timer = 1; |
| 521 | | } |
| 522 | | |
| 523 | | t->maxB = new_maxB; |
| 524 | | |
| 525 | | if (new_maxB == 0) |
| 526 | | { |
| 527 | | new_maxB = 0x10000; |
| 528 | | } |
| 529 | | } |
| 530 | | |
| 531 | | |
| 532 | | /* handle control changes */ |
| 533 | | if (new_control != -1) |
| 534 | | { |
| 535 | | int diff; |
| 536 | | |
| 537 | | /* merge back in the bits we don't modify */ |
| 538 | | new_control = (new_control & ~0x1fc0) | (t->control & 0x1fc0); |
| 539 | | |
| 540 | | /* handle the /INH bit */ |
| 541 | | if (!(new_control & 0x4000)) |
| 542 | | new_control = (new_control & ~0x8000) | (t->control & 0x8000); |
| 543 | | new_control &= ~0x4000; |
| 544 | | |
| 545 | | /* check for control bits we don't handle */ |
| 546 | | diff = new_control ^ t->control; |
| 547 | | if (diff & 0x001c) |
| 548 | | logerror("%05X:ERROR! -unsupported timer mode %04X\n", |
| 549 | | cpu_get_pc(cputag_get_cpu(machine, MAINCPU_TAG)), new_control); |
| 550 | | |
| 551 | | /* if we have real changes, update things */ |
| 552 | | if (diff != 0) |
| 553 | | { |
| 554 | | |
| 555 | | /* if we're going off, make sure our timers are gone */ |
| 556 | | if ((diff & 0x8000) && !(new_control & 0x8000)) |
| 557 | | { |
| 558 | | /* compute the final count */ |
| 559 | | internal_timer_sync(which); |
| 560 | | |
| 561 | | /* nuke the timer and force the interrupt timer to be recomputed */ |
| 562 | | timer_adjust_oneshot(t->time_timer, attotime_never, which); |
| 563 | | t->time_timer_active = 0; |
| 564 | | update_int_timer = 1; |
| 565 | | } |
| 566 | | |
| 567 | | /* if we're going on, start the timers running */ |
| 568 | | else if ((diff & 0x8000) && (new_control & 0x8000)) |
| 569 | | { |
| 570 | | /* start the timing */ |
| 571 | | timer_adjust_oneshot(t->time_timer, attotime_never, which); |
| 572 | | t->time_timer_active = 1; |
| 573 | | update_int_timer = 1; |
| 574 | | } |
| 575 | | |
| 576 | | /* if something about the interrupt timer changed, force an update */ |
| 577 | | if (!(diff & 0x8000) && (diff & 0x2000)) |
| 578 | | { |
| 579 | | internal_timer_sync(which); |
| 580 | | update_int_timer = 1; |
| 581 | | } |
| 582 | | } |
| 583 | | |
| 584 | | /* set the new control register */ |
| 585 | | t->control = new_control; |
| 586 | | } |
| 587 | | |
| 588 | | /* update the interrupt timer */ |
| 589 | | if (update_int_timer) |
| 590 | | { |
| 591 | | if ((t->control & 0x8000) && (t->control & 0x2000)) |
| 592 | | { |
| 593 | | int diff = t->maxA - t->count; |
| 594 | | if (diff <= 0) |
| 595 | | diff += 0x10000; |
| 596 | | timer_adjust_oneshot(t->int_timer, attotime_mul(ATTOTIME_IN_HZ(2000000), diff), which); |
| 597 | | if (LOG_TIMER) logerror("Set interrupt timer for %d\n", which); |
| 598 | | } |
| 599 | | else |
| 600 | | { |
| 601 | | timer_adjust_oneshot(t->int_timer, attotime_never, which); |
| 602 | | } |
| 603 | | } |
| 604 | | } |
| 605 | | |
| 606 | | |
| 607 | | |
| 608 | | /************************************* |
| 609 | | * |
| 610 | | * 80186 internal DMA |
| 611 | | * |
| 612 | | *************************************/ |
| 613 | | |
| 614 | | static TIMER_CALLBACK(dma_timer_callback) |
| 615 | | { |
| 616 | | int which = param; |
| 617 | | struct dma_state *d = &i186.dma[which]; |
| 618 | | |
| 619 | | /* force an update and see if we're really done */ |
| 620 | | //stream_update(dma_stream, 0); |
| 621 | | |
| 622 | | /* complete the status update */ |
| 623 | | d->control &= ~0x0002; |
| 624 | | d->source += d->count; |
| 625 | | d->count = 0; |
| 626 | | |
| 627 | | /* check for interrupt generation */ |
| 628 | | if (d->control & 0x0100) |
| 629 | | { |
| 630 | | if (LOG_DMA) logerror("DMA%d timer callback - requesting interrupt: count = %04X, source = %04X\n", which, d->count, d->source); |
| 631 | | i186.intr.request |= 0x04 << which; |
| 632 | | update_interrupt_state(machine); |
| 633 | | } |
| 634 | | } |
| 635 | | |
| 636 | | |
| 637 | | static void update_dma_control(running_machine *machine, int which, int new_control) |
| 638 | | { |
| 639 | | struct dma_state *d = &i186.dma[which]; |
| 640 | | int diff; |
| 641 | | |
| 642 | | /* handle the CHG bit */ |
| 643 | | if (!(new_control & CHG_NOCHG)) |
| 644 | | new_control = (new_control & ~ST_STOP) | (d->control & ST_STOP); |
| 645 | | new_control &= ~CHG_NOCHG; |
| 646 | | |
| 647 | | /* check for control bits we don't handle */ |
| 648 | | diff = new_control ^ d->control; |
| 649 | | if (diff & 0x6811) |
| 650 | | logerror("%05X:ERROR! - unsupported DMA mode %04X\n", |
| 651 | | cpu_get_pc(cputag_get_cpu(machine, MAINCPU_TAG)), new_control); |
| 652 | | |
| 653 | | /* if we're going live, set a timer */ |
| 654 | | if ((diff & 0x0002) && (new_control & 0x0002)) |
| 655 | | { |
| 656 | | /* make sure the parameters meet our expectations */ |
| 657 | | if ((new_control & 0xfe00) != 0x1600) |
| 658 | | { |
| 659 | | logerror("Unexpected DMA control %02X\n", new_control); |
| 660 | | } |
| 661 | | else if (/*!is_redline &&*/ ((d->dest & 1) || (d->dest & 0x3f) > 0x0b)) |
| 662 | | { |
| 663 | | logerror("Unexpected DMA destination %02X\n", d->dest); |
| 664 | | } |
| 665 | | else if (/*is_redline && */ (d->dest & 0xf000) != 0x4000 && (d->dest & 0xf000) != 0x5000) |
| 666 | | { |
| 667 | | logerror("Unexpected DMA destination %02X\n", d->dest); |
| 668 | | } |
| 669 | | |
| 670 | | /* otherwise, set a timer */ |
| 671 | | else |
| 672 | | { |
| 673 | | // int count = d->count; |
| 674 | | |
| 675 | | /* adjust for redline racer */ |
| 676 | | // int dacnum = (d->dest & 0x3f) / 2; |
| 677 | | |
| 678 | | if (LOG_DMA) logerror("Initiated DMA %d - count = %04X, source = %04X, dest = %04X\n", which, d->count, d->source, d->dest); |
| 679 | | |
| 680 | | d->finished = 0; |
| 681 | | /* timer_adjust_oneshot(d->finish_timer, |
| 682 | | ATTOTIME_IN_HZ(dac[dacnum].frequency) * (double)count, which);*/ |
| 683 | | } |
| 684 | | } |
| 685 | | |
| 686 | | /* set the new control register */ |
| 687 | | d->control = new_control; |
| 688 | | } |
| 689 | | |
| 690 | | static void drq_callback(running_machine *machine, int which) |
| 691 | | { |
| 692 | | struct dma_state *dma = &i186.dma[which]; |
| 693 | | const address_space *memory_space = cpu_get_address_space(cputag_get_cpu(machine, MAINCPU_TAG), ADDRESS_SPACE_PROGRAM); |
| 694 | | const address_space *io_space = cpu_get_address_space(cputag_get_cpu(machine, MAINCPU_TAG), ADDRESS_SPACE_IO); |
| 695 | | |
| 696 | | const address_space *src_space; |
| 697 | | const address_space *dest_space; |
| 698 | | |
| 699 | | UINT16 dma_word; |
| 700 | | UINT8 dma_byte; |
| 701 | | UINT8 incdec_size; |
| 702 | | |
| 703 | | if (LOG_DMA) |
| 704 | | logerror("Control=%04X, src=%05X, dest=%05X, count=%04X\n",dma->control,dma->source,dma->dest,dma->count); |
| 705 | | |
| 706 | | if(!(dma->control & ST_STOP)) |
| 707 | | { |
| 708 | | logerror("%05X:ERROR! - drq%d with dma channel stopped\n", |
| 709 | | cpu_get_pc(cputag_get_cpu(machine, MAINCPU_TAG)), which); |
| 710 | | |
| 711 | | return; |
| 712 | | } |
| 713 | | |
| 714 | | if(dma->control & DEST_MIO) |
| 715 | | { |
| 716 | | dest_space=memory_space; |
| 717 | | //logerror("dest=memory\n"); |
| 718 | | } |
| 719 | | else |
| 720 | | { |
| 721 | | dest_space=io_space; |
| 722 | | //logerror("dest=I/O\n"); |
| 723 | | } |
| 724 | | |
| 725 | | if(dma->control & SRC_MIO) |
| 726 | | { |
| 727 | | src_space=memory_space; |
| 728 | | //logerror("src=memory\n"); |
| 729 | | } |
| 730 | | else |
| 731 | | { |
| 732 | | src_space=io_space; |
| 733 | | //logerror("src=I/O\n"); |
| 734 | | } |
| 735 | | |
| 736 | | // Do the transfer |
| 737 | | if(dma->control & BYTE_WORD) |
| 738 | | { |
| 739 | | //logerror("moving word\n"); |
| 740 | | dma_word=memory_read_word(src_space,dma->source); |
| 741 | | memory_write_word(dest_space,dma->dest,dma_word); |
| 742 | | incdec_size=2; |
| 743 | | } |
| 744 | | else |
| 745 | | { |
| 746 | | //logerror("moving byte\n"); |
| 747 | | dma_byte=memory_read_byte(src_space,dma->source); |
| 748 | | memory_write_byte(dest_space,dma->dest,dma_byte); |
| 749 | | incdec_size=1; |
| 750 | | } |
| 751 | | |
| 752 | | // Increment or Decrement destination ans source pointers as needed |
| 753 | | //logerror("incrementing destination\n"); |
| 754 | | switch (dma->control & DEST_INCDEC_MASK) |
| 755 | | { |
| 756 | | case DEST_DECREMENT : dma->dest -= incdec_size; |
| 757 | | case DEST_INCREMENT : dma->dest += incdec_size; |
| 758 | | } |
| 759 | | |
| 760 | | //logerror("incrementing source\n"); |
| 761 | | switch (dma->control & SRC_INCDEC_MASK) |
| 762 | | { |
| 763 | | case SRC_DECREMENT : dma->source -= incdec_size; |
| 764 | | case SRC_INCREMENT : dma->source += incdec_size; |
| 765 | | } |
| 766 | | |
| 767 | | // decrement count |
| 768 | | dma->count -= 1; |
| 769 | | |
| 770 | | //logerror("Check term on zero\n"); |
| 771 | | // Terminate if count is zero, and terminate flag set |
| 772 | | if((dma->control & TERMINATE_ON_ZERO) && (dma->count==0)) |
| 773 | | { |
| 774 | | dma->control &= ~ST_STOP; |
| 775 | | logerror("DMA terminated\n"); |
| 776 | | } |
| 777 | | |
| 778 | | //logerror("Check int on zero\n"); |
| 779 | | // Interrupt if count is zero, and interrupt flag set |
| 780 | | if((dma->control & INTERRUPT_ON_ZERO) && (dma->count==0)) |
| 781 | | { |
| 782 | | if (LOG_DMA) logerror("DMA%d - requesting interrupt: count = %04X, source = %04X\n", which, dma->count, dma->source); |
| 783 | | i186.intr.request |= 0x04 << which; |
| 784 | | update_interrupt_state(machine); |
| 785 | | } |
| 786 | | //logerror("DMA callback done\n"); |
| 787 | | } |
| 788 | | |
| 789 | | /*-------------------------------------------------------------------------*/ |
| 790 | | /* Name: rmnimbus */ |
| 791 | | /* Desc: CPU - Initialize the 80186 CPU */ |
| 792 | | /*-------------------------------------------------------------------------*/ |
| 793 | | static void nimbus_cpu_init(running_machine *machine) |
| 794 | | { |
| 795 | | |
| 796 | | logerror("Machine reset\n"); |
| 797 | | |
| 798 | | /* create timers here so they stick around */ |
| 799 | | i186.timer[0].int_timer = timer_alloc(machine, internal_timer_int, NULL); |
| 800 | | i186.timer[1].int_timer = timer_alloc(machine, internal_timer_int, NULL); |
| 801 | | i186.timer[2].int_timer = timer_alloc(machine, internal_timer_int, NULL); |
| 802 | | i186.timer[0].time_timer = timer_alloc(machine, NULL, NULL); |
| 803 | | i186.timer[1].time_timer = timer_alloc(machine, NULL, NULL); |
| 804 | | i186.timer[2].time_timer = timer_alloc(machine, NULL, NULL); |
| 805 | | i186.dma[0].finish_timer = timer_alloc(machine, dma_timer_callback, NULL); |
| 806 | | i186.dma[1].finish_timer = timer_alloc(machine, dma_timer_callback, NULL); |
| 807 | | } |
| 808 | | |
| 809 | | static void nimbus_cpu_reset(running_machine *machine) |
| 810 | | { |
| 811 | | /* reset the interrupt state */ |
| 812 | | i186.intr.priority_mask = 0x0007; |
| 813 | | i186.intr.timer = 0x000f; |
| 814 | | i186.intr.dma[0] = 0x000f; |
| 815 | | i186.intr.dma[1] = 0x000f; |
| 816 | | i186.intr.ext[0] = 0x000f; |
| 817 | | i186.intr.ext[1] = 0x000f; |
| 818 | | i186.intr.ext[2] = 0x000f; |
| 819 | | i186.intr.ext[3] = 0x000f; |
| 820 | | i186.intr.in_service = 0x0000; |
| 821 | | |
| 822 | | /* External vectors by default to internal int 0/1 vectors */ |
| 823 | | i186.intr.ext_vector[0] = 0x000C; |
| 824 | | i186.intr.ext_vector[1] = 0x000D; |
| 825 | | |
| 826 | | i186.intr.pending = 0x0000; |
| 827 | | i186.intr.ack_mask = 0x0000; |
| 828 | | i186.intr.request = 0x0000; |
| 829 | | i186.intr.status = 0x0000; |
| 830 | | i186.intr.poll_status = 0x0000; |
| 831 | | |
| 832 | | logerror("CPU reset done\n"); |
| 833 | | } |
| 834 | | |
| 835 | | READ16_HANDLER( i186_internal_port_r ) |
| 836 | | { |
| 837 | | int temp, which; |
| 838 | | |
| 839 | | switch (offset) |
| 840 | | { |
| 841 | | case 0x11: |
| 842 | | logerror("%05X:ERROR - read from 80186 EOI\n", cpu_get_pc(space->cpu)); |
| 843 | | break; |
| 844 | | |
| 845 | | case 0x12: |
| 846 | | if (LOG_PORTS) logerror("%05X:read 80186 interrupt poll\n", cpu_get_pc(space->cpu)); |
| 847 | | if (i186.intr.poll_status & 0x8000) |
| 848 | | int_callback(cputag_get_cpu(space->machine, MAINCPU_TAG), 0); |
| 849 | | return i186.intr.poll_status; |
| 850 | | |
| 851 | | case 0x13: |
| 852 | | if (LOG_PORTS) logerror("%05X:read 80186 interrupt poll status\n", cpu_get_pc(space->cpu)); |
| 853 | | return i186.intr.poll_status; |
| 854 | | |
| 855 | | case 0x14: |
| 856 | | if (LOG_PORTS) logerror("%05X:read 80186 interrupt mask\n", cpu_get_pc(space->cpu)); |
| 857 | | temp = (i186.intr.timer >> 3) & 0x01; |
| 858 | | temp |= (i186.intr.dma[0] >> 1) & 0x04; |
| 859 | | temp |= (i186.intr.dma[1] >> 0) & 0x08; |
| 860 | | temp |= (i186.intr.ext[0] << 1) & 0x10; |
| 861 | | temp |= (i186.intr.ext[1] << 2) & 0x20; |
| 862 | | temp |= (i186.intr.ext[2] << 3) & 0x40; |
| 863 | | temp |= (i186.intr.ext[3] << 4) & 0x80; |
| 864 | | return temp; |
| 865 | | |
| 866 | | case 0x15: |
| 867 | | if (LOG_PORTS) logerror("%05X:read 80186 interrupt priority mask\n", cpu_get_pc(space->cpu)); |
| 868 | | return i186.intr.priority_mask; |
| 869 | | |
| 870 | | case 0x16: |
| 871 | | if (LOG_PORTS) logerror("%05X:read 80186 interrupt in-service\n", cpu_get_pc(space->cpu)); |
| 872 | | return i186.intr.in_service; |
| 873 | | |
| 874 | | case 0x17: |
| 875 | | if (LOG_PORTS) logerror("%05X:read 80186 interrupt request\n", cpu_get_pc(space->cpu)); |
| 876 | | temp = i186.intr.request & ~0x0001; |
| 877 | | if (i186.intr.status & 0x0007) |
| 878 | | temp |= 1; |
| 879 | | return temp; |
| 880 | | |
| 881 | | case 0x18: |
| 882 | | if (LOG_PORTS) logerror("%05X:read 80186 interrupt status\n", cpu_get_pc(space->cpu)); |
| 883 | | return i186.intr.status; |
| 884 | | |
| 885 | | case 0x19: |
| 886 | | if (LOG_PORTS) logerror("%05X:read 80186 timer interrupt control\n", cpu_get_pc(space->cpu)); |
| 887 | | return i186.intr.timer; |
| 888 | | |
| 889 | | case 0x1a: |
| 890 | | if (LOG_PORTS) logerror("%05X:read 80186 DMA 0 interrupt control\n", cpu_get_pc(space->cpu)); |
| 891 | | return i186.intr.dma[0]; |
| 892 | | |
| 893 | | case 0x1b: |
| 894 | | if (LOG_PORTS) logerror("%05X:read 80186 DMA 1 interrupt control\n", cpu_get_pc(space->cpu)); |
| 895 | | return i186.intr.dma[1]; |
| 896 | | |
| 897 | | case 0x1c: |
| 898 | | if (LOG_PORTS) logerror("%05X:read 80186 INT 0 interrupt control\n", cpu_get_pc(space->cpu)); |
| 899 | | return i186.intr.ext[0]; |
| 900 | | |
| 901 | | case 0x1d: |
| 902 | | if (LOG_PORTS) logerror("%05X:read 80186 INT 1 interrupt control\n", cpu_get_pc(space->cpu)); |
| 903 | | return i186.intr.ext[1]; |
| 904 | | |
| 905 | | case 0x1e: |
| 906 | | if (LOG_PORTS) logerror("%05X:read 80186 INT 2 interrupt control\n", cpu_get_pc(space->cpu)); |
| 907 | | return i186.intr.ext[2]; |
| 908 | | |
| 909 | | case 0x1f: |
| 910 | | if (LOG_PORTS) logerror("%05X:read 80186 INT 3 interrupt control\n", cpu_get_pc(space->cpu)); |
| 911 | | return i186.intr.ext[3]; |
| 912 | | |
| 913 | | case 0x28: |
| 914 | | case 0x2c: |
| 915 | | case 0x30: |
| 916 | | if (LOG_PORTS) logerror("%05X:read 80186 Timer %d count\n", cpu_get_pc(space->cpu), (offset - 0x28) / 4); |
| 917 | | which = (offset - 0x28) / 4; |
| 918 | | if (!(offset & 1)) |
| 919 | | internal_timer_sync(which); |
| 920 | | return i186.timer[which].count; |
| 921 | | |
| 922 | | case 0x29: |
| 923 | | case 0x2d: |
| 924 | | case 0x31: |
| 925 | | if (LOG_PORTS) logerror("%05X:read 80186 Timer %d max A\n", cpu_get_pc(space->cpu), (offset - 0x29) / 4); |
| 926 | | which = (offset - 0x29) / 4; |
| 927 | | return i186.timer[which].maxA; |
| 928 | | |
| 929 | | case 0x2a: |
| 930 | | case 0x2e: |
| 931 | | logerror("%05X:read 80186 Timer %d max B\n", cpu_get_pc(space->cpu), (offset - 0x2a) / 4); |
| 932 | | which = (offset - 0x2a) / 4; |
| 933 | | return i186.timer[which].maxB; |
| 934 | | |
| 935 | | case 0x2b: |
| 936 | | case 0x2f: |
| 937 | | case 0x33: |
| 938 | | if (LOG_PORTS) logerror("%05X:read 80186 Timer %d control\n", cpu_get_pc(space->cpu), (offset - 0x2b) / 4); |
| 939 | | which = (offset - 0x2b) / 4; |
| 940 | | return i186.timer[which].control; |
| 941 | | |
| 942 | | case 0x50: |
| 943 | | if (LOG_PORTS) logerror("%05X:read 80186 upper chip select\n", cpu_get_pc(space->cpu)); |
| 944 | | return i186.mem.upper; |
| 945 | | |
| 946 | | case 0x51: |
| 947 | | if (LOG_PORTS) logerror("%05X:read 80186 lower chip select\n", cpu_get_pc(space->cpu)); |
| 948 | | return i186.mem.lower; |
| 949 | | |
| 950 | | case 0x52: |
| 951 | | if (LOG_PORTS) logerror("%05X:read 80186 peripheral chip select\n", cpu_get_pc(space->cpu)); |
| 952 | | return i186.mem.peripheral; |
| 953 | | |
| 954 | | case 0x53: |
| 955 | | if (LOG_PORTS) logerror("%05X:read 80186 middle chip select\n", cpu_get_pc(space->cpu)); |
| 956 | | return i186.mem.middle; |
| 957 | | |
| 958 | | case 0x54: |
| 959 | | if (LOG_PORTS) logerror("%05X:read 80186 middle P chip select\n", cpu_get_pc(space->cpu)); |
| 960 | | return i186.mem.middle_size; |
| 961 | | |
| 962 | | case 0x60: |
| 963 | | case 0x68: |
| 964 | | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d lower source address\n", cpu_get_pc(space->cpu), (offset - 0x60) / 8); |
| 965 | | which = (offset - 0x60) / 8; |
| 966 | | // stream_update(dma_stream, 0); |
| 967 | | return i186.dma[which].source; |
| 968 | | |
| 969 | | case 0x61: |
| 970 | | case 0x69: |
| 971 | | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d upper source address\n", cpu_get_pc(space->cpu), (offset - 0x61) / 8); |
| 972 | | which = (offset - 0x61) / 8; |
| 973 | | // stream_update(dma_stream, 0); |
| 974 | | return i186.dma[which].source >> 16; |
| 975 | | |
| 976 | | case 0x62: |
| 977 | | case 0x6a: |
| 978 | | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d lower dest address\n", cpu_get_pc(space->cpu), (offset - 0x62) / 8); |
| 979 | | which = (offset - 0x62) / 8; |
| 980 | | // stream_update(dma_stream, 0); |
| 981 | | return i186.dma[which].dest; |
| 982 | | |
| 983 | | case 0x63: |
| 984 | | case 0x6b: |
| 985 | | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d upper dest address\n", cpu_get_pc(space->cpu), (offset - 0x63) / 8); |
| 986 | | which = (offset - 0x63) / 8; |
| 987 | | // stream_update(dma_stream, 0); |
| 988 | | return i186.dma[which].dest >> 16; |
| 989 | | |
| 990 | | case 0x64: |
| 991 | | case 0x6c: |
| 992 | | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d transfer count\n", cpu_get_pc(space->cpu), (offset - 0x64) / 8); |
| 993 | | which = (offset - 0x64) / 8; |
| 994 | | // stream_update(dma_stream, 0); |
| 995 | | return i186.dma[which].count; |
| 996 | | |
| 997 | | case 0x65: |
| 998 | | case 0x6d: |
| 999 | | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d control\n", cpu_get_pc(space->cpu), (offset - 0x65) / 8); |
| 1000 | | which = (offset - 0x65) / 8; |
| 1001 | | // stream_update(dma_stream, 0); |
| 1002 | | return i186.dma[which].control; |
| 1003 | | |
| 1004 | | default: |
| 1005 | | logerror("%05X:read 80186 port %02X\n", cpu_get_pc(space->cpu), offset); |
| 1006 | | break; |
| 1007 | | } |
| 1008 | | return 0x00; |
| 1009 | | } |
| 1010 | | |
| 1011 | | /************************************* |
| 1012 | | * |
| 1013 | | * 80186 internal I/O writes |
| 1014 | | * |
| 1015 | | *************************************/ |
| 1016 | | |
| 1017 | | WRITE16_HANDLER( i186_internal_port_w ) |
| 1018 | | { |
| 1019 | | int temp, which, data16 = data; |
| 1020 | | |
| 1021 | | switch (offset) |
| 1022 | | { |
| 1023 | | case 0x11: |
| 1024 | | if (LOG_PORTS) logerror("%05X:80186 EOI = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1025 | | handle_eoi(space->machine,0x8000); |
| 1026 | | update_interrupt_state(space->machine); |
| 1027 | | break; |
| 1028 | | |
| 1029 | | case 0x12: |
| 1030 | | logerror("%05X:ERROR - write to 80186 interrupt poll = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1031 | | break; |
| 1032 | | |
| 1033 | | case 0x13: |
| 1034 | | logerror("%05X:ERROR - write to 80186 interrupt poll status = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1035 | | break; |
| 1036 | | |
| 1037 | | case 0x14: |
| 1038 | | if (LOG_PORTS) logerror("%05X:80186 interrupt mask = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1039 | | i186.intr.timer = (i186.intr.timer & ~0x08) | ((data16 << 3) & 0x08); |
| 1040 | | i186.intr.dma[0] = (i186.intr.dma[0] & ~0x08) | ((data16 << 1) & 0x08); |
| 1041 | | i186.intr.dma[1] = (i186.intr.dma[1] & ~0x08) | ((data16 << 0) & 0x08); |
| 1042 | | i186.intr.ext[0] = (i186.intr.ext[0] & ~0x08) | ((data16 >> 1) & 0x08); |
| 1043 | | i186.intr.ext[1] = (i186.intr.ext[1] & ~0x08) | ((data16 >> 2) & 0x08); |
| 1044 | | i186.intr.ext[2] = (i186.intr.ext[2] & ~0x08) | ((data16 >> 3) & 0x08); |
| 1045 | | i186.intr.ext[3] = (i186.intr.ext[3] & ~0x08) | ((data16 >> 4) & 0x08); |
| 1046 | | update_interrupt_state(space->machine); |
| 1047 | | break; |
| 1048 | | |
| 1049 | | case 0x15: |
| 1050 | | if (LOG_PORTS) logerror("%05X:80186 interrupt priority mask = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1051 | | i186.intr.priority_mask = data16 & 0x0007; |
| 1052 | | update_interrupt_state(space->machine); |
| 1053 | | break; |
| 1054 | | |
| 1055 | | case 0x16: |
| 1056 | | if (LOG_PORTS) logerror("%05X:80186 interrupt in-service = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1057 | | i186.intr.in_service = data16 & 0x00ff; |
| 1058 | | update_interrupt_state(space->machine); |
| 1059 | | break; |
| 1060 | | |
| 1061 | | case 0x17: |
| 1062 | | if (LOG_PORTS) logerror("%05X:80186 interrupt request = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1063 | | i186.intr.request = (i186.intr.request & ~0x00c0) | (data16 & 0x00c0); |
| 1064 | | update_interrupt_state(space->machine); |
| 1065 | | break; |
| 1066 | | |
| 1067 | | case 0x18: |
| 1068 | | if (LOG_PORTS) logerror("%05X:WARNING - wrote to 80186 interrupt status = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1069 | | i186.intr.status = (i186.intr.status & ~0x8007) | (data16 & 0x8007); |
| 1070 | | update_interrupt_state(space->machine); |
| 1071 | | break; |
| 1072 | | |
| 1073 | | case 0x19: |
| 1074 | | if (LOG_PORTS) logerror("%05X:80186 timer interrupt contol = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1075 | | i186.intr.timer = data16 & 0x000f; |
| 1076 | | break; |
| 1077 | | |
| 1078 | | case 0x1a: |
| 1079 | | if (LOG_PORTS) logerror("%05X:80186 DMA 0 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1080 | | i186.intr.dma[0] = data16 & 0x000f; |
| 1081 | | break; |
| 1082 | | |
| 1083 | | case 0x1b: |
| 1084 | | if (LOG_PORTS) logerror("%05X:80186 DMA 1 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1085 | | i186.intr.dma[1] = data16 & 0x000f; |
| 1086 | | break; |
| 1087 | | |
| 1088 | | case 0x1c: |
| 1089 | | if (LOG_PORTS) logerror("%05X:80186 INT 0 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1090 | | i186.intr.ext[0] = data16 & 0x007f; |
| 1091 | | break; |
| 1092 | | |
| 1093 | | case 0x1d: |
| 1094 | | if (LOG_PORTS) logerror("%05X:80186 INT 1 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1095 | | i186.intr.ext[1] = data16 & 0x007f; |
| 1096 | | break; |
| 1097 | | |
| 1098 | | case 0x1e: |
| 1099 | | if (LOG_PORTS) logerror("%05X:80186 INT 2 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1100 | | i186.intr.ext[2] = data16 & 0x001f; |
| 1101 | | break; |
| 1102 | | |
| 1103 | | case 0x1f: |
| 1104 | | if (LOG_PORTS) logerror("%05X:80186 INT 3 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1105 | | i186.intr.ext[3] = data16 & 0x001f; |
| 1106 | | break; |
| 1107 | | |
| 1108 | | case 0x28: |
| 1109 | | case 0x2c: |
| 1110 | | case 0x30: |
| 1111 | | if (LOG_PORTS) logerror("%05X:80186 Timer %d count = %04X\n", cpu_get_pc(space->cpu), (offset - 0x28) / 4, data16); |
| 1112 | | which = (offset - 0x28) / 4; |
| 1113 | | internal_timer_update(space->machine,which, data16, -1, -1, -1); |
| 1114 | | break; |
| 1115 | | |
| 1116 | | case 0x29: |
| 1117 | | case 0x2d: |
| 1118 | | case 0x31: |
| 1119 | | if (LOG_PORTS) logerror("%05X:80186 Timer %d max A = %04X\n", cpu_get_pc(space->cpu), (offset - 0x29) / 4, data16); |
| 1120 | | which = (offset - 0x29) / 4; |
| 1121 | | internal_timer_update(space->machine,which, -1, data16, -1, -1); |
| 1122 | | break; |
| 1123 | | |
| 1124 | | case 0x2a: |
| 1125 | | case 0x2e: |
| 1126 | | if (LOG_PORTS) logerror("%05X:80186 Timer %d max B = %04X\n", cpu_get_pc(space->cpu), (offset - 0x2a) / 4, data16); |
| 1127 | | which = (offset - 0x2a) / 4; |
| 1128 | | internal_timer_update(space->machine,which, -1, -1, data16, -1); |
| 1129 | | break; |
| 1130 | | |
| 1131 | | case 0x2b: |
| 1132 | | case 0x2f: |
| 1133 | | case 0x33: |
| 1134 | | if (LOG_PORTS) logerror("%05X:80186 Timer %d control = %04X\n", cpu_get_pc(space->cpu), (offset - 0x2b) / 4, data16); |
| 1135 | | which = (offset - 0x2b) / 4; |
| 1136 | | internal_timer_update(space->machine,which, -1, -1, -1, data16); |
| 1137 | | break; |
| 1138 | | |
| 1139 | | case 0x50: |
| 1140 | | if (LOG_PORTS) logerror("%05X:80186 upper chip select = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1141 | | i186.mem.upper = data16 | 0xc038; |
| 1142 | | break; |
| 1143 | | |
| 1144 | | case 0x51: |
| 1145 | | if (LOG_PORTS) logerror("%05X:80186 lower chip select = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1146 | | i186.mem.lower = (data16 & 0x3fff) | 0x0038; printf("%X",i186.mem.lower); |
| 1147 | | break; |
| 1148 | | |
| 1149 | | case 0x52: |
| 1150 | | if (LOG_PORTS) logerror("%05X:80186 peripheral chip select = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1151 | | i186.mem.peripheral = data16 | 0x0038; |
| 1152 | | break; |
| 1153 | | |
| 1154 | | case 0x53: |
| 1155 | | if (LOG_PORTS) logerror("%05X:80186 middle chip select = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1156 | | i186.mem.middle = data16 | 0x01f8; |
| 1157 | | break; |
| 1158 | | |
| 1159 | | case 0x54: |
| 1160 | | if (LOG_PORTS) logerror("%05X:80186 middle P chip select = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1161 | | i186.mem.middle_size = data16 | 0x8038; |
| 1162 | | |
| 1163 | | temp = (i186.mem.peripheral & 0xffc0) << 4; |
| 1164 | | if (i186.mem.middle_size & 0x0040) |
| 1165 | | { |
| 1166 | | // install_mem_read_handler(2, temp, temp + 0x2ff, peripheral_r); |
| 1167 | | // install_mem_write_handler(2, temp, temp + 0x2ff, peripheral_w); |
| 1168 | | } |
| 1169 | | else |
| 1170 | | { |
| 1171 | | temp &= 0xffff; |
| 1172 | | // install_port_read_handler(2, temp, temp + 0x2ff, peripheral_r); |
| 1173 | | // install_port_write_handler(2, temp, temp + 0x2ff, peripheral_w); |
| 1174 | | } |
| 1175 | | |
| 1176 | | /* we need to do this at a time when the I86 context is swapped in */ |
| 1177 | | /* this register is generally set once at startup and never again, so it's a good */ |
| 1178 | | /* time to set it up */ |
| 1179 | | cpu_set_irq_callback(space->cpu, int_callback); |
| 1180 | | break; |
| 1181 | | |
| 1182 | | case 0x60: |
| 1183 | | case 0x68: |
| 1184 | | if (LOG_PORTS) logerror("%05X:80186 DMA%d lower source address = %04X\n", cpu_get_pc(space->cpu), (offset - 0x60) / 8, data16); |
| 1185 | | which = (offset - 0x60) / 8; |
| 1186 | | // stream_update(dma_stream, 0); |
| 1187 | | i186.dma[which].source = (i186.dma[which].source & ~0x0ffff) | (data16 & 0x0ffff); |
| 1188 | | break; |
| 1189 | | |
| 1190 | | case 0x61: |
| 1191 | | case 0x69: |
| 1192 | | if (LOG_PORTS) logerror("%05X:80186 DMA%d upper source address = %04X\n", cpu_get_pc(space->cpu), (offset - 0x61) / 8, data16); |
| 1193 | | which = (offset - 0x61) / 8; |
| 1194 | | // stream_update(dma_stream, 0); |
| 1195 | | i186.dma[which].source = (i186.dma[which].source & ~0xf0000) | ((data16 << 16) & 0xf0000); |
| 1196 | | break; |
| 1197 | | |
| 1198 | | case 0x62: |
| 1199 | | case 0x6a: |
| 1200 | | if (LOG_PORTS) logerror("%05X:80186 DMA%d lower dest address = %04X\n", cpu_get_pc(space->cpu), (offset - 0x62) / 8, data16); |
| 1201 | | which = (offset - 0x62) / 8; |
| 1202 | | // stream_update(dma_stream, 0); |
| 1203 | | i186.dma[which].dest = (i186.dma[which].dest & ~0x0ffff) | (data16 & 0x0ffff); |
| 1204 | | break; |
| 1205 | | |
| 1206 | | case 0x63: |
| 1207 | | case 0x6b: |
| 1208 | | if (LOG_PORTS) logerror("%05X:80186 DMA%d upper dest address = %04X\n", cpu_get_pc(space->cpu), (offset - 0x63) / 8, data16); |
| 1209 | | which = (offset - 0x63) / 8; |
| 1210 | | // stream_update(dma_stream, 0); |
| 1211 | | i186.dma[which].dest = (i186.dma[which].dest & ~0xf0000) | ((data16 << 16) & 0xf0000); |
| 1212 | | break; |
| 1213 | | |
| 1214 | | case 0x64: |
| 1215 | | case 0x6c: |
| 1216 | | if (LOG_PORTS) logerror("%05X:80186 DMA%d transfer count = %04X\n", cpu_get_pc(space->cpu), (offset - 0x64) / 8, data16); |
| 1217 | | which = (offset - 0x64) / 8; |
| 1218 | | // stream_update(dma_stream, 0); |
| 1219 | | i186.dma[which].count = data16; |
| 1220 | | break; |
| 1221 | | |
| 1222 | | case 0x65: |
| 1223 | | case 0x6d: |
| 1224 | | if (LOG_PORTS) logerror("%05X:80186 DMA%d control = %04X\n", cpu_get_pc(space->cpu), (offset - 0x65) / 8, data16); |
| 1225 | | which = (offset - 0x65) / 8; |
| 1226 | | // stream_update(dma_stream, 0); |
| 1227 | | update_dma_control(space->machine, which, data16); |
| 1228 | | break; |
| 1229 | | |
| 1230 | | case 0x7f: |
| 1231 | | if (LOG_PORTS) logerror("%05X:80186 relocation register = %04X\n", cpu_get_pc(space->cpu), data16); |
| 1232 | | |
| 1233 | | /* we assume here there that this doesn't happen too often */ |
| 1234 | | /* plus, we can't really remove the old memory range, so we also assume that it's */ |
| 1235 | | /* okay to leave us mapped where we were */ |
| 1236 | | temp = (data16 & 0x0fff) << 8; |
| 1237 | | if (data16 & 0x1000) |
| 1238 | | { |
| 1239 | | memory_install_read16_handler(cputag_get_address_space(space->machine, MAINCPU_TAG, ADDRESS_SPACE_PROGRAM), temp, temp + 0xff, 0, 0, i186_internal_port_r); |
| 1240 | | memory_install_write16_handler(cputag_get_address_space(space->machine, MAINCPU_TAG, ADDRESS_SPACE_PROGRAM), temp, temp + 0xff, 0, 0, i186_internal_port_w); |
| 1241 | | } |
| 1242 | | else |
| 1243 | | { |
| 1244 | | temp &= 0xffff; |
| 1245 | | memory_install_read16_handler(cputag_get_address_space(space->machine, MAINCPU_TAG, ADDRESS_SPACE_IO), temp, temp + 0xff, 0, 0, i186_internal_port_r); |
| 1246 | | memory_install_write16_handler(cputag_get_address_space(space->machine, MAINCPU_TAG, ADDRESS_SPACE_IO), temp, temp + 0xff, 0, 0, i186_internal_port_w); |
| 1247 | | } |
| 1248 | | /* popmessage("Sound CPU reset");*/ |
| 1249 | | break; |
| 1250 | | |
| 1251 | | default: |
| 1252 | | logerror("%05X:80186 port %02X = %04X\n", cpu_get_pc(space->cpu), offset, data16); |
| 1253 | | break; |
| 1254 | | } |
| 1255 | | } |
| 1256 | | |
| 1257 | | MACHINE_RESET(nimbus) |
| 1258 | | { |
| 1259 | | /* CPU */ |
| 1260 | | nimbus_cpu_reset(machine); |
| 1261 | | fdc_reset(); |
| 1262 | | keyboard_reset(); |
| 1263 | | } |
| 1264 | | |
| 1265 | | DRIVER_INIT(nimbus) |
| 1266 | | { |
| 1267 | | } |
| 1268 | | |
| 1269 | | MACHINE_START( nimbus ) |
| 1270 | | { |
| 1271 | | /* init cpu */ |
| 1272 | | nimbus_cpu_init(machine); |
| 1273 | | |
| 1274 | | keyboard.keyscan_timer=timer_alloc(machine, keyscan_callback, NULL); |
| 1275 | | |
| 1276 | | /* setup debug commands */ |
| 1277 | | if (machine->debug_flags & DEBUG_FLAG_ENABLED) |
| 1278 | | { |
| 1279 | | debug_console_register_command(machine, "nimbus_irq", CMDFLAG_NONE, 0, 0, 1, execute_debug_irq); |
| 1280 | | debug_console_register_command(machine, "nimbus_intmasks", CMDFLAG_NONE, 0, 0, 0, execute_debug_intmasks); |
| 1281 | | |
| 1282 | | /* set up the instruction hook */ |
| 1283 | | debug_cpu_set_instruction_hook(cputag_get_cpu(machine, MAINCPU_TAG), instruction_hook); |
| 1284 | | |
| 1285 | | } |
| 1286 | | } |
| 1287 | | |
| 1288 | | static void execute_debug_irq(running_machine *machine, int ref, int params, const char *param[]) |
| 1289 | | { |
| 1290 | | int IntNo; |
| 1291 | | int IntMask; |
| 1292 | | |
| 1293 | | if(params>0) |
| 1294 | | { |
| 1295 | | sscanf(param[0],"%d",&IntNo); |
| 1296 | | |
| 1297 | | IntMask=0x0000; |
| 1298 | | |
| 1299 | | switch (IntNo) |
| 1300 | | { |
| 1301 | | case 0 : IntMask=0x010; break; |
| 1302 | | case 1 : IntMask=0x020; break; |
| 1303 | | case 2 : IntMask=0x040; break; |
| 1304 | | case 3 : IntMask=0x080; break; |
| 1305 | | } |
| 1306 | | |
| 1307 | | i186.intr.request |= IntMask; |
| 1308 | | update_interrupt_state(machine); |
| 1309 | | |
| 1310 | | debug_console_printf(machine,"triggering IRQ%d, IntMask=%4.4X, i186.intr.request=%4.4X\n",IntNo,IntMask,i186.intr.request); |
| 1311 | | |
| 1312 | | // cputag_set_input_line(machine, MAINCPU_TAG, IntNo, HOLD_LINE ); |
| 1313 | | // cputag_set_input_line(machine, MAINCPU_TAG, IntNo, CLEAR_LINE ); |
| 1314 | | |
| 1315 | | } |
| 1316 | | else |
| 1317 | | { |
| 1318 | | debug_console_printf(machine,"Error, you must supply an intno to trigger\n"); |
| 1319 | | } |
| 1320 | | |
| 1321 | | |
| 1322 | | } |
| 1323 | | |
| 1324 | | |
| 1325 | | static void execute_debug_intmasks(running_machine *machine, int ref, int params, const char *param[]) |
| 1326 | | { |
| 1327 | | int IntNo; |
| 1328 | | |
| 1329 | | |
| 1330 | | debug_console_printf(machine,"i186.intr.priority_mask=%4X\n",i186.intr.priority_mask); |
| 1331 | | for(IntNo=0; IntNo<4; IntNo++) |
| 1332 | | { |
| 1333 | | debug_console_printf(machine,"extInt%d mask=%4X\n",IntNo,i186.intr.ext[IntNo]); |
| 1334 | | } |
| 1335 | | |
| 1336 | | debug_console_printf(machine,"i186.intr.request = %04X\n",i186.intr.request); |
| 1337 | | debug_console_printf(machine,"i186.intr.ack_mask = %04X\n",i186.intr.ack_mask); |
| 1338 | | debug_console_printf(machine,"i186.intr.in_service= %04X\n",i186.intr.in_service); |
| 1339 | | } |
| 1340 | | |
| 1341 | | /*----------------------------------------------- |
| 1342 | | instruction_hook - per-instruction hook |
| 1343 | | -----------------------------------------------*/ |
| 1344 | | |
| 1345 | | static int instruction_hook(const device_config *device, offs_t curpc) |
| 1346 | | { |
| 1347 | | const address_space *space = cpu_get_address_space(device, ADDRESS_SPACE_PROGRAM); |
| 1348 | | UINT8 *addr_ptr; |
| 1349 | | |
| 1350 | | addr_ptr = memory_get_read_ptr(space,curpc); |
| 1351 | | |
| 1352 | | if ((addr_ptr !=NULL) && (addr_ptr[0]==0xCD) && (addr_ptr[1]==0xF0)) |
| 1353 | | decode_subbios(device,curpc); |
| 1354 | | |
| 1355 | | return 0; |
| 1356 | | } |
| 1357 | | |
| 1358 | | #define set_type(type_name) sprintf(type_str,type_name) |
| 1359 | | #define set_drv(drv_name) sprintf(drv_str,drv_name) |
| 1360 | | #define set_func(func_name) sprintf(func_str,func_name) |
| 1361 | | |
| 1362 | | static void decode_subbios(const device_config *device,offs_t pc) |
| 1363 | | { |
| 1364 | | char type_str[80]; |
| 1365 | | char drv_str[80]; |
| 1366 | | char func_str[80]; |
| 1367 | | |
| 1368 | | void (*dump_dssi)(const device_config *,UINT16, UINT16) = NULL; |
| 1369 | | |
| 1370 | | const device_config *cpu = cputag_get_cpu(device->machine,MAINCPU_TAG); |
| 1371 | | |
| 1372 | | UINT16 ax = cpu_get_reg(cpu,I8086_AX); |
| 1373 | | UINT16 bx = cpu_get_reg(cpu,I8086_BX); |
| 1374 | | UINT16 cx = cpu_get_reg(cpu,I8086_CX); |
| 1375 | | UINT16 ds = cpu_get_reg(cpu,I8086_DS); |
| 1376 | | UINT16 si = cpu_get_reg(cpu,I8086_SI); |
| 1377 | | |
| 1378 | | logerror("=======================================================================\n"); |
| 1379 | | logerror("Sub-bios call at %08X, AX=%04X, BX=%04X, CX=%04X, DS:SI=%04X:%04X\n",pc,ax,bx,cx,ds,si); |
| 1380 | | |
| 1381 | | set_type("invalid"); |
| 1382 | | set_drv("invalid"); |
| 1383 | | set_func("invalid"); |
| 1384 | | |
| 1385 | | |
| 1386 | | switch (cx) |
| 1387 | | { |
| 1388 | | case 0 : |
| 1389 | | { |
| 1390 | | set_type("t_mummu"); |
| 1391 | | set_drv("d_mummu"); |
| 1392 | | |
| 1393 | | switch (ax) |
| 1394 | | { |
| 1395 | | case 0 : set_func("f_get_version_number"); break; |
| 1396 | | case 1 : set_func("f_add_type_code"); break; |
| 1397 | | case 2 : set_func("f_del_typc_code"); break; |
| 1398 | | case 3 : set_func("f_get_TCB"); break; |
| 1399 | | case 4 : set_func("f_add_driver_cdoe"); break; |
| 1400 | | case 5 : set_func("f_del_driver_code"); break; |
| 1401 | | case 6 : set_func("f_get_DCB"); break; |
| 1402 | | case 7 : set_func("f_get_copyright"); break; |
| 1403 | | } |
| 1404 | | }; break; |
| 1405 | | |
| 1406 | | case 1 : |
| 1407 | | { |
| 1408 | | set_type("t_character"); |
| 1409 | | set_drv("d_printer"); |
| 1410 | | |
| 1411 | | switch(ax) |
| 1412 | | { |
| 1413 | | case 0 : set_func("f_get_version_number"); break; |
| 1414 | | case 1 : set_func("f_get_output_status"); break; |
| 1415 | | case 2 : set_func("f_output_character"); break; |
| 1416 | | case 3 : set_func("f_get_input_status"); break; |
| 1417 | | case 4 : set_func("f_get_and_remove"); break; |
| 1418 | | case 5 : set_func("f_get_no_remove"); break; |
| 1419 | | case 6 : set_func("f_get_last_and_remove"); break; |
| 1420 | | case 7 : set_func("f_get_last_no_remove"); break; |
| 1421 | | case 8 : set_func("f_set_IO_parameters"); break; |
| 1422 | | } |
| 1423 | | }; break; |
| 1424 | | |
| 1425 | | case 2 : |
| 1426 | | { |
| 1427 | | set_type("t_disk"); |
| 1428 | | |
| 1429 | | switch(bx) |
| 1430 | | { |
| 1431 | | case 0 : set_drv("d_floppy"); break; |
| 1432 | | case 1 : set_drv("d_winchester"); break; |
| 1433 | | case 2 : set_drv("d_tape"); break; |
| 1434 | | case 3 : set_drv("d_rompack"); break; |
| 1435 | | case 4 : set_drv("d_eeprom"); break; |
| 1436 | | } |
| 1437 | | |
| 1438 | | switch(ax) |
| 1439 | | { |
| 1440 | | case 0 : set_func("f_get_version_number"); break; |
| 1441 | | case 1 : set_func("f_initialise_unit"); break; |
| 1442 | | case 2 : set_func("f_pseudo_init_unit"); break; |
| 1443 | | case 3 : set_func("f_get_device_status"); break; |
| 1444 | | case 4 : set_func("f_read_n_sectors"); break; |
| 1445 | | case 5 : set_func("f_write_n_sectors"); break; |
| 1446 | | case 6 : set_func("f_verify_n_sectors"); break; |
| 1447 | | case 7 : set_func("f_media_check"); break; |
| 1448 | | case 8 : set_func("f_recalibrate"); break; |
| 1449 | | case 9 : set_func("f_motors_off"); break; |
| 1450 | | } |
| 1451 | | |
| 1452 | | }; break; |
| 1453 | | |
| 1454 | | case 3 : |
| 1455 | | { |
| 1456 | | set_type("t_piconet"); |
| 1457 | | switch(ax) |
| 1458 | | { |
| 1459 | | case 0 : set_func("f_get_version_number"); break; |
| 1460 | | } |
| 1461 | | }; break; |
| 1462 | | |
| 1463 | | case 4 : |
| 1464 | | { |
| 1465 | | set_type("t_tick"); |
| 1466 | | set_drv("d_tick"); |
| 1467 | | |
| 1468 | | switch(ax) |
| 1469 | | { |
| 1470 | | case 0 : set_func("f_get_version_number"); break; |
| 1471 | | case 1 : set_func("f_ticks_per_second"); break; |
| 1472 | | case 2 : set_func("f_link_tick_routine"); break; |
| 1473 | | case 3 : set_func("f_unlink_tick_routine"); break; |
| 1474 | | } |
| 1475 | | }; break; |
| 1476 | | |
| 1477 | | case 5 : |
| 1478 | | { |
| 1479 | | set_type("t_graphics_input"); |
| 1480 | | switch(ax) |
| 1481 | | { |
| 1482 | | case 0 : set_func("f_get_version_number"); break; |
| 1483 | | } |
| 1484 | | }; break; |
| 1485 | | |
| 1486 | | case 6 : |
| 1487 | | { |
| 1488 | | set_type("t_graphics_output"); |
| 1489 | | set_drv("d_ngc_screen"); |
| 1490 | | |
| 1491 | | switch(ax) |
| 1492 | | { |
| 1493 | | case 0 : set_func("f_get_version_number"); break; |
| 1494 | | case 1 : set_func("f_graphics_output_cold_start"); break; |
| 1495 | | case 2 : set_func("f_graphics_output_warm_start"); break; |
| 1496 | | case 3 : set_func("f_graphics_output_off"); break; |
| 1497 | | case 4 : set_func("f_reinit_graphics_output"); break; |
| 1498 | | case 5 : set_func("f_polymarker"); break; |
| 1499 | | case 6 : set_func("f_polyline"); break; |
| 1500 | | case 7 : set_func("f_fill_area"); dump_dssi=&decode_dssi_f_fill_area; break; |
| 1501 | | case 8 : set_func("f_flood_fill_area"); break; |
| 1502 | | case 9 : set_func("f_plot_character_string"); dump_dssi=&decode_dssi_f_plot_character_string; break; |
| 1503 | | case 10 : set_func("f_define_graphics_clipping_area"); break; |
| 1504 | | case 11 : set_func("f_enquire_clipping_area_limits"); break; |
| 1505 | | case 12 : set_func("f_select_graphics_clipping_area"); break; |
| 1506 | | case 13 : set_func("f_enq_selctd_graphics_clip_area"); break; |
| 1507 | | case 14 : set_func("f_set_clt_element"); break; |
| 1508 | | case 15 : set_func("f_enquire_clt_element"); break; |
| 1509 | | case 16 : set_func("f_set_new_clt"); dump_dssi=&decode_dssi_f_set_new_clt; break; |
| 1510 | | case 17 : set_func("f_enquire_clt_contents"); break; |
| 1511 | | case 18 : set_func("f_define_dithering_pattern"); break; |
| 1512 | | case 19 : set_func("f_enquire_dithering_pattern"); break; |
| 1513 | | case 20 : set_func("f_draw_sprite"); break; |
| 1514 | | case 21 : set_func("f_move_sprite"); break; |
| 1515 | | case 22 : set_func("f_erase_sprite"); break; |
| 1516 | | case 23 : set_func("f_read_pixel"); break; |
| 1517 | | case 24 : set_func("f_read_to_limit"); break; |
| 1518 | | case 25 : set_func("f_read_area_pixel"); break; |
| 1519 | | case 26 : set_func("f_write_area_pixel"); break; |
| 1520 | | case 27 : set_func("f_copy_area_pixel"); break; |
| 1521 | | |
| 1522 | | case 29 : set_func("f_read_area_word"); break; |
| 1523 | | case 30 : set_func("f_write_area_word"); break; |
| 1524 | | case 31 : set_func("f_copy_area_word"); break; |
| 1525 | | case 32 : set_func("f_swap_area_word"); break; |
| 1526 | | case 33 : set_func("f_set_border_colour"); break; |
| 1527 | | case 34 : set_func("f_enquire_border_colour"); break; |
| 1528 | | case 35 : set_func("f_enquire_miscellaneous_data"); break; |
| 1529 | | case 36 : set_func("f_circle"); break; |
| 1530 | | |
| 1531 | | case 38 : set_func("f_arc_of_ellipse"); break; |
| 1532 | | case 39 : set_func("f_isin"); break; |
| 1533 | | case 40 : set_func("f_icos"); break; |
| 1534 | | case 41 : set_func("f_define_hatching_pattern"); break; |
| 1535 | | case 42 : set_func("f_enquire_hatching_pattern"); break; |
| 1536 | | case 43 : set_func("f_enquire_display_line"); break; |
| 1537 | | case 44 : set_func("f_plonk_logo"); break; |
| 1538 | | } |
| 1539 | | }; break; |
| 1540 | | |
| 1541 | | case 7 : |
| 1542 | | { |
| 1543 | | set_type("t_zend"); |
| 1544 | | switch(ax) |
| 1545 | | { |
| 1546 | | case 0 : set_func("f_get_version_number"); break; |
| 1547 | | } |
| 1548 | | }; break; |
| 1549 | | |
| 1550 | | case 8 : |
| 1551 | | { |
| 1552 | | set_type("t_zep"); |
| 1553 | | switch(ax) |
| 1554 | | { |
| 1555 | | case 0 : set_func("f_get_version_number"); break; |
| 1556 | | } |
| 1557 | | }; break; |
| 1558 | | |
| 1559 | | case 9 : |
| 1560 | | { |
| 1561 | | set_type("t_raw_console"); |
| 1562 | | |
| 1563 | | switch(bx) |
| 1564 | | { |
| 1565 | | case 0 : |
| 1566 | | { |
| 1567 | | set_drv("d_screen"); |
| 1568 | | |
| 1569 | | switch(ax) |
| 1570 | | { |
| 1571 | | case 0 : set_func("f_get_version_number"); break; |
| 1572 | | case 1 : set_func("f_plonk_char"); break; |
| 1573 | | case 2 : set_func("f_plonk_cursor"); break; |
| 1574 | | case 3 : set_func("f_kill_cursor"); break; |
| 1575 | | case 4 : set_func("f_scroll"); break; |
| 1576 | | case 5 : set_func("f_width"); break; |
| 1577 | | case 6 : set_func("f_get_char_set"); break; |
| 1578 | | case 7 : set_func("f_set_char_set"); break; |
| 1579 | | case 8 : set_func("f_reset_char_set"); break; |
| 1580 | | case 9 : set_func("f_set_plonk_parameters"); break; |
| 1581 | | case 10 : set_func("f_set_cursor_flash_rate"); break; |
| 1582 | | } |
| 1583 | | }; break; |
| 1584 | | |
| 1585 | | case 1 : |
| 1586 | | { |
| 1587 | | set_drv("d_keyboard"); |
| 1588 | | |
| 1589 | | switch(ax) |
| 1590 | | { |
| 1591 | | case 0 : set_func("f_get_version_number"); break; |
| 1592 | | case 1 : set_func("f_init_keyboard"); break; |
| 1593 | | case 2 : set_func("f_get_last_key_code"); break; |
| 1594 | | case 3 : set_func("f_get_bitmap"); break; |
| 1595 | | } |
| 1596 | | }; break; |
| 1597 | | } |
| 1598 | | }; break; |
| 1599 | | |
| 1600 | | case 10 : |
| 1601 | | { |
| 1602 | | set_type("t_acoustics"); |
| 1603 | | switch(ax) |
| 1604 | | { |
| 1605 | | case 0 : set_func("f_get_version_number"); break; |
| 1606 | | } |
| 1607 | | }; break; |
| 1608 | | |
| 1609 | | case 11 : |
| 1610 | | { |
| 1611 | | set_type("t_hard_sums"); |
| 1612 | | switch(ax) |
| 1613 | | { |
| 1614 | | case 0 : set_func("f_get_version_number"); break; |
| 1615 | | } |
| 1616 | | }; break; |
| 1617 | | } |
| 1618 | | |
| 1619 | | logerror("Type=%s, Driver=%s, Function=%s\n",type_str,drv_str,func_str); |
| 1620 | | |
| 1621 | | if(dump_dssi!=NULL) |
| 1622 | | dump_dssi(device,ds,si); |
| 1623 | | logerror("=======================================================================\n"); |
| 1624 | | } |
| 1625 | | |
| 1626 | | void *get_dssi_ptr(const address_space *space, UINT16 ds, UINT16 si) |
| 1627 | | { |
| 1628 | | int addr; |
| 1629 | | |
| 1630 | | addr=((ds<<4)+si); |
| 1631 | | OUTPUT_SEGOFS("DS:SI",ds,si); |
| 1632 | | |
| 1633 | | return memory_get_read_ptr(space, addr); |
| 1634 | | } |
| 1635 | | |
| 1636 | | static void decode_dssi_f_fill_area(const device_config *device,UINT16 ds, UINT16 si) |
| 1637 | | { |
| 1638 | | const address_space *space = cputag_get_address_space(device->machine,MAINCPU_TAG, ADDRESS_SPACE_PROGRAM); |
| 1639 | | |
| 1640 | | UINT16 *addr_ptr; |
| 1641 | | t_area_params *area_params; |
| 1642 | | t_nimbus_brush *brush; |
| 1643 | | int cocount; |
| 1644 | | |
| 1645 | | area_params = get_dssi_ptr(space,ds,si); |
| 1646 | | |
| 1647 | | OUTPUT_SEGOFS("SegBrush:OfsBrush",area_params->seg_brush,area_params->ofs_brush); |
| 1648 | | brush=memory_get_read_ptr(space, LINEAR_ADDR(area_params->seg_brush,area_params->ofs_brush)); |
| 1649 | | |
| 1650 | | logerror("Brush params\n"); |
| 1651 | | logerror("Style=%04X, StyleIndex=%04X\n",brush->style,brush->style_index); |
| 1652 | | logerror("Colour1=%04X, Colour2=%04X\n",brush->colour1,brush->colour2); |
| 1653 | | logerror("transparency=%04X, boundry_spec=%04X\n",brush->transparency,brush->boundary_spec); |
| 1654 | | logerror("boundry colour=%04X, save colour=%04X\n",brush->boundary_colour,brush->save_colour); |
| 1655 | | |
| 1656 | | |
| 1657 | | OUTPUT_SEGOFS("SegData:OfsData",area_params->seg_data,area_params->ofs_data); |
| 1658 | | |
| 1659 | | addr_ptr = memory_get_read_ptr(space, LINEAR_ADDR(area_params->seg_data,area_params->ofs_data)); |
| 1660 | | for(cocount=0; cocount < area_params->count; cocount++) |
| 1661 | | { |
| 1662 | | logerror("x=%d y=%d\n",addr_ptr[cocount*2],addr_ptr[(cocount*2)+1]); |
| 1663 | | } |
| 1664 | | } |
| 1665 | | |
| 1666 | | static void decode_dssi_f_plot_character_string(const device_config *device,UINT16 ds, UINT16 si) |
| 1667 | | { |
| 1668 | | const address_space *space = cputag_get_address_space(device->machine,MAINCPU_TAG, ADDRESS_SPACE_PROGRAM); |
| 1669 | | |
| 1670 | | UINT8 *char_ptr; |
| 1671 | | t_plot_string_params *plot_string_params; |
| 1672 | | int charno; |
| 1673 | | |
| 1674 | | plot_string_params=get_dssi_ptr(space,ds,si); |
| 1675 | | |
| 1676 | | OUTPUT_SEGOFS("SegFont:OfsFont",plot_string_params->seg_font,plot_string_params->ofs_font); |
| 1677 | | OUTPUT_SEGOFS("SegData:OfsData",plot_string_params->seg_data,plot_string_params->ofs_data); |
| 1678 | | |
| 1679 | | logerror("x=%d, y=%d, length=%d\n",plot_string_params->x,plot_string_params->y,plot_string_params->length); |
| 1680 | | |
| 1681 | | char_ptr=memory_get_read_ptr(space, LINEAR_ADDR(plot_string_params->seg_data,plot_string_params->ofs_data)); |
| 1682 | | |
| 1683 | | if (plot_string_params->length==0xFFFF) |
| 1684 | | logerror("%s",char_ptr); |
| 1685 | | else |
| 1686 | | for(charno=0;charno<plot_string_params->length;charno++) |
| 1687 | | logerror("%c",char_ptr[charno]); |
| 1688 | | |
| 1689 | | logerror("\n"); |
| 1690 | | } |
| 1691 | | |
| 1692 | | static void decode_dssi_f_set_new_clt(const device_config *device,UINT16 ds, UINT16 si) |
| 1693 | | { |
| 1694 | | const address_space *space = cputag_get_address_space(device->machine,MAINCPU_TAG, ADDRESS_SPACE_PROGRAM); |
| 1695 | | UINT16 *new_colours; |
| 1696 | | int colour; |
| 1697 | | new_colours=get_dssi_ptr(space,ds,si); |
| 1698 | | |
| 1699 | | OUTPUT_SEGOFS("SegColours:OfsColours",ds,si); |
| 1700 | | |
| 1701 | | for(colour=0;colour<16;colour++) |
| 1702 | | logerror("colour #%02X=%04X\n",colour,new_colours[colour]); |
| 1703 | | |
| 1704 | | } |
| 1705 | | |
| 1706 | | READ16_HANDLER( nimbus_io_r ) |
| 1707 | | { |
| 1708 | | int pc=cpu_get_pc(space->cpu); |
| 1709 | | |
| 1710 | | logerror("Nimbus IOR at pc=%08X from %04X mask=%04X, data=%04X\n",pc,(offset*2)+0x30,mem_mask,IOPorts[offset]); |
| 1711 | | |
| 1712 | | switch (offset*2) |
| 1713 | | { |
| 1714 | | default : return IOPorts[offset]; break; |
| 1715 | | } |
| 1716 | | return 0; |
| 1717 | | } |
| 1718 | | |
| 1719 | | WRITE16_HANDLER( nimbus_io_w ) |
| 1720 | | { |
| 1721 | | int pc=cpu_get_pc(space->cpu); |
| 1722 | | |
| 1723 | | logerror("Nimbus IOW at %08X write of %04X to %04X mask=%04X\n",pc,data,(offset*2)+0x30,mem_mask); |
| 1724 | | |
| 1725 | | switch (offset*2) |
| 1726 | | { |
| 1727 | | default : COMBINE_DATA(&IOPorts[offset]); break; |
| 1728 | | } |
| 1729 | | } |
| 1730 | | |
| 1731 | | |
| 1732 | | /* |
| 1733 | | Keyboard emulation |
| 1734 | | |
| 1735 | | */ |
| 1736 | | |
| 1737 | | static void keyboard_reset(void) |
| 1738 | | { |
| 1739 | | memset(keyboard.keyrows,0xFF,NIMBUS_KEYROWS); |
| 1740 | | |
| 1741 | | // Setup timer to scan keyboard. |
| 1742 | | timer_adjust_periodic(keyboard.keyscan_timer, attotime_zero, 0, ATTOTIME_IN_HZ(50)); |
| 1743 | | |
| 1744 | | } |
| 1745 | | |
| 1746 | | static void queue_scancode(UINT8 scancode) |
| 1747 | | { |
| 1748 | | keyboard.queue[keyboard.head] = scancode; |
| 1749 | | keyboard.head++; |
| 1750 | | keyboard.head %= ARRAY_LENGTH(keyboard.queue); |
| 1751 | | } |
| 1752 | | |
| 1753 | | static int keyboard_queue_read(void) |
| 1754 | | { |
| 1755 | | int data; |
| 1756 | | if (keyboard.tail == keyboard.head) |
| 1757 | | return -1; |
| 1758 | | |
| 1759 | | data = keyboard.queue[keyboard.tail]; |
| 1760 | | |
| 1761 | | if (LOG_KEYBOARD) |
| 1762 | | logerror("at_keyboard_read(): Keyboard Read 0x%02x\n",data); |
| 1763 | | |
| 1764 | | keyboard.tail++; |
| 1765 | | keyboard.tail %= ARRAY_LENGTH(keyboard.queue); |
| 1766 | | return data; |
| 1767 | | } |
| 1768 | | |
| 1769 | | static TIMER_CALLBACK(keyscan_callback) |
| 1770 | | { |
| 1771 | | UINT8 keyrow; |
| 1772 | | UINT8 row; |
| 1773 | | UINT8 bitno; |
| 1774 | | UINT8 mask; |
| 1775 | | static const char *const keynames[] = { "KEY0", "KEY1", "KEY2", "KEY3", "KEY4", |
| 1776 | | "KEY5", "KEY6", "KEY7", "KEY8", "KEY9", |
| 1777 | | "KEY10"}; |
| 1778 | | |
| 1779 | | for(row=0;row<NIMBUS_KEYROWS;row++) |
| 1780 | | { |
| 1781 | | keyrow=input_port_read(machine, keynames[row]); |
| 1782 | | |
| 1783 | | for(mask=0x80, bitno=7;mask>0;mask=mask>>1, bitno-=1) |
| 1784 | | { |
| 1785 | | if(!(keyrow & mask) && (keyboard.keyrows[row] & mask)) |
| 1786 | | { |
| 1787 | | logerror("keypress %02X\n",(row<<3)+bitno); |
| 1788 | | queue_scancode((row<<3)+bitno); |
| 1789 | | } |
| 1790 | | |
| 1791 | | if((keyrow & mask) && !(keyboard.keyrows[row] & mask)) |
| 1792 | | { |
| 1793 | | logerror("keyrelease %02X\n",0x80+(row<<3)+bitno); |
| 1794 | | queue_scancode(0x80+(row<<3)+bitno); |
| 1795 | | } |
| 1796 | | } |
| 1797 | | |
| 1798 | | keyboard.keyrows[row]=keyrow; |
| 1799 | | } |
| 1800 | | } |
| 1801 | | |
| 1802 | | |
| 1803 | | /* |
| 1804 | | |
| 1805 | | Z80SIO, used for the keyboard interface |
| 1806 | | |
| 1807 | | */ |
| 1808 | | |
| 1809 | | READ8_DEVICE_HANDLER( sio_r ) |
| 1810 | | { |
| 1811 | | int pc=cpu_get_pc(cputag_get_cpu(device->machine,MAINCPU_TAG)); |
| 1812 | | UINT8 result = 0; |
| 1813 | | |
| 1814 | | switch (offset*2) |
| 1815 | | { |
| 1816 | | case 0 : |
| 1817 | | result=z80sio_d_r(device, 0); |
| 1818 | | break; |
| 1819 | | case 2 : |
| 1820 | | result=z80sio_d_r(device, 1); |
| 1821 | | break; |
| 1822 | | case 4 : |
| 1823 | | result=z80sio_c_r(device, 0); |
| 1824 | | break; |
| 1825 | | case 6 : |
| 1826 | | result=z80sio_c_r(device, 1); |
| 1827 | | break; |
| 1828 | | } |
| 1829 | | |
| 1830 | | logerror("Nimbus SIOR at pc=%08X from %04X data=%02X\n",pc,(offset*2)+0xF0,result); |
| 1831 | | |
| 1832 | | return result; |
| 1833 | | } |
| 1834 | | |
| 1835 | | WRITE8_DEVICE_HANDLER( sio_w ) |
| 1836 | | { |
| 1837 | | int pc=cpu_get_pc(cputag_get_cpu(device->machine,MAINCPU_TAG)); |
| 1838 | | |
| 1839 | | logerror("Nimbus SIOW at %08X write of %02X to %04X\n",pc,data,(offset*2)+0xF0); |
| 1840 | | |
| 1841 | | switch (offset*2) |
| 1842 | | { |
| 1843 | | case 0 : |
| 1844 | | z80sio_d_w(device, 0, data); |
| 1845 | | break; |
| 1846 | | case 2 : |
| 1847 | | z80sio_d_w(device, 1, data); |
| 1848 | | break; |
| 1849 | | case 4 : |
| 1850 | | z80sio_c_w(device, 0, data); |
| 1851 | | break; |
| 1852 | | case 5 : |
| 1853 | | z80sio_c_w(device, 1, data); |
| 1854 | | break; |
| 1855 | | } |
| 1856 | | } |
| 1857 | | |
| 1858 | | /* Z80 SIO/2 */ |
| 1859 | | |
| 1860 | | void sio_interrupt(const device_config *device, int state) |
| 1861 | | { |
| 1862 | | logerror("SIO Interrupt state=%02X\n",state); |
| 1863 | | |
| 1864 | | // Don't re-trigger if already active ! |
| 1865 | | if(state!=sio_int_state) |
| 1866 | | { |
| 1867 | | sio_int_state=state; |
| 1868 | | |
| 1869 | | if(state) |
| 1870 | | external_int(device->machine,0,0x9C); |
| 1871 | | } |
| 1872 | | } |
| 1873 | | |
| 1874 | | WRITE8_DEVICE_HANDLER( sio_dtr_w ) |
| 1875 | | { |
| 1876 | | if (offset == 1) |
| 1877 | | { |
| 1878 | | } |
| 1879 | | } |
| 1880 | | |
| 1881 | | WRITE8_DEVICE_HANDLER( sio_serial_transmit ) |
| 1882 | | { |
| 1883 | | } |
| 1884 | | |
| 1885 | | int sio_serial_receive( const device_config *device, int channel ) |
| 1886 | | { |
| 1887 | | if(channel==0) |
| 1888 | | { |
| 1889 | | return keyboard_queue_read(); |
| 1890 | | } |
| 1891 | | else |
| 1892 | | return -1; |
| 1893 | | } |
| 1894 | | |
| 1895 | | /* Floppy disk */ |
| 1896 | | |
| 1897 | | static void fdc_reset(void) |
| 1898 | | { |
| 1899 | | nimbus_fdc.irq_enabled=0; |
| 1900 | | nimbus_fdc.drq_enabled=0; |
| 1901 | | nimbus_fdc.diskno=0; |
| 1902 | | nimbus_fdc.motor_on=0; |
| 1903 | | } |
| 1904 | | |
| 1905 | | static WRITE_LINE_DEVICE_HANDLER( nimbus_fdc_intrq_w ) |
| 1906 | | { |
| 1907 | | logerror("nimbus_fdc_intrq_w(%d)\n", state); |
| 1908 | | |
| 1909 | | if(state && nimbus_fdc.irq_enabled) |
| 1910 | | { |
| 1911 | | external_int(device->machine,0,0x80); |
| 1912 | | } |
| 1913 | | } |
| 1914 | | |
| 1915 | | static WRITE_LINE_DEVICE_HANDLER( nimbus_fdc_drq_w ) |
| 1916 | | { |
| 1917 | | logerror("nimbus_fdc_drq_w(%d)\n", state); |
| 1918 | | |
| 1919 | | if(state && nimbus_fdc.drq_enabled) |
| 1920 | | drq_callback(device->machine,1); |
| 1921 | | } |
| 1922 | | |
| 1923 | | READ8_HANDLER( nimbus_fdc_r ) |
| 1924 | | { |
| 1925 | | int result = 0; |
| 1926 | | const device_config *fdc = devtag_get_device(space->machine, FDC_TAG); |
| 1927 | | int pc=cpu_get_pc(space->cpu); |
| 1928 | | const device_config *drive = devtag_get_device(space->machine, nimbus_wd17xx_interface.floppy_drive_tags[nimbus_fdc.diskno]); |
| 1929 | | |
| 1930 | | switch(offset*2) |
| 1931 | | { |
| 1932 | | case 0x08 : |
| 1933 | | result = wd17xx_status_r(fdc, 0); |
| 1934 | | logerror("Disk status=%2.2X\n",result); |
| 1935 | | break; |
| 1936 | | case 0x0A : |
| 1937 | | result = wd17xx_track_r(fdc, 0); |
| 1938 | | break; |
| 1939 | | case 0x0C : |
| 1940 | | result = wd17xx_sector_r(fdc, 0); |
| 1941 | | break; |
| 1942 | | case 0x0E : |
| 1943 | | result = wd17xx_data_r(fdc, 0); |
| 1944 | | break; |
| 1945 | | case 0x10 : |
| 1946 | | result = (nimbus_fdc.motor_on ? 0x04 : 0x00) | |
| 1947 | | (floppy_drive_get_flag_state(drive, FLOPPY_DRIVE_INDEX) ? 0x00 : 0x02) | |
| 1948 | | (floppy_drive_get_flag_state(drive, FLOPPY_DRIVE_READY) ? 0x01 : 0x00); |
| 1949 | | break; |
| 1950 | | default: |
| 1951 | | break; |
| 1952 | | } |
| 1953 | | |
| 1954 | | logerror("Nimbus FDCR at pc=%08X from %04X data=%02X\n",pc,(offset*2)+0x400,result); |
| 1955 | | |
| 1956 | | return result; |
| 1957 | | } |
| 1958 | | |
| 1959 | | WRITE8_HANDLER( nimbus_fdc_w ) |
| 1960 | | { |
| 1961 | | const device_config *fdc = devtag_get_device(space->machine, FDC_TAG); |
| 1962 | | int pc=cpu_get_pc(space->cpu); |
| 1963 | | |
| 1964 | | logerror("Nimbus FDCW at %08X write of %02X to %04X\n",pc,data,(offset*2)+0x400); |
| 1965 | | |
| 1966 | | switch(offset*2) |
| 1967 | | { |
| 1968 | | case 0x00 : |
| 1969 | | switch (data & 0x0F) |
| 1970 | | { |
| 1971 | | case 0x01 : nimbus_fdc.diskno=0; break; |
| 1972 | | case 0x02 : nimbus_fdc.diskno=1; break; |
| 1973 | | case 0x04 : nimbus_fdc.diskno=2; break; |
| 1974 | | case 0x08 : nimbus_fdc.diskno=3; break; |
| 1975 | | //default : nimbus_fdc.diskno=NO_DRIVE_SELECTED; break; // no drive selected |
| 1976 | | } |
| 1977 | | if (nimbus_fdc.diskno!=NO_DRIVE_SELECTED) |
| 1978 | | { |
| 1979 | | wd17xx_set_drive(fdc, nimbus_fdc.diskno); |
| 1980 | | wd17xx_set_side(fdc, (data & 0x10) ? 1 : 0); |
| 1981 | | } |
| 1982 | | nimbus_fdc.motor_on=(data & 0x20); |
| 1983 | | nimbus_fdc.drq_enabled=(data & 0x80); |
| 1984 | | nimbus_fdc.irq_enabled=1; |
| 1985 | | |
| 1986 | | // Nimbus FDC is hard wired for double density |
| 1987 | | wd17xx_set_density(fdc, DEN_MFM_LO); |
| 1988 | | break; |
| 1989 | | case 0x08 : |
| 1990 | | wd17xx_command_w(fdc, 0, data); |
| 1991 | | break; |
| 1992 | | case 0x0A : |
| 1993 | | wd17xx_track_w(fdc, 0, data); |
| 1994 | | break; |
| 1995 | | case 0x0C : |
| 1996 | | wd17xx_sector_w(fdc, 0, data); |
| 1997 | | break; |
| 1998 | | case 0x0E : |
| 1999 | | wd17xx_data_w(fdc, 0, data); |
| 2000 | | break; |
| 2001 | | } |
| 2002 | | } |
| 2003 | | |
| 1 | /* |
| 2 | machine/rmnimbus.c
|
| 3 | |
| 4 | Machine driver for the Research Machines Nimbus.
|
| 5 | |
| 6 | Phill Harvey-Smith
|
| 7 | 2009-11-29.
|
| 8 | |
| 9 | 80186 internal DMA/Timer/PIC code borrowed from Compis driver.
|
| 10 | Perhaps this needs merging into the 80186 core.....
|
| 11 | */
|
| 12 | |
| 13 | |
| 14 | #include "driver.h"
|
| 15 | #include "memory.h"
|
| 16 | #include "cpu/i86/i86.h"
|
| 17 | #include "debug/debugcpu.h"
|
| 18 | #include "debug/debugcon.h"
|
| 19 | #include "devices/flopdrv.h"
|
| 20 | #include "machine/pic8259.h"
|
| 21 | #include "machine/pit8253.h"
|
| 22 | #include "machine/msm8251.h"
|
| 23 | #include "machine/z80sio.h"
|
| 24 | |
| 25 | #include "includes/rmnimbus.h"
|
| 26 | |
| 27 | /*-------------------------------------------------------------------------*/
|
| 28 | /* Defines, constants, and global variables */
|
| 29 | /*-------------------------------------------------------------------------*/
|
| 30 | |
| 31 | /* CPU 80186 */
|
| 32 | #define LATCH_INTS 1
|
| 33 | #define LOG_PORTS 0
|
| 34 | #define LOG_INTERRUPTS 0
|
| 35 | #define LOG_INTERRUPTS_EXT 0
|
| 36 | #define LOG_TIMER 0
|
| 37 | #define LOG_OPTIMIZATION 0
|
| 38 | #define LOG_DMA 0
|
| 39 | #define CPU_RESUME_TRIGGER 7123
|
| 40 | #define LOG_KEYBOARD 0
|
| 41 | #define LOG_SIO 0
|
| 42 | #define LOG_DISK 0
|
| 43 | |
| 44 | /* 80186 internal stuff */
|
| 45 | struct mem_state
|
| 46 | {
|
| 47 | UINT16 lower;
|
| 48 | UINT16 upper;
|
| 49 | UINT16 middle;
|
| 50 | UINT16 middle_size;
|
| 51 | UINT16 peripheral;
|
| 52 | };
|
| 53 | |
| 54 | struct timer_state
|
| 55 | {
|
| 56 | UINT16 control;
|
| 57 | UINT16 maxA;
|
| 58 | UINT16 maxB;
|
| 59 | UINT16 count;
|
| 60 | emu_timer *int_timer;
|
| 61 | emu_timer *time_timer;
|
| 62 | UINT8 time_timer_active;
|
| 63 | attotime last_time;
|
| 64 | };
|
| 65 | |
| 66 | struct dma_state
|
| 67 | {
|
| 68 | UINT32 source;
|
| 69 | UINT32 dest;
|
| 70 | UINT16 count;
|
| 71 | UINT16 control;
|
| 72 | UINT8 finished;
|
| 73 | emu_timer *finish_timer;
|
| 74 | };
|
| 75 | |
| 76 | struct intr_state
|
| 77 | {
|
| 78 | UINT8 pending;
|
| 79 | UINT16 ack_mask;
|
| 80 | UINT16 priority_mask;
|
| 81 | UINT16 in_service;
|
| 82 | UINT16 request;
|
| 83 | UINT16 status;
|
| 84 | UINT16 poll_status;
|
| 85 | UINT16 timer;
|
| 86 | UINT16 dma[2];
|
| 87 | UINT16 ext[4];
|
| 88 | UINT16 ext_vector[2]; // external vectors, when in cascade mode
|
| 89 | };
|
| 90 | |
| 91 | static struct i186_state
|
| 92 | {
|
| 93 | struct timer_state timer[3];
|
| 94 | struct dma_state dma[2];
|
| 95 | struct intr_state intr;
|
| 96 | struct mem_state mem;
|
| 97 | } i186;
|
| 98 | |
| 99 | |
| 100 | /* Z80 SIO */
|
| 101 | |
| 102 | const z80sio_interface sio_intf =
|
| 103 | {
|
| 104 | sio_interrupt, /* interrupt handler */
|
| 105 | 0, //sio_dtr_w, /* DTR changed handler */
|
| 106 | 0, /* RTS changed handler */
|
| 107 | 0, /* BREAK changed handler */
|
| 108 | sio_serial_transmit, /* transmit handler */
|
| 109 | sio_serial_receive /* receive handler */
|
| 110 | };
|
| 111 | |
| 112 | struct keybord_state
|
| 113 | {
|
| 114 | UINT8 keyrows[NIMBUS_KEYROWS];
|
| 115 | emu_timer *keyscan_timer;
|
| 116 | UINT8 queue[KEYBOARD_QUEUE_SIZE];
|
| 117 | UINT8 head;
|
| 118 | UINT8 tail;
|
| 119 | } keyboard;
|
| 120 | |
| 121 | |
| 122 | |
| 123 | /* Floppy drives WD2793 */
|
| 124 | |
| 125 | static WRITE_LINE_DEVICE_HANDLER( nimbus_fdc_intrq_w );
|
| 126 | static WRITE_LINE_DEVICE_HANDLER( nimbus_fdc_drq_w );
|
| 127 | |
| 128 | const wd17xx_interface nimbus_wd17xx_interface =
|
| 129 | {
|
| 130 | DEVCB_LINE(nimbus_fdc_intrq_w),
|
| 131 | DEVCB_LINE(nimbus_fdc_drq_w),
|
| 132 | {FLOPPY_0, FLOPPY_1, FLOPPY_2, FLOPPY_3}
|
| 133 | };
|
| 134 | |
| 135 | static struct _nimbus_fdc
|
| 136 | {
|
| 137 | UINT8 drq_enabled;
|
| 138 | UINT8 irq_enabled;
|
| 139 | UINT8 diskno;
|
| 140 | UINT8 motor_on;
|
| 141 | } nimbus_fdc;
|
| 142 | |
| 143 | |
| 144 | static void drq_callback(running_machine *machine, int which);
|
| 145 | |
| 146 | static void execute_debug_irq(running_machine *machine, int ref, int params, const char *param[]);
|
| 147 | static void execute_debug_intmasks(running_machine *machine, int ref, int params, const char *param[]);
|
| 148 | |
| 149 | static int instruction_hook(const device_config *device, offs_t curpc);
|
| 150 | static void decode_subbios(const device_config *device,offs_t pc);
|
| 151 | static void decode_dssi_f_fill_area(const device_config *device,UINT16 ds, UINT16 si);
|
| 152 | static void decode_dssi_f_plot_character_string(const device_config *device,UINT16 ds, UINT16 si);
|
| 153 | static void decode_dssi_f_set_new_clt(const device_config *device,UINT16 ds, UINT16 si);
|
| 154 | static void decode_dssi_f_plonk_char(const device_config *device,UINT16 ds, UINT16 si);
|
| 155 | |
| 156 | static void fdc_reset(void);
|
| 157 | |
| 158 | static void keyboard_reset(void);
|
| 159 | static TIMER_CALLBACK(keyscan_callback);
|
| 160 | |
| 161 | #define num_ioports 0x80
|
| 162 | static UINT16 IOPorts[num_ioports];
|
| 163 | |
| 164 | UINT8 nextkey;
|
| 165 | UINT8 sio_int_state;
|
| 166 | |
| 167 | /*************************************
|
| 168 | *
|
| 169 | * 80186 interrupt controller
|
| 170 | *
|
| 171 | *************************************/
|
| 172 | static IRQ_CALLBACK(int_callback)
|
| 173 | {
|
| 174 | UINT8 vector;
|
| 175 | UINT16 old;
|
| 176 | UINT16 oldreq;
|
| 177 | |
| 178 | if (LOG_INTERRUPTS)
|
| 179 | logerror("(%f) **** Acknowledged interrupt vector %02X\n", attotime_to_double(timer_get_time(device->machine)), i186.intr.poll_status & 0x1f);
|
| 180 | |
| 181 | /* clear the interrupt */
|
| 182 | cpu_set_input_line(device, 0, CLEAR_LINE);
|
| 183 | i186.intr.pending = 0;
|
| 184 | |
| 185 | oldreq=i186.intr.request;
|
| 186 | |
| 187 | /* clear the request and set the in-service bit */
|
| 188 | #if LATCH_INTS
|
| 189 | i186.intr.request &= ~i186.intr.ack_mask;
|
| 190 | #else
|
| 191 | i186.intr.request &= ~(i186.intr.ack_mask & 0x0f);
|
| 192 | #endif
|
| 193 | |
| 194 | if((LOG_INTERRUPTS) && (i186.intr.request!=oldreq))
|
| 195 | logerror("i186.intr.request changed from %02X to %02X\n",oldreq,i186.intr.request);
|
| 196 | |
| 197 | old=i186.intr.in_service;
|
| 198 | |
| 199 | i186.intr.in_service |= i186.intr.ack_mask;
|
| 200 |
|
| 201 | if((LOG_INTERRUPTS) && (i186.intr.in_service!=old))
|
| 202 | logerror("i186.intr.in_service changed from %02X to %02X\n",old,i186.intr.in_service);
|
| 203 | |
| 204 | if (i186.intr.ack_mask == 0x0001)
|
| 205 | {
|
| 206 | switch (i186.intr.poll_status & 0x1f)
|
| 207 | {
|
| 208 | case 0x08: i186.intr.status &= ~0x01; break;
|
| 209 | case 0x12: i186.intr.status &= ~0x02; break;
|
| 210 | case 0x13: i186.intr.status &= ~0x04; break;
|
| 211 | }
|
| 212 | }
|
| 213 | i186.intr.ack_mask = 0;
|
| 214 | |
| 215 | /* a request no longer pending */
|
| 216 | i186.intr.poll_status &= ~0x8000;
|
| 217 | |
| 218 | /* return the vector */
|
| 219 | switch(i186.intr.poll_status & 0x1F)
|
| 220 | {
|
| 221 | case 0x0C : vector=(i186.intr.ext[0] & EXTINT_CTRL_CASCADE) ? i186.intr.ext_vector[0] : (i186.intr.poll_status & 0x1f); break;
|
| 222 | case 0x0D : vector=(i186.intr.ext[1] & EXTINT_CTRL_CASCADE) ? i186.intr.ext_vector[1] : (i186.intr.poll_status & 0x1f); break;
|
| 223 | default :
|
| 224 | vector=i186.intr.poll_status & 0x1f; break;
|
| 225 | }
|
| 226 | |
| 227 | if (LOG_INTERRUPTS_EXT)
|
| 228 | {
|
| 229 | logerror("i186.intr.ext[0]=%04X i186.intr.ext[1]=%04X\n",i186.intr.ext[0],i186.intr.ext[1]);
|
| 230 | logerror("Ext vectors : %02X %02X\n",i186.intr.ext_vector[0],i186.intr.ext_vector[1]);
|
| 231 | logerror("Int %02X Calling vector %02X\n",i186.intr.poll_status,vector);
|
| 232 | }
|
| 233 | |
| 234 | return vector;
|
| 235 | }
|
| 236 | |
| 237 | |
| 238 | static void update_interrupt_state(running_machine *machine)
|
| 239 | {
|
| 240 | int new_vector = 0;
|
| 241 | int Priority;
|
| 242 | int IntNo;
|
| 243 | |
| 244 | if (LOG_INTERRUPTS) |
| 245 | logerror("update_interrupt_status: req=%04X stat=%04X serv=%04X priority_mask=%4X\n", i186.intr.request, i186.intr.status, i186.intr.in_service, i186.intr.priority_mask);
|
| 246 | |
| 247 | /* loop over priorities */
|
| 248 | for (Priority = 0; Priority <= i186.intr.priority_mask; Priority++)
|
| 249 | {
|
| 250 | /* note: by checking 4 bits, we also verify that the mask is off */
|
| 251 | if ((i186.intr.timer & 15) == Priority)
|
| 252 | {
|
| 253 | /* if we're already servicing something at this level, don't generate anything new */
|
| 254 | if (i186.intr.in_service & 0x01)
|
| 255 | return;
|
| 256 | |
| 257 | /* if there's something pending, generate an interrupt */
|
| 258 | if (i186.intr.status & 0x07)
|
| 259 | {
|
| 260 | if (i186.intr.status & 1)
|
| 261 | new_vector = 0x08;
|
| 262 | else if (i186.intr.status & 2)
|
| 263 | new_vector = 0x12;
|
| 264 | else if (i186.intr.status & 4)
|
| 265 | new_vector = 0x13;
|
| 266 | else
|
| 267 | popmessage("Invalid timer interrupt!");
|
| 268 | |
| 269 | /* set the clear mask and generate the int */
|
| 270 | i186.intr.ack_mask = 0x0001;
|
| 271 | goto generate_int;
|
| 272 | }
|
| 273 | }
|
| 274 | |
| 275 | /* check DMA interrupts */
|
| 276 | for (IntNo = 0; IntNo < 2; IntNo++)
|
| 277 | if ((i186.intr.dma[IntNo] & 0x0F) == Priority)
|
| 278 | {
|
| 279 | /* if we're already servicing something at this level, don't generate anything new */
|
| 280 | if (i186.intr.in_service & (0x04 << IntNo))
|
| 281 | return;
|
| 282 | |
| 283 | /* if there's something pending, generate an interrupt */
|
| 284 | if (i186.intr.request & (0x04 << IntNo))
|
| 285 | {
|
| 286 | new_vector = 0x0a + IntNo;
|
| 287 | |
| 288 | /* set the clear mask and generate the int */
|
| 289 | i186.intr.ack_mask = 0x0004 << IntNo;
|
| 290 | goto generate_int;
|
| 291 | }
|
| 292 | }
|
| 293 | |
| 294 | //logerror("Checking external ints\n");
|
| 295 | /* check external interrupts */
|
| 296 | for (IntNo = 0; IntNo < 4; IntNo++)
|
| 297 | if ((i186.intr.ext[IntNo] & 0x0F) == Priority)
|
| 298 | {
|
| 299 | if (LOG_INTERRUPTS)
|
| 300 | logerror("Int%d priority=%d\n",IntNo,Priority);
|
| 301 | |
| 302 | /* if we're already servicing something at this level, don't generate anything new */
|
| 303 | if (i186.intr.in_service & (0x10 << IntNo))
|
| 304 | return;
|
| 305 | |
| 306 | /* if there's something pending, generate an interrupt */
|
| 307 | if (i186.intr.request & (0x10 << IntNo))
|
| 308 | {
|
| 309 | /* otherwise, generate an interrupt for this request */
|
| 310 | new_vector = 0x0c + IntNo;
|
| 311 | |
| 312 | /* set the clear mask and generate the int */
|
| 313 | i186.intr.ack_mask = 0x0010 << IntNo;
|
| 314 | goto generate_int;
|
| 315 | }
|
| 316 | }
|
| 317 | }
|
| 318 | return;
|
| 319 | |
| 320 | generate_int:
|
| 321 | /* generate the appropriate interrupt */
|
| 322 | i186.intr.poll_status = 0x8000 | new_vector;
|
| 323 | if (!i186.intr.pending)
|
| 324 | cputag_set_input_line(machine, MAINCPU_TAG, 0, ASSERT_LINE);
|
| 325 | i186.intr.pending = 1;
|
| 326 | cpuexec_trigger(machine, CPU_RESUME_TRIGGER);
|
| 327 | if (LOG_OPTIMIZATION) logerror(" - trigger due to interrupt pending\n");
|
| 328 | if (LOG_INTERRUPTS) logerror("(%f) **** Requesting interrupt vector %02X\n", attotime_to_double(timer_get_time(machine)), new_vector);
|
| 329 | }
|
| 330 | |
| 331 | |
| 332 | static void handle_eoi(running_machine *machine,int data)
|
| 333 | {
|
| 334 | int Priority;
|
| 335 | int IntNo;
|
| 336 | |
| 337 | /* specific case */
|
| 338 | if (!(data & 0x8000))
|
| 339 | {
|
| 340 | /* turn off the appropriate in-service bit */
|
| 341 | switch (data & 0x1f)
|
| 342 | {
|
| 343 | case 0x08: i186.intr.in_service &= ~0x01; break;
|
| 344 | case 0x12: i186.intr.in_service &= ~0x01; break;
|
| 345 | case 0x13: i186.intr.in_service &= ~0x01; break;
|
| 346 | case 0x0a: i186.intr.in_service &= ~0x04; break;
|
| 347 | case 0x0b: i186.intr.in_service &= ~0x08; break;
|
| 348 | case 0x0c: i186.intr.in_service &= ~0x10; break;
|
| 349 | case 0x0d: i186.intr.in_service &= ~0x20; break;
|
| 350 | case 0x0e: i186.intr.in_service &= ~0x40; break;
|
| 351 | case 0x0f: i186.intr.in_service &= ~0x80; break;
|
| 352 | default: logerror("%05X:ERROR - 80186 EOI with unknown vector %02X\n", cpu_get_pc(cputag_get_cpu(machine, MAINCPU_TAG)), data & 0x1f);
|
| 353 | }
|
| 354 | if (LOG_INTERRUPTS) logerror("(%f) **** Got EOI for vector %02X\n", attotime_to_double(timer_get_time(machine)), data & 0x1f);
|
| 355 | }
|
| 356 | |
| 357 | /* non-specific case */
|
| 358 | else
|
| 359 | {
|
| 360 | /* loop over priorities */
|
| 361 | for (Priority = 0; Priority <= 7; Priority++)
|
| 362 | {
|
| 363 | /* check for in-service timers */
|
| 364 | if ((i186.intr.timer & 0x07) == Priority && (i186.intr.in_service & 0x01))
|
| 365 | {
|
| 366 | i186.intr.in_service &= ~0x01;
|
| 367 | if (LOG_INTERRUPTS) logerror("(%f) **** Got EOI for timer\n", attotime_to_double(timer_get_time(machine)));
|
| 368 | return;
|
| 369 | }
|
| 370 | |
| 371 | /* check for in-service DMA interrupts */
|
| 372 | for (IntNo = 0; IntNo < 2; IntNo++)
|
| 373 | if ((i186.intr.dma[IntNo] & 0x07) == Priority && (i186.intr.in_service & (0x04 << IntNo)))
|
| 374 | {
|
| 375 | i186.intr.in_service &= ~(0x04 << IntNo);
|
| 376 | if (LOG_INTERRUPTS) logerror("(%f) **** Got EOI for DMA%d\n", attotime_to_double(timer_get_time(machine)), IntNo);
|
| 377 | return;
|
| 378 | }
|
| 379 | |
| 380 | /* check external interrupts */
|
| 381 | for (IntNo = 0; IntNo < 4; IntNo++)
|
| 382 | if ((i186.intr.ext[IntNo] & 0x07) == Priority && (i186.intr.in_service & (0x10 << IntNo)))
|
| 383 | {
|
| 384 | i186.intr.in_service &= ~(0x10 << IntNo);
|
| 385 | if (LOG_INTERRUPTS) logerror("(%f) **** Got EOI for INT%d\n", attotime_to_double(timer_get_time(machine)), IntNo);
|
| 386 | return;
|
| 387 | }
|
| 388 | }
|
| 389 | }
|
| 390 | }
|
| 391 | |
| 392 | /* Trigger an external interupt, optionally supplying the vector to take */
|
| 393 | static void external_int(running_machine *machine, UINT16 intno, UINT8 vector)
|
| 394 | {
|
| 395 | if (LOG_INTERRUPTS_EXT) logerror("generating external int %02X, vector %02X\n",intno,vector);
|
| 396 |
|
| 397 | // Only 4 external ints
|
| 398 | if(intno>3)
|
| 399 | {
|
| 400 | logerror("external_int() invalid external interupt no : 0x%02X (can only be 0..3)\n",intno);
|
| 401 | return;
|
| 402 | }
|
| 403 | |
| 404 | // Only set external vector if cascade mode enabled, only valid for
|
| 405 | // int 0 & int 1
|
| 406 | if (intno<2)
|
| 407 | {
|
| 408 | if(i186.intr.ext[intno] & EXTINT_CTRL_CASCADE)
|
| 409 | i186.intr.ext_vector[intno]=vector;
|
| 410 | }
|
| 411 | |
| 412 | // Turn on the requested request bit and handle interrupt
|
| 413 | i186.intr.request |= (0x010 << intno);
|
| 414 | update_interrupt_state(machine);
|
| 415 | }
|
| 416 | |
| 417 | |
| 418 | /*************************************
|
| 419 | *
|
| 420 | * 80186 internal timers
|
| 421 | *
|
| 422 | *************************************/
|
| 423 | |
| 424 | static TIMER_CALLBACK(internal_timer_int)
|
| 425 | {
|
| 426 | int which = param;
|
| 427 | struct timer_state *t = &i186.timer[which];
|
| 428 | |
| 429 | if (LOG_TIMER) logerror("Hit interrupt callback for timer %d\n", which);
|
| 430 | |
| 431 | /* set the max count bit */
|
| 432 | t->control |= 0x0020;
|
| 433 | |
| 434 | /* request an interrupt */
|
| 435 | if (t->control & 0x2000)
|
| 436 | {
|
| 437 | i186.intr.status |= 0x01 << which;
|
| 438 | update_interrupt_state(machine);
|
| 439 | if (LOG_TIMER) logerror(" Generating timer interrupt\n");
|
| 440 | }
|
| 441 | |
| 442 | /* if we're continuous, reset */
|
| 443 | if (t->control & 0x0001)
|
| 444 | {
|
| 445 | int count = t->maxA ? t->maxA : 0x10000;
|
| 446 | timer_adjust_oneshot(t->int_timer, attotime_mul(ATTOTIME_IN_HZ(2000000), count), which);
|
| 447 | if (LOG_TIMER) logerror(" Repriming interrupt\n");
|
| 448 | }
|
| 449 | else
|
| 450 | timer_adjust_oneshot(t->int_timer, attotime_never, which);
|
| 451 | }
|
| 452 | |
| 453 | |
| 454 | static void internal_timer_sync(int which)
|
| 455 | {
|
| 456 | struct timer_state *t = &i186.timer[which];
|
| 457 | |
| 458 | /* if we have a timing timer running, adjust the count */
|
| 459 | if (t->time_timer_active)
|
| 460 | {
|
| 461 | attotime current_time = timer_timeelapsed(t->time_timer);
|
| 462 | int net_clocks = attotime_mul(attotime_sub(current_time, t->last_time), 2000000).seconds;
|
| 463 | t->last_time = current_time;
|
| 464 | |
| 465 | /* set the max count bit if we passed the max */
|
| 466 | if ((int)t->count + net_clocks >= t->maxA)
|
| 467 | t->control |= 0x0020;
|
| 468 | |
| 469 | /* set the new count */
|
| 470 | if (t->maxA != 0)
|
| 471 | t->count = (t->count + net_clocks) % t->maxA;
|
| 472 | else
|
| 473 | t->count = t->count + net_clocks;
|
| 474 | }
|
| 475 | }
|
| 476 | |
| 477 | |
| 478 | static void internal_timer_update(running_machine *machine,
|
| 479 | int which,
|
| 480 | int new_count,
|
| 481 | int new_maxA,
|
| 482 | int new_maxB,
|
| 483 | int new_control)
|
| 484 | {
|
| 485 | struct timer_state *t = &i186.timer[which];
|
| 486 | int update_int_timer = 0;
|
| 487 | |
| 488 | if (LOG_TIMER) |
| 489 | logerror("internal_timer_update: %d, new_count=%d, new_maxA=%d, new_maxB=%d,new_control=%d\n",which,new_count,new_maxA,new_maxB,new_control);
|
| 490 | |
| 491 | /* if we have a new count and we're on, update things */
|
| 492 | if (new_count != -1)
|
| 493 | {
|
| 494 | if (t->control & 0x8000)
|
| 495 | {
|
| 496 | internal_timer_sync(which);
|
| 497 | update_int_timer = 1;
|
| 498 | }
|
| 499 | t->count = new_count;
|
| 500 | }
|
| 501 | |
| 502 | /* if we have a new max and we're on, update things */
|
| 503 | if (new_maxA != -1 && new_maxA != t->maxA)
|
| 504 | {
|
| 505 | if (t->control & 0x8000)
|
| 506 | {
|
| 507 | internal_timer_sync(which);
|
| 508 | update_int_timer = 1;
|
| 509 | }
|
| 510 | t->maxA = new_maxA;
|
| 511 | if (new_maxA == 0)
|
| 512 | {
|
| 513 | new_maxA = 0x10000;
|
| 514 | }
|
| 515 | }
|
| 516 | |
| 517 | /* if we have a new max and we're on, update things */
|
| 518 | if (new_maxB != -1 && new_maxB != t->maxB)
|
| 519 | {
|
| 520 | if (t->control & 0x8000)
|
| 521 | {
|
| 522 | internal_timer_sync(which);
|
| 523 | update_int_timer = 1;
|
| 524 | }
|
| 525 | |
| 526 | t->maxB = new_maxB;
|
| 527 | |
| 528 | if (new_maxB == 0)
|
| 529 | {
|
| 530 | new_maxB = 0x10000;
|
| 531 | }
|
| 532 | }
|
| 533 | |
| 534 | |
| 535 | /* handle control changes */
|
| 536 | if (new_control != -1)
|
| 537 | {
|
| 538 | int diff;
|
| 539 | |
| 540 | /* merge back in the bits we don't modify */
|
| 541 | new_control = (new_control & ~0x1fc0) | (t->control & 0x1fc0);
|
| 542 | |
| 543 | /* handle the /INH bit */
|
| 544 | if (!(new_control & 0x4000))
|
| 545 | new_control = (new_control & ~0x8000) | (t->control & 0x8000);
|
| 546 | new_control &= ~0x4000;
|
| 547 | |
| 548 | /* check for control bits we don't handle */
|
| 549 | diff = new_control ^ t->control;
|
| 550 | if (diff & 0x001c)
|
| 551 | logerror("%05X:ERROR! -unsupported timer mode %04X\n",
|
| 552 | cpu_get_pc(cputag_get_cpu(machine, MAINCPU_TAG)), new_control);
|
| 553 | |
| 554 | /* if we have real changes, update things */
|
| 555 | if (diff != 0)
|
| 556 | {
|
| 557 | |
| 558 | /* if we're going off, make sure our timers are gone */
|
| 559 | if ((diff & 0x8000) && !(new_control & 0x8000))
|
| 560 | {
|
| 561 | /* compute the final count */
|
| 562 | internal_timer_sync(which);
|
| 563 | |
| 564 | /* nuke the timer and force the interrupt timer to be recomputed */
|
| 565 | timer_adjust_oneshot(t->time_timer, attotime_never, which);
|
| 566 | t->time_timer_active = 0;
|
| 567 | update_int_timer = 1;
|
| 568 | }
|
| 569 | |
| 570 | /* if we're going on, start the timers running */
|
| 571 | else if ((diff & 0x8000) && (new_control & 0x8000))
|
| 572 | {
|
| 573 | /* start the timing */
|
| 574 | timer_adjust_oneshot(t->time_timer, attotime_never, which);
|
| 575 | t->time_timer_active = 1;
|
| 576 | update_int_timer = 1;
|
| 577 | }
|
| 578 | |
| 579 | /* if something about the interrupt timer changed, force an update */
|
| 580 | if (!(diff & 0x8000) && (diff & 0x2000))
|
| 581 | {
|
| 582 | internal_timer_sync(which);
|
| 583 | update_int_timer = 1;
|
| 584 | }
|
| 585 | }
|
| 586 | |
| 587 | /* set the new control register */
|
| 588 | t->control = new_control;
|
| 589 | }
|
| 590 | |
| 591 | /* update the interrupt timer */
|
| 592 | if (update_int_timer)
|
| 593 | {
|
| 594 | if ((t->control & 0x8000) && (t->control & 0x2000))
|
| 595 | {
|
| 596 | int diff = t->maxA - t->count;
|
| 597 | if (diff <= 0)
|
| 598 | diff += 0x10000;
|
| 599 | timer_adjust_oneshot(t->int_timer, attotime_mul(ATTOTIME_IN_HZ(2000000), diff), which);
|
| 600 | if (LOG_TIMER) logerror("Set interrupt timer for %d\n", which);
|
| 601 | }
|
| 602 | else
|
| 603 | {
|
| 604 | timer_adjust_oneshot(t->int_timer, attotime_never, which);
|
| 605 | }
|
| 606 | }
|
| 607 | }
|
| 608 | |
| 609 | |
| 610 | |
| 611 | /*************************************
|
| 612 | *
|
| 613 | * 80186 internal DMA
|
| 614 | *
|
| 615 | *************************************/
|
| 616 | |
| 617 | static TIMER_CALLBACK(dma_timer_callback)
|
| 618 | {
|
| 619 | int which = param;
|
| 620 | struct dma_state *d = &i186.dma[which];
|
| 621 | |
| 622 | /* force an update and see if we're really done */
|
| 623 | //stream_update(dma_stream, 0);
|
| 624 | |
| 625 | /* complete the status update */
|
| 626 | d->control &= ~0x0002;
|
| 627 | d->source += d->count;
|
| 628 | d->count = 0;
|
| 629 | |
| 630 | /* check for interrupt generation */
|
| 631 | if (d->control & 0x0100)
|
| 632 | {
|
| 633 | if (LOG_DMA) logerror("DMA%d timer callback - requesting interrupt: count = %04X, source = %04X\n", which, d->count, d->source);
|
| 634 | i186.intr.request |= 0x04 << which;
|
| 635 | update_interrupt_state(machine);
|
| 636 | }
|
| 637 | }
|
| 638 | |
| 639 | |
| 640 | static void update_dma_control(running_machine *machine, int which, int new_control)
|
| 641 | {
|
| 642 | struct dma_state *d = &i186.dma[which];
|
| 643 | int diff;
|
| 644 | |
| 645 | /* handle the CHG bit */
|
| 646 | if (!(new_control & CHG_NOCHG))
|
| 647 | new_control = (new_control & ~ST_STOP) | (d->control & ST_STOP);
|
| 648 | new_control &= ~CHG_NOCHG;
|
| 649 | |
| 650 | /* check for control bits we don't handle */
|
| 651 | diff = new_control ^ d->control;
|
| 652 | if ((LOG_DMA) && (diff & 0x6811))
|
| 653 | logerror("%05X:ERROR! - unsupported DMA mode %04X\n",
|
| 654 | cpu_get_pc(cputag_get_cpu(machine, MAINCPU_TAG)), new_control);
|
| 655 | |
| 656 | /* if we're going live, set a timer */
|
| 657 | if ((diff & 0x0002) && (new_control & 0x0002))
|
| 658 | {
|
| 659 | /* make sure the parameters meet our expectations */
|
| 660 | if ((new_control & 0xfe00) != 0x1600)
|
| 661 | {
|
| 662 | if (LOG_DMA) logerror("Unexpected DMA control %02X\n", new_control);
|
| 663 | }
|
| 664 | else if (/*!is_redline &&*/ ((d->dest & 1) || (d->dest & 0x3f) > 0x0b))
|
| 665 | {
|
| 666 | if (LOG_DMA) logerror("Unexpected DMA destination %02X\n", d->dest);
|
| 667 | }
|
| 668 | else if (/*is_redline && */ (d->dest & 0xf000) != 0x4000 && (d->dest & 0xf000) != 0x5000)
|
| 669 | {
|
| 670 | if (LOG_DMA) logerror("Unexpected DMA destination %02X\n", d->dest);
|
| 671 | }
|
| 672 | |
| 673 | /* otherwise, set a timer */
|
| 674 | else
|
| 675 | {
|
| 676 | // int count = d->count;
|
| 677 | |
| 678 | /* adjust for redline racer */
|
| 679 | // int dacnum = (d->dest & 0x3f) / 2;
|
| 680 | |
| 681 | if (LOG_DMA) logerror("Initiated DMA %d - count = %04X, source = %04X, dest = %04X\n", which, d->count, d->source, d->dest);
|
| 682 | |
| 683 | d->finished = 0;
|
| 684 | /* timer_adjust_oneshot(d->finish_timer,
|
| 685 | ATTOTIME_IN_HZ(dac[dacnum].frequency) * (double)count, which);*/
|
| 686 | }
|
| 687 | }
|
| 688 | |
| 689 | /* set the new control register */
|
| 690 | d->control = new_control;
|
| 691 | }
|
| 692 | |
| 693 | static void drq_callback(running_machine *machine, int which)
|
| 694 | {
|
| 695 | struct dma_state *dma = &i186.dma[which];
|
| 696 | const address_space *memory_space = cpu_get_address_space(cputag_get_cpu(machine, MAINCPU_TAG), ADDRESS_SPACE_PROGRAM);
|
| 697 | const address_space *io_space = cpu_get_address_space(cputag_get_cpu(machine, MAINCPU_TAG), ADDRESS_SPACE_IO);
|
| 698 | |
| 699 | const address_space *src_space;
|
| 700 | const address_space *dest_space;
|
| 701 | |
| 702 | UINT16 dma_word;
|
| 703 | UINT8 dma_byte;
|
| 704 | UINT8 incdec_size;
|
| 705 | |
| 706 | if (LOG_DMA)
|
| 707 | logerror("Control=%04X, src=%05X, dest=%05X, count=%04X\n",dma->control,dma->source,dma->dest,dma->count);
|
| 708 | |
| 709 | if(!(dma->control & ST_STOP))
|
| 710 | {
|
| 711 | logerror("%05X:ERROR! - drq%d with dma channel stopped\n",
|
| 712 | cpu_get_pc(cputag_get_cpu(machine, MAINCPU_TAG)), which);
|
| 713 |
|
| 714 | return;
|
| 715 | }
|
| 716 |
|
| 717 | if(dma->control & DEST_MIO)
|
| 718 | dest_space=memory_space;
|
| 719 | else
|
| 720 | dest_space=io_space;
|
| 721 | |
| 722 | if(dma->control & SRC_MIO)
|
| 723 | src_space=memory_space;
|
| 724 | else
|
| 725 | src_space=io_space;
|
| 726 | |
| 727 | // Do the transfer
|
| 728 | if(dma->control & BYTE_WORD)
|
| 729 | {
|
| 730 | dma_word=memory_read_word(src_space,dma->source);
|
| 731 | memory_write_word(dest_space,dma->dest,dma_word);
|
| 732 | incdec_size=2;
|
| 733 | }
|
| 734 | else
|
| 735 | {
|
| 736 | dma_byte=memory_read_byte(src_space,dma->source);
|
| 737 | memory_write_byte(dest_space,dma->dest,dma_byte);
|
| 738 | incdec_size=1;
|
| 739 | }
|
| 740 | |
| 741 | // Increment or Decrement destination ans source pointers as needed
|
| 742 | switch (dma->control & DEST_INCDEC_MASK)
|
| 743 | {
|
| 744 | case DEST_DECREMENT : dma->dest -= incdec_size;
|
| 745 | case DEST_INCREMENT : dma->dest += incdec_size;
|
| 746 | }
|
| 747 | |
| 748 | switch (dma->control & SRC_INCDEC_MASK)
|
| 749 | {
|
| 750 | case SRC_DECREMENT : dma->source -= incdec_size;
|
| 751 | case SRC_INCREMENT : dma->source += incdec_size;
|
| 752 | }
|
| 753 | |
| 754 | // decrement count
|
| 755 | dma->count -= 1;
|
| 756 | |
| 757 | // Terminate if count is zero, and terminate flag set
|
| 758 | if((dma->control & TERMINATE_ON_ZERO) && (dma->count==0))
|
| 759 | {
|
| 760 | dma->control &= ~ST_STOP;
|
| 761 | if (LOG_DMA) logerror("DMA terminated\n");
|
| 762 | }
|
| 763 | |
| 764 | // Interrupt if count is zero, and interrupt flag set
|
| 765 | if((dma->control & INTERRUPT_ON_ZERO) && (dma->count==0))
|
| 766 | {
|
| 767 | if (LOG_DMA) logerror("DMA%d - requesting interrupt: count = %04X, source = %04X\n", which, dma->count, dma->source);
|
| 768 | i186.intr.request |= 0x04 << which;
|
| 769 | update_interrupt_state(machine); |
| 770 | }
|
| 771 | }
|
| 772 | |
| 773 | /*-------------------------------------------------------------------------*/
|
| 774 | /* Name: rmnimbus */
|
| 775 | /* Desc: CPU - Initialize the 80186 CPU */
|
| 776 | /*-------------------------------------------------------------------------*/
|
| 777 | static void nimbus_cpu_init(running_machine *machine)
|
| 778 | {
|
| 779 | |
| 780 | logerror("Machine reset\n");
|
| 781 | |
| 782 | /* create timers here so they stick around */
|
| 783 | i186.timer[0].int_timer = timer_alloc(machine, internal_timer_int, NULL);
|
| 784 | i186.timer[1].int_timer = timer_alloc(machine, internal_timer_int, NULL);
|
| 785 | i186.timer[2].int_timer = timer_alloc(machine, internal_timer_int, NULL);
|
| 786 | i186.timer[0].time_timer = timer_alloc(machine, NULL, NULL);
|
| 787 | i186.timer[1].time_timer = timer_alloc(machine, NULL, NULL);
|
| 788 | i186.timer[2].time_timer = timer_alloc(machine, NULL, NULL);
|
| 789 | i186.dma[0].finish_timer = timer_alloc(machine, dma_timer_callback, NULL);
|
| 790 | i186.dma[1].finish_timer = timer_alloc(machine, dma_timer_callback, NULL);
|
| 791 | }
|
| 792 | |
| 793 | static void nimbus_cpu_reset(running_machine *machine)
|
| 794 | {
|
| 795 | /* reset the interrupt state */
|
| 796 | i186.intr.priority_mask = 0x0007;
|
| 797 | i186.intr.timer = 0x000f;
|
| 798 | i186.intr.dma[0] = 0x000f;
|
| 799 | i186.intr.dma[1] = 0x000f;
|
| 800 | i186.intr.ext[0] = 0x000f;
|
| 801 | i186.intr.ext[1] = 0x000f;
|
| 802 | i186.intr.ext[2] = 0x000f;
|
| 803 | i186.intr.ext[3] = 0x000f;
|
| 804 | i186.intr.in_service = 0x0000;
|
| 805 | |
| 806 | /* External vectors by default to internal int 0/1 vectors */
|
| 807 | i186.intr.ext_vector[0] = 0x000C;
|
| 808 | i186.intr.ext_vector[1] = 0x000D;
|
| 809 |
|
| 810 | i186.intr.pending = 0x0000;
|
| 811 | i186.intr.ack_mask = 0x0000;
|
| 812 | i186.intr.request = 0x0000;
|
| 813 | i186.intr.status = 0x0000;
|
| 814 | i186.intr.poll_status = 0x0000;
|
| 815 |
|
| 816 | logerror("CPU reset done\n");
|
| 817 | }
|
| 818 | |
| 819 | READ16_HANDLER( i186_internal_port_r )
|
| 820 | {
|
| 821 | int temp, which;
|
| 822 | |
| 823 | switch (offset)
|
| 824 | {
|
| 825 | case 0x11:
|
| 826 | logerror("%05X:ERROR - read from 80186 EOI\n", cpu_get_pc(space->cpu));
|
| 827 | break;
|
| 828 | |
| 829 | case 0x12:
|
| 830 | if (LOG_PORTS) logerror("%05X:read 80186 interrupt poll\n", cpu_get_pc(space->cpu));
|
| 831 | if (i186.intr.poll_status & 0x8000)
|
| 832 | int_callback(cputag_get_cpu(space->machine, MAINCPU_TAG), 0);
|
| 833 | return i186.intr.poll_status;
|
| 834 | |
| 835 | case 0x13:
|
| 836 | if (LOG_PORTS) logerror("%05X:read 80186 interrupt poll status\n", cpu_get_pc(space->cpu));
|
| 837 | return i186.intr.poll_status;
|
| 838 | |
| 839 | case 0x14:
|
| 840 | if (LOG_PORTS) logerror("%05X:read 80186 interrupt mask\n", cpu_get_pc(space->cpu));
|
| 841 | temp = (i186.intr.timer >> 3) & 0x01;
|
| 842 | temp |= (i186.intr.dma[0] >> 1) & 0x04;
|
| 843 | temp |= (i186.intr.dma[1] >> 0) & 0x08;
|
| 844 | temp |= (i186.intr.ext[0] << 1) & 0x10;
|
| 845 | temp |= (i186.intr.ext[1] << 2) & 0x20;
|
| 846 | temp |= (i186.intr.ext[2] << 3) & 0x40;
|
| 847 | temp |= (i186.intr.ext[3] << 4) & 0x80;
|
| 848 | return temp;
|
| 849 | |
| 850 | case 0x15:
|
| 851 | if (LOG_PORTS) logerror("%05X:read 80186 interrupt priority mask\n", cpu_get_pc(space->cpu));
|
| 852 | return i186.intr.priority_mask;
|
| 853 | |
| 854 | case 0x16:
|
| 855 | if (LOG_PORTS) logerror("%05X:read 80186 interrupt in-service\n", cpu_get_pc(space->cpu));
|
| 856 | return i186.intr.in_service;
|
| 857 | |
| 858 | case 0x17:
|
| 859 | if (LOG_PORTS) logerror("%05X:read 80186 interrupt request\n", cpu_get_pc(space->cpu));
|
| 860 | temp = i186.intr.request & ~0x0001;
|
| 861 | if (i186.intr.status & 0x0007)
|
| 862 | temp |= 1;
|
| 863 | return temp;
|
| 864 | |
| 865 | case 0x18:
|
| 866 | if (LOG_PORTS) logerror("%05X:read 80186 interrupt status\n", cpu_get_pc(space->cpu));
|
| 867 | return i186.intr.status;
|
| 868 | |
| 869 | case 0x19:
|
| 870 | if (LOG_PORTS) logerror("%05X:read 80186 timer interrupt control\n", cpu_get_pc(space->cpu));
|
| 871 | return i186.intr.timer;
|
| 872 | |
| 873 | case 0x1a:
|
| 874 | if (LOG_PORTS) logerror("%05X:read 80186 DMA 0 interrupt control\n", cpu_get_pc(space->cpu));
|
| 875 | return i186.intr.dma[0];
|
| 876 | |
| 877 | case 0x1b:
|
| 878 | if (LOG_PORTS) logerror("%05X:read 80186 DMA 1 interrupt control\n", cpu_get_pc(space->cpu));
|
| 879 | return i186.intr.dma[1];
|
| 880 | |
| 881 | case 0x1c:
|
| 882 | if (LOG_PORTS) logerror("%05X:read 80186 INT 0 interrupt control\n", cpu_get_pc(space->cpu));
|
| 883 | return i186.intr.ext[0];
|
| 884 | |
| 885 | case 0x1d:
|
| 886 | if (LOG_PORTS) logerror("%05X:read 80186 INT 1 interrupt control\n", cpu_get_pc(space->cpu));
|
| 887 | return i186.intr.ext[1];
|
| 888 | |
| 889 | case 0x1e:
|
| 890 | if (LOG_PORTS) logerror("%05X:read 80186 INT 2 interrupt control\n", cpu_get_pc(space->cpu));
|
| 891 | return i186.intr.ext[2];
|
| 892 | |
| 893 | case 0x1f:
|
| 894 | if (LOG_PORTS) logerror("%05X:read 80186 INT 3 interrupt control\n", cpu_get_pc(space->cpu));
|
| 895 | return i186.intr.ext[3];
|
| 896 | |
| 897 | case 0x28:
|
| 898 | case 0x2c:
|
| 899 | case 0x30:
|
| 900 | if (LOG_PORTS) logerror("%05X:read 80186 Timer %d count\n", cpu_get_pc(space->cpu), (offset - 0x28) / 4);
|
| 901 | which = (offset - 0x28) / 4;
|
| 902 | if (!(offset & 1))
|
| 903 | internal_timer_sync(which);
|
| 904 | return i186.timer[which].count;
|
| 905 | |
| 906 | case 0x29:
|
| 907 | case 0x2d:
|
| 908 | case 0x31:
|
| 909 | if (LOG_PORTS) logerror("%05X:read 80186 Timer %d max A\n", cpu_get_pc(space->cpu), (offset - 0x29) / 4);
|
| 910 | which = (offset - 0x29) / 4;
|
| 911 | return i186.timer[which].maxA;
|
| 912 | |
| 913 | case 0x2a:
|
| 914 | case 0x2e:
|
| 915 | logerror("%05X:read 80186 Timer %d max B\n", cpu_get_pc(space->cpu), (offset - 0x2a) / 4);
|
| 916 | which = (offset - 0x2a) / 4;
|
| 917 | return i186.timer[which].maxB;
|
| 918 | |
| 919 | case 0x2b:
|
| 920 | case 0x2f:
|
| 921 | case 0x33:
|
| 922 | if (LOG_PORTS) logerror("%05X:read 80186 Timer %d control\n", cpu_get_pc(space->cpu), (offset - 0x2b) / 4);
|
| 923 | which = (offset - 0x2b) / 4;
|
| 924 | return i186.timer[which].control;
|
| 925 | |
| 926 | case 0x50:
|
| 927 | if (LOG_PORTS) logerror("%05X:read 80186 upper chip select\n", cpu_get_pc(space->cpu));
|
| 928 | return i186.mem.upper;
|
| 929 | |
| 930 | case 0x51:
|
| 931 | if (LOG_PORTS) logerror("%05X:read 80186 lower chip select\n", cpu_get_pc(space->cpu));
|
| 932 | return i186.mem.lower;
|
| 933 | |
| 934 | case 0x52:
|
| 935 | if (LOG_PORTS) logerror("%05X:read 80186 peripheral chip select\n", cpu_get_pc(space->cpu));
|
| 936 | return i186.mem.peripheral;
|
| 937 | |
| 938 | case 0x53:
|
| 939 | if (LOG_PORTS) logerror("%05X:read 80186 middle chip select\n", cpu_get_pc(space->cpu));
|
| 940 | return i186.mem.middle;
|
| 941 | |
| 942 | case 0x54:
|
| 943 | if (LOG_PORTS) logerror("%05X:read 80186 middle P chip select\n", cpu_get_pc(space->cpu));
|
| 944 | return i186.mem.middle_size;
|
| 945 | |
| 946 | case 0x60:
|
| 947 | case 0x68:
|
| 948 | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d lower source address\n", cpu_get_pc(space->cpu), (offset - 0x60) / 8);
|
| 949 | which = (offset - 0x60) / 8;
|
| 950 | // stream_update(dma_stream, 0);
|
| 951 | return i186.dma[which].source;
|
| 952 | |
| 953 | case 0x61:
|
| 954 | case 0x69:
|
| 955 | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d upper source address\n", cpu_get_pc(space->cpu), (offset - 0x61) / 8);
|
| 956 | which = (offset - 0x61) / 8;
|
| 957 | // stream_update(dma_stream, 0);
|
| 958 | return i186.dma[which].source >> 16;
|
| 959 | |
| 960 | case 0x62:
|
| 961 | case 0x6a:
|
| 962 | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d lower dest address\n", cpu_get_pc(space->cpu), (offset - 0x62) / 8);
|
| 963 | which = (offset - 0x62) / 8;
|
| 964 | // stream_update(dma_stream, 0);
|
| 965 | return i186.dma[which].dest;
|
| 966 | |
| 967 | case 0x63:
|
| 968 | case 0x6b:
|
| 969 | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d upper dest address\n", cpu_get_pc(space->cpu), (offset - 0x63) / 8);
|
| 970 | which = (offset - 0x63) / 8;
|
| 971 | // stream_update(dma_stream, 0);
|
| 972 | return i186.dma[which].dest >> 16;
|
| 973 | |
| 974 | case 0x64:
|
| 975 | case 0x6c:
|
| 976 | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d transfer count\n", cpu_get_pc(space->cpu), (offset - 0x64) / 8);
|
| 977 | which = (offset - 0x64) / 8;
|
| 978 | // stream_update(dma_stream, 0);
|
| 979 | return i186.dma[which].count;
|
| 980 | |
| 981 | case 0x65:
|
| 982 | case 0x6d:
|
| 983 | if (LOG_PORTS) logerror("%05X:read 80186 DMA%d control\n", cpu_get_pc(space->cpu), (offset - 0x65) / 8);
|
| 984 | which = (offset - 0x65) / 8;
|
| 985 | // stream_update(dma_stream, 0);
|
| 986 | return i186.dma[which].control;
|
| 987 | |
| 988 | default:
|
| 989 | logerror("%05X:read 80186 port %02X\n", cpu_get_pc(space->cpu), offset);
|
| 990 | break;
|
| 991 | }
|
| 992 | return 0x00;
|
| 993 | }
|
| 994 | |
| 995 | /*************************************
|
| 996 | *
|
| 997 | * 80186 internal I/O writes
|
| 998 | *
|
| 999 | *************************************/
|
| 1000 | |
| 1001 | WRITE16_HANDLER( i186_internal_port_w )
|
| 1002 | {
|
| 1003 | int temp, which, data16 = data;
|
| 1004 | |
| 1005 | switch (offset)
|
| 1006 | {
|
| 1007 | case 0x11:
|
| 1008 | if (LOG_PORTS) logerror("%05X:80186 EOI = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1009 | handle_eoi(space->machine,0x8000);
|
| 1010 | update_interrupt_state(space->machine);
|
| 1011 | break;
|
| 1012 | |
| 1013 | case 0x12:
|
| 1014 | logerror("%05X:ERROR - write to 80186 interrupt poll = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1015 | break;
|
| 1016 | |
| 1017 | case 0x13:
|
| 1018 | logerror("%05X:ERROR - write to 80186 interrupt poll status = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1019 | break;
|
| 1020 | |
| 1021 | case 0x14:
|
| 1022 | if (LOG_PORTS) logerror("%05X:80186 interrupt mask = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1023 | i186.intr.timer = (i186.intr.timer & ~0x08) | ((data16 << 3) & 0x08);
|
| 1024 | i186.intr.dma[0] = (i186.intr.dma[0] & ~0x08) | ((data16 << 1) & 0x08);
|
| 1025 | i186.intr.dma[1] = (i186.intr.dma[1] & ~0x08) | ((data16 << 0) & 0x08);
|
| 1026 | i186.intr.ext[0] = (i186.intr.ext[0] & ~0x08) | ((data16 >> 1) & 0x08);
|
| 1027 | i186.intr.ext[1] = (i186.intr.ext[1] & ~0x08) | ((data16 >> 2) & 0x08);
|
| 1028 | i186.intr.ext[2] = (i186.intr.ext[2] & ~0x08) | ((data16 >> 3) & 0x08);
|
| 1029 | i186.intr.ext[3] = (i186.intr.ext[3] & ~0x08) | ((data16 >> 4) & 0x08);
|
| 1030 | update_interrupt_state(space->machine);
|
| 1031 | break;
|
| 1032 | |
| 1033 | case 0x15:
|
| 1034 | if (LOG_PORTS) logerror("%05X:80186 interrupt priority mask = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1035 | i186.intr.priority_mask = data16 & 0x0007;
|
| 1036 | update_interrupt_state(space->machine);
|
| 1037 | break;
|
| 1038 | |
| 1039 | case 0x16:
|
| 1040 | if (LOG_PORTS) logerror("%05X:80186 interrupt in-service = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1041 | i186.intr.in_service = data16 & 0x00ff;
|
| 1042 | update_interrupt_state(space->machine);
|
| 1043 | break;
|
| 1044 | |
| 1045 | case 0x17:
|
| 1046 | if (LOG_PORTS) logerror("%05X:80186 interrupt request = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1047 | i186.intr.request = (i186.intr.request & ~0x00c0) | (data16 & 0x00c0);
|
| 1048 | update_interrupt_state(space->machine);
|
| 1049 | break;
|
| 1050 | |
| 1051 | case 0x18:
|
| 1052 | if (LOG_PORTS) logerror("%05X:WARNING - wrote to 80186 interrupt status = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1053 | i186.intr.status = (i186.intr.status & ~0x8007) | (data16 & 0x8007);
|
| 1054 | update_interrupt_state(space->machine);
|
| 1055 | break;
|
| 1056 | |
| 1057 | case 0x19:
|
| 1058 | if (LOG_PORTS) logerror("%05X:80186 timer interrupt contol = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1059 | i186.intr.timer = data16 & 0x000f;
|
| 1060 | break;
|
| 1061 | |
| 1062 | case 0x1a:
|
| 1063 | if (LOG_PORTS) logerror("%05X:80186 DMA 0 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1064 | i186.intr.dma[0] = data16 & 0x000f;
|
| 1065 | break;
|
| 1066 | |
| 1067 | case 0x1b:
|
| 1068 | if (LOG_PORTS) logerror("%05X:80186 DMA 1 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1069 | i186.intr.dma[1] = data16 & 0x000f;
|
| 1070 | break;
|
| 1071 | |
| 1072 | case 0x1c:
|
| 1073 | if (LOG_PORTS) logerror("%05X:80186 INT 0 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1074 | i186.intr.ext[0] = data16 & 0x007f;
|
| 1075 | break;
|
| 1076 | |
| 1077 | case 0x1d:
|
| 1078 | if (LOG_PORTS) logerror("%05X:80186 INT 1 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1079 | i186.intr.ext[1] = data16 & 0x007f;
|
| 1080 | break;
|
| 1081 | |
| 1082 | case 0x1e:
|
| 1083 | if (LOG_PORTS) logerror("%05X:80186 INT 2 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1084 | i186.intr.ext[2] = data16 & 0x001f;
|
| 1085 | break;
|
| 1086 | |
| 1087 | case 0x1f:
|
| 1088 | if (LOG_PORTS) logerror("%05X:80186 INT 3 interrupt control = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1089 | i186.intr.ext[3] = data16 & 0x001f;
|
| 1090 | break;
|
| 1091 | |
| 1092 | case 0x28:
|
| 1093 | case 0x2c:
|
| 1094 | case 0x30:
|
| 1095 | if (LOG_PORTS) logerror("%05X:80186 Timer %d count = %04X\n", cpu_get_pc(space->cpu), (offset - 0x28) / 4, data16);
|
| 1096 | which = (offset - 0x28) / 4;
|
| 1097 | internal_timer_update(space->machine,which, data16, -1, -1, -1);
|
| 1098 | break;
|
| 1099 | |
| 1100 | case 0x29:
|
| 1101 | case 0x2d:
|
| 1102 | case 0x31:
|
| 1103 | if (LOG_PORTS) logerror("%05X:80186 Timer %d max A = %04X\n", cpu_get_pc(space->cpu), (offset - 0x29) / 4, data16);
|
| 1104 | which = (offset - 0x29) / 4;
|
| 1105 | internal_timer_update(space->machine,which, -1, data16, -1, -1);
|
| 1106 | break;
|
| 1107 | |
| 1108 | case 0x2a:
|
| 1109 | case 0x2e:
|
| 1110 | if (LOG_PORTS) logerror("%05X:80186 Timer %d max B = %04X\n", cpu_get_pc(space->cpu), (offset - 0x2a) / 4, data16);
|
| 1111 | which = (offset - 0x2a) / 4;
|
| 1112 | internal_timer_update(space->machine,which, -1, -1, data16, -1);
|
| 1113 | break;
|
| 1114 | |
| 1115 | case 0x2b:
|
| 1116 | case 0x2f:
|
| 1117 | case 0x33:
|
| 1118 | if (LOG_PORTS) logerror("%05X:80186 Timer %d control = %04X\n", cpu_get_pc(space->cpu), (offset - 0x2b) / 4, data16);
|
| 1119 | which = (offset - 0x2b) / 4;
|
| 1120 | internal_timer_update(space->machine,which, -1, -1, -1, data16);
|
| 1121 | break;
|
| 1122 | |
| 1123 | case 0x50:
|
| 1124 | if (LOG_PORTS) logerror("%05X:80186 upper chip select = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1125 | i186.mem.upper = data16 | 0xc038;
|
| 1126 | break;
|
| 1127 | |
| 1128 | case 0x51:
|
| 1129 | if (LOG_PORTS) logerror("%05X:80186 lower chip select = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1130 | i186.mem.lower = (data16 & 0x3fff) | 0x0038; printf("%X",i186.mem.lower);
|
| 1131 | break;
|
| 1132 | |
| 1133 | case 0x52:
|
| 1134 | if (LOG_PORTS) logerror("%05X:80186 peripheral chip select = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1135 | i186.mem.peripheral = data16 | 0x0038;
|
| 1136 | break;
|
| 1137 | |
| 1138 | case 0x53:
|
| 1139 | if (LOG_PORTS) logerror("%05X:80186 middle chip select = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1140 | i186.mem.middle = data16 | 0x01f8;
|
| 1141 | break;
|
| 1142 | |
| 1143 | case 0x54:
|
| 1144 | if (LOG_PORTS) logerror("%05X:80186 middle P chip select = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1145 | i186.mem.middle_size = data16 | 0x8038;
|
| 1146 | |
| 1147 | temp = (i186.mem.peripheral & 0xffc0) << 4;
|
| 1148 | if (i186.mem.middle_size & 0x0040)
|
| 1149 | {
|
| 1150 | // install_mem_read_handler(2, temp, temp + 0x2ff, peripheral_r);
|
| 1151 | // install_mem_write_handler(2, temp, temp + 0x2ff, peripheral_w);
|
| 1152 | }
|
| 1153 | else
|
| 1154 | {
|
| 1155 | temp &= 0xffff;
|
| 1156 | // install_port_read_handler(2, temp, temp + 0x2ff, peripheral_r);
|
| 1157 | // install_port_write_handler(2, temp, temp + 0x2ff, peripheral_w);
|
| 1158 | }
|
| 1159 | |
| 1160 | /* we need to do this at a time when the I86 context is swapped in */
|
| 1161 | /* this register is generally set once at startup and never again, so it's a good */
|
| 1162 | /* time to set it up */
|
| 1163 | cpu_set_irq_callback(space->cpu, int_callback);
|
| 1164 | break;
|
| 1165 | |
| 1166 | case 0x60:
|
| 1167 | case 0x68:
|
| 1168 | if (LOG_PORTS) logerror("%05X:80186 DMA%d lower source address = %04X\n", cpu_get_pc(space->cpu), (offset - 0x60) / 8, data16);
|
| 1169 | which = (offset - 0x60) / 8;
|
| 1170 | // stream_update(dma_stream, 0);
|
| 1171 | i186.dma[which].source = (i186.dma[which].source & ~0x0ffff) | (data16 & 0x0ffff);
|
| 1172 | break;
|
| 1173 | |
| 1174 | case 0x61:
|
| 1175 | case 0x69:
|
| 1176 | if (LOG_PORTS) logerror("%05X:80186 DMA%d upper source address = %04X\n", cpu_get_pc(space->cpu), (offset - 0x61) / 8, data16);
|
| 1177 | which = (offset - 0x61) / 8;
|
| 1178 | // stream_update(dma_stream, 0);
|
| 1179 | i186.dma[which].source = (i186.dma[which].source & ~0xf0000) | ((data16 << 16) & 0xf0000);
|
| 1180 | break;
|
| 1181 | |
| 1182 | case 0x62:
|
| 1183 | case 0x6a:
|
| 1184 | if (LOG_PORTS) logerror("%05X:80186 DMA%d lower dest address = %04X\n", cpu_get_pc(space->cpu), (offset - 0x62) / 8, data16);
|
| 1185 | which = (offset - 0x62) / 8;
|
| 1186 | // stream_update(dma_stream, 0);
|
| 1187 | i186.dma[which].dest = (i186.dma[which].dest & ~0x0ffff) | (data16 & 0x0ffff);
|
| 1188 | break;
|
| 1189 | |
| 1190 | case 0x63:
|
| 1191 | case 0x6b:
|
| 1192 | if (LOG_PORTS) logerror("%05X:80186 DMA%d upper dest address = %04X\n", cpu_get_pc(space->cpu), (offset - 0x63) / 8, data16);
|
| 1193 | which = (offset - 0x63) / 8;
|
| 1194 | // stream_update(dma_stream, 0);
|
| 1195 | i186.dma[which].dest = (i186.dma[which].dest & ~0xf0000) | ((data16 << 16) & 0xf0000);
|
| 1196 | break;
|
| 1197 | |
| 1198 | case 0x64:
|
| 1199 | case 0x6c:
|
| 1200 | if (LOG_PORTS) logerror("%05X:80186 DMA%d transfer count = %04X\n", cpu_get_pc(space->cpu), (offset - 0x64) / 8, data16);
|
| 1201 | which = (offset - 0x64) / 8;
|
| 1202 | // stream_update(dma_stream, 0);
|
| 1203 | i186.dma[which].count = data16;
|
| 1204 | break;
|
| 1205 | |
| 1206 | case 0x65:
|
| 1207 | case 0x6d:
|
| 1208 | if (LOG_PORTS) logerror("%05X:80186 DMA%d control = %04X\n", cpu_get_pc(space->cpu), (offset - 0x65) / 8, data16);
|
| 1209 | which = (offset - 0x65) / 8;
|
| 1210 | // stream_update(dma_stream, 0);
|
| 1211 | update_dma_control(space->machine, which, data16);
|
| 1212 | break;
|
| 1213 | |
| 1214 | case 0x7f:
|
| 1215 | if (LOG_PORTS) logerror("%05X:80186 relocation register = %04X\n", cpu_get_pc(space->cpu), data16);
|
| 1216 | |
| 1217 | /* we assume here there that this doesn't happen too often */
|
| 1218 | /* plus, we can't really remove the old memory range, so we also assume that it's */
|
| 1219 | /* okay to leave us mapped where we were */
|
| 1220 | temp = (data16 & 0x0fff) << 8;
|
| 1221 | if (data16 & 0x1000)
|
| 1222 | {
|
| 1223 | memory_install_read16_handler(cputag_get_address_space(space->machine, MAINCPU_TAG, ADDRESS_SPACE_PROGRAM), temp, temp + 0xff, 0, 0, i186_internal_port_r);
|
| 1224 | memory_install_write16_handler(cputag_get_address_space(space->machine, MAINCPU_TAG, ADDRESS_SPACE_PROGRAM), temp, temp + 0xff, 0, 0, i186_internal_port_w);
|
| 1225 | }
|
| 1226 | else
|
| 1227 | {
|
| 1228 | temp &= 0xffff;
|
| 1229 | memory_install_read16_handler(cputag_get_address_space(space->machine, MAINCPU_TAG, ADDRESS_SPACE_IO), temp, temp + 0xff, 0, 0, i186_internal_port_r);
|
| 1230 | memory_install_write16_handler(cputag_get_address_space(space->machine, MAINCPU_TAG, ADDRESS_SPACE_IO), temp, temp + 0xff, 0, 0, i186_internal_port_w);
|
| 1231 | }
|
| 1232 | /* popmessage("Sound CPU reset");*/
|
| 1233 | break;
|
| 1234 | |
| 1235 | default:
|
| 1236 | logerror("%05X:80186 port %02X = %04X\n", cpu_get_pc(space->cpu), offset, data16);
|
| 1237 | break;
|
| 1238 | }
|
| 1239 | }
|
| 1240 | |
| 1241 | MACHINE_RESET(nimbus)
|
| 1242 | {
|
| 1243 | /* CPU */
|
| 1244 | nimbus_cpu_reset(machine); |
| 1245 | fdc_reset();
|
| 1246 | keyboard_reset();
|
| 1247 | }
|
| 1248 | |
| 1249 | DRIVER_INIT(nimbus)
|
| 1250 | {
|
| 1251 | }
|
| 1252 | |
| 1253 | MACHINE_START( nimbus )
|
| 1254 | {
|
| 1255 | /* init cpu */
|
| 1256 | nimbus_cpu_init(machine);
|
| 1257 | |
| 1258 | keyboard.keyscan_timer=timer_alloc(machine, keyscan_callback, NULL);
|
| 1259 | |
| 1260 | /* setup debug commands */
|
| 1261 | if (machine->debug_flags & DEBUG_FLAG_ENABLED)
|
| 1262 | {
|
| 1263 | debug_console_register_command(machine, "nimbus_irq", CMDFLAG_NONE, 0, 0, 1, execute_debug_irq);
|
| 1264 | debug_console_register_command(machine, "nimbus_intmasks", CMDFLAG_NONE, 0, 0, 0, execute_debug_intmasks);
|
| 1265 | |
| 1266 | /* set up the instruction hook */
|
| 1267 | debug_cpu_set_instruction_hook(cputag_get_cpu(machine, MAINCPU_TAG), instruction_hook);
|
| 1268 |
|
| 1269 | }
|
| 1270 | }
|
| 1271 | |
| 1272 | static void execute_debug_irq(running_machine *machine, int ref, int params, const char *param[])
|
| 1273 | {
|
| 1274 | int IntNo;
|
| 1275 | int IntMask;
|
| 1276 | |
| 1277 | if(params>0)
|
| 1278 | {
|
| 1279 | sscanf(param[0],"%d",&IntNo);
|
| 1280 | |
| 1281 | IntMask=0x0000;
|
| 1282 | |
| 1283 | switch (IntNo)
|
| 1284 | {
|
| 1285 | case 0 : IntMask=0x010; break;
|
| 1286 | case 1 : IntMask=0x020; break;
|
| 1287 | case 2 : IntMask=0x040; break;
|
| 1288 | case 3 : IntMask=0x080; break;
|
| 1289 | }
|
| 1290 | |
| 1291 | i186.intr.request |= IntMask;
|
| 1292 | update_interrupt_state(machine);
|
| 1293 | |
| 1294 | debug_console_printf(machine,"triggering IRQ%d, IntMask=%4.4X, i186.intr.request=%4.4X\n",IntNo,IntMask,i186.intr.request);
|
| 1295 | |
| 1296 | // cputag_set_input_line(machine, MAINCPU_TAG, IntNo, HOLD_LINE );
|
| 1297 | // cputag_set_input_line(machine, MAINCPU_TAG, IntNo, CLEAR_LINE );
|
| 1298 | |
| 1299 | }
|
| 1300 | else
|
| 1301 | {
|
| 1302 | debug_console_printf(machine,"Error, you must supply an intno to trigger\n");
|
| 1303 | }
|
| 1304 |
|
| 1305 | |
| 1306 | }
|
| 1307 | |
| 1308 | |
| 1309 | static void execute_debug_intmasks(running_machine *machine, int ref, int params, const char *param[])
|
| 1310 | {
|
| 1311 | int IntNo;
|
| 1312 | |
| 1313 | |
| 1314 | debug_console_printf(machine,"i186.intr.priority_mask=%4X\n",i186.intr.priority_mask);
|
| 1315 | for(IntNo=0; IntNo<4; IntNo++)
|
| 1316 | {
|
| 1317 | debug_console_printf(machine,"extInt%d mask=%4X\n",IntNo,i186.intr.ext[IntNo]);
|
| 1318 | }
|
| 1319 | |
| 1320 | debug_console_printf(machine,"i186.intr.request = %04X\n",i186.intr.request);
|
| 1321 | debug_console_printf(machine,"i186.intr.ack_mask = %04X\n",i186.intr.ack_mask);
|
| 1322 | debug_console_printf(machine,"i186.intr.in_service= %04X\n",i186.intr.in_service);
|
| 1323 | }
|
| 1324 | |
| 1325 | /*-----------------------------------------------
|
| 1326 | instruction_hook - per-instruction hook
|
| 1327 | -----------------------------------------------*/
|
| 1328 | |
| 1329 | static int instruction_hook(const device_config *device, offs_t curpc)
|
| 1330 | {
|
| 1331 | const address_space *space = cpu_get_address_space(device, ADDRESS_SPACE_PROGRAM);
|
| 1332 | UINT8 *addr_ptr;
|
| 1333 | |
| 1334 | addr_ptr = memory_get_read_ptr(space,curpc);
|
| 1335 | |
| 1336 | if ((addr_ptr !=NULL) && (addr_ptr[0]==0xCD) && (addr_ptr[1]==0xF0))
|
| 1337 | decode_subbios(device,curpc);
|
| 1338 | |
| 1339 | return 0;
|
| 1340 | }
|
| 1341 | |
| 1342 | #define set_type(type_name) sprintf(type_str,type_name)
|
| 1343 | #define set_drv(drv_name) sprintf(drv_str,drv_name)
|
| 1344 | #define set_func(func_name) sprintf(func_str,func_name)
|
| 1345 | |
| 1346 | static void decode_subbios(const device_config *device,offs_t pc)
|
| 1347 | {
|
| 1348 | char type_str[80];
|
| 1349 | char drv_str[80];
|
| 1350 | char func_str[80];
|
| 1351 | |
| 1352 | void (*dump_dssi)(const device_config *,UINT16, UINT16) = NULL;
|
| 1353 | |
| 1354 | const device_config *cpu = cputag_get_cpu(device->machine,MAINCPU_TAG);
|
| 1355 | |
| 1356 | UINT16 ax = cpu_get_reg(cpu,I8086_AX);
|
| 1357 | UINT16 bx = cpu_get_reg(cpu,I8086_BX);
|
| 1358 | UINT16 cx = cpu_get_reg(cpu,I8086_CX);
|
| 1359 | UINT16 ds = cpu_get_reg(cpu,I8086_DS);
|
| 1360 | UINT16 si = cpu_get_reg(cpu,I8086_SI);
|
| 1361 | |
| 1362 | logerror("=======================================================================\n");
|
| 1363 | logerror("Sub-bios call at %08X, AX=%04X, BX=%04X, CX=%04X, DS:SI=%04X:%04X\n",pc,ax,bx,cx,ds,si);
|
| 1364 | |
| 1365 | set_type("invalid");
|
| 1366 | set_drv("invalid");
|
| 1367 | set_func("invalid");
|
| 1368 | |
| 1369 | |
| 1370 | switch (cx)
|
| 1371 | {
|
| 1372 | case 0 : |
| 1373 | {
|
| 1374 | set_type("t_mummu");
|
| 1375 | set_drv("d_mummu");
|
| 1376 | |
| 1377 | switch (ax)
|
| 1378 | {
|
| 1379 | case 0 : set_func("f_get_version_number"); break;
|
| 1380 | case 1 : set_func("f_add_type_code"); break;
|
| 1381 | case 2 : set_func("f_del_typc_code"); break;
|
| 1382 | case 3 : set_func("f_get_TCB"); break;
|
| 1383 | case 4 : set_func("f_add_driver_code"); break;
|
| 1384 | case 5 : set_func("f_del_driver_code"); break;
|
| 1385 | case 6 : set_func("f_get_DCB"); break;
|
| 1386 | case 7 : set_func("f_get_copyright"); break;
|
| 1387 | }
|
| 1388 | }; break;
|
| 1389 | |
| 1390 | case 1 : |
| 1391 | {
|
| 1392 | set_type("t_character");
|
| 1393 | set_drv("d_printer");
|
| 1394 | |
| 1395 | switch(ax)
|
| 1396 | {
|
| 1397 | case 0 : set_func("f_get_version_number"); break;
|
| 1398 | case 1 : set_func("f_get_output_status"); break;
|
| 1399 | case 2 : set_func("f_output_character"); break;
|
| 1400 | case 3 : set_func("f_get_input_status"); break;
|
| 1401 | case 4 : set_func("f_get_and_remove"); break;
|
| 1402 | case 5 : set_func("f_get_no_remove"); break;
|
| 1403 | case 6 : set_func("f_get_last_and_remove"); break;
|
| 1404 | case 7 : set_func("f_get_last_no_remove"); break;
|
| 1405 | case 8 : set_func("f_set_IO_parameters"); break;
|
| 1406 | }
|
| 1407 | }; break;
|
| 1408 | |
| 1409 | case 2 : |
| 1410 | {
|
| 1411 | set_type("t_disk");
|
| 1412 | |
| 1413 | switch(bx)
|
| 1414 | {
|
| 1415 | case 0 : set_drv("d_floppy"); break;
|
| 1416 | case 1 : set_drv("d_winchester"); break;
|
| 1417 | case 2 : set_drv("d_tape"); break;
|
| 1418 | case 3 : set_drv("d_rompack"); break;
|
| 1419 | case 4 : set_drv("d_eeprom"); break;
|
| 1420 | }
|
| 1421 | |
| 1422 | switch(ax)
|
| 1423 | {
|
| 1424 | case 0 : set_func("f_get_version_number"); break; |
| 1425 | case 1 : set_func("f_initialise_unit"); break;
|
| 1426 | case 2 : set_func("f_pseudo_init_unit"); break;
|
| 1427 | case 3 : set_func("f_get_device_status"); break;
|
| 1428 | case 4 : set_func("f_read_n_sectors"); break;
|
| 1429 | case 5 : set_func("f_write_n_sectors"); break;
|
| 1430 | case 6 : set_func("f_verify_n_sectors"); break;
|
| 1431 | case 7 : set_func("f_media_check"); break;
|
| 1432 | case 8 : set_func("f_recalibrate"); break;
|
| 1433 | case 9 : set_func("f_motors_off"); break;
|
| 1434 | }
|
| 1435 | |
| 1436 | }; break;
|
| 1437 | |
| 1438 | case 3 : |
| 1439 | {
|
| 1440 | set_type("t_piconet");
|
| 1441 | switch(ax)
|
| 1442 | {
|
| 1443 | case 0 : set_func("f_get_version_number"); break; |
| 1444 | }
|
| 1445 | }; break;
|
| 1446 | |
| 1447 | case 4 : |
| 1448 | {
|
| 1449 | set_type("t_tick");
|
| 1450 | set_drv("d_tick");
|
| 1451 | |
| 1452 | switch(ax)
|
| 1453 | {
|
| 1454 | case 0 : set_func("f_get_version_number"); break; |
| 1455 | case 1 : set_func("f_ticks_per_second"); break; |
| 1456 | case 2 : set_func("f_link_tick_routine"); break; |
| 1457 | case 3 : set_func("f_unlink_tick_routine"); break; |
| 1458 | }
|
| 1459 | }; break;
|
| 1460 | |
| 1461 | case 5 : |
| 1462 | {
|
| 1463 | set_type("t_graphics_input");
|
| 1464 | switch(ax)
|
| 1465 | {
|
| 1466 | case 0 : set_func("f_get_version_number"); break; |
| 1467 | }
|
| 1468 | }; break;
|
| 1469 | |
| 1470 | case 6 : |
| 1471 | {
|
| 1472 | set_type("t_graphics_output");
|
| 1473 | set_drv("d_ngc_screen");
|
| 1474 | |
| 1475 | switch(ax)
|
| 1476 | {
|
| 1477 | case 0 : set_func("f_get_version_number"); break; |
| 1478 | case 1 : set_func("f_graphics_output_cold_start"); break; |
| 1479 | case 2 : set_func("f_graphics_output_warm_start"); break; |
| 1480 | case 3 : set_func("f_graphics_output_off"); break; |
| 1481 | case 4 : set_func("f_reinit_graphics_output"); break; |
| 1482 | case 5 : set_func("f_polymarker"); break; |
| 1483 | case 6 : set_func("f_polyline"); break; |
| 1484 | case 7 : set_func("f_fill_area"); dump_dssi=&decode_dssi_f_fill_area; break; |
| 1485 | case 8 : set_func("f_flood_fill_area"); break; |
| 1486 | case 9 : set_func("f_plot_character_string"); dump_dssi=&decode_dssi_f_plot_character_string; break; |
| 1487 | case 10 : set_func("f_define_graphics_clipping_area"); break; |
| 1488 | case 11 : set_func("f_enquire_clipping_area_limits"); break; |
| 1489 | case 12 : set_func("f_select_graphics_clipping_area"); break; |
| 1490 | case 13 : set_func("f_enq_selctd_graphics_clip_area"); break; |
| 1491 | case 14 : set_func("f_set_clt_element"); break; |
| 1492 | case 15 : set_func("f_enquire_clt_element"); break; |
| 1493 | case 16 : set_func("f_set_new_clt"); dump_dssi=&decode_dssi_f_set_new_clt; break; |
| 1494 | case 17 : set_func("f_enquire_clt_contents"); break; |
| 1495 | case 18 : set_func("f_define_dithering_pattern"); break; |
| 1496 | case 19 : set_func("f_enquire_dithering_pattern"); break; |
| 1497 | case 20 : set_func("f_draw_sprite"); break; |
| 1498 | case 21 : set_func("f_move_sprite"); break; |
| 1499 | case 22 : set_func("f_erase_sprite"); break; |
| 1500 | case 23 : set_func("f_read_pixel"); break; |
| 1501 | case 24 : set_func("f_read_to_limit"); break; |
| 1502 | case 25 : set_func("f_read_area_pixel"); break; |
| 1503 | case 26 : set_func("f_write_area_pixel"); break; |
| 1504 | case 27 : set_func("f_copy_area_pixel"); break; |
| 1505 | |
| 1506 | case 29 : set_func("f_read_area_word"); break; |
| 1507 | case 30 : set_func("f_write_area_word"); break; |
| 1508 | case 31 : set_func("f_copy_area_word"); break; |
| 1509 | case 32 : set_func("f_swap_area_word"); break; |
| 1510 | case 33 : set_func("f_set_border_colour"); break; |
| 1511 | case 34 : set_func("f_enquire_border_colour"); break; |
| 1512 | case 35 : set_func("f_enquire_miscellaneous_data"); break; |
| 1513 | case 36 : set_func("f_circle"); break; |
| 1514 | |
| 1515 | case 38 : set_func("f_arc_of_ellipse"); break; |
| 1516 | case 39 : set_func("f_isin"); break; |
| 1517 | case 40 : set_func("f_icos"); break; |
| 1518 | case 41 : set_func("f_define_hatching_pattern"); break; |
| 1519 | case 42 : set_func("f_enquire_hatching_pattern"); break; |
| 1520 | case 43 : set_func("f_enquire_display_line"); break; |
| 1521 | case 44 : set_func("f_plonk_logo"); break; |
| 1522 | }
|
| 1523 | }; break;
|
| 1524 | |
| 1525 | case 7 : |
| 1526 | {
|
| 1527 | set_type("t_zend");
|
| 1528 | switch(ax)
|
| 1529 | {
|
| 1530 | case 0 : set_func("f_get_version_number"); break; |
| 1531 | }
|
| 1532 | }; break;
|
| 1533 | |
| 1534 | case 8 : |
| 1535 | {
|
| 1536 | set_type("t_zep");
|
| 1537 | switch(ax)
|
| 1538 | {
|
| 1539 | case 0 : set_func("f_get_version_number"); break; |
| 1540 | }
|
| 1541 | }; break;
|
| 1542 | |
| 1543 | case 9 : |
| 1544 | {
|
| 1545 | set_type("t_raw_console");
|
| 1546 | |
| 1547 | switch(bx)
|
| 1548 | {
|
| 1549 | case 0 : |
| 1550 | {
|
| 1551 | set_drv("d_screen");
|
| 1552 | |
| 1553 | switch(ax)
|
| 1554 | {
|
| 1555 | case 0 : set_func("f_get_version_number"); break; |
| 1556 | case 1 : set_func("f_plonk_char"); dump_dssi=decode_dssi_f_plonk_char; break;
|
| 1557 | case 2 : set_func("f_plonk_cursor"); break;
|
| 1558 | case 3 : set_func("f_kill_cursor"); break;
|
| 1559 | case 4 : set_func("f_scroll"); break;
|
| 1560 | case 5 : set_func("f_width"); break;
|
| 1561 | case 6 : set_func("f_get_char_set"); break;
|
| 1562 | case 7 : set_func("f_set_char_set"); break;
|
| 1563 | case 8 : set_func("f_reset_char_set"); break;
|
| 1564 | case 9 : set_func("f_set_plonk_parameters"); break;
|
| 1565 | case 10 : set_func("f_set_cursor_flash_rate"); break;
|
| 1566 | }
|
| 1567 | }; break;
|
| 1568 | |
| 1569 | case 1 :
|
| 1570 | {
|
| 1571 | set_drv("d_keyboard");
|
| 1572 | |
| 1573 | switch(ax)
|
| 1574 | {
|
| 1575 | case 0 : set_func("f_get_version_number"); break; |
| 1576 | case 1 : set_func("f_init_keyboard"); break;
|
| 1577 | case 2 : set_func("f_get_last_key_code"); break;
|
| 1578 | case 3 : set_func("f_get_bitmap"); break;
|
| 1579 | }
|
| 1580 | }; break;
|
| 1581 | }
|
| 1582 | }; break;
|
| 1583 | |
| 1584 | case 10 : |
| 1585 | {
|
| 1586 | set_type("t_acoustics");
|
| 1587 | switch(ax)
|
| 1588 | {
|
| 1589 | case 0 : set_func("f_get_version_number"); break; |
| 1590 | }
|
| 1591 | }; break;
|
| 1592 | |
| 1593 | case 11 : |
| 1594 | {
|
| 1595 | set_type("t_hard_sums");
|
| 1596 | switch(ax)
|
| 1597 | {
|
| 1598 | case 0 : set_func("f_get_version_number"); break; |
| 1599 | }
|
| 1600 | }; break; |
| 1601 | }
|
| 1602 | |
| 1603 | logerror("Type=%s, Driver=%s, Function=%s\n",type_str,drv_str,func_str);
|
| 1604 | |
| 1605 | if(dump_dssi!=NULL)
|
| 1606 | dump_dssi(device,ds,si);
|
| 1607 | logerror("=======================================================================\n");
|
| 1608 | }
|
| 1609 | |
| 1610 | void *get_dssi_ptr(const address_space *space, UINT16 ds, UINT16 si)
|
| 1611 | {
|
| 1612 | int addr;
|
| 1613 | |
| 1614 | addr=((ds<<4)+si);
|
| 1615 | OUTPUT_SEGOFS("DS:SI",ds,si);
|
| 1616 | |
| 1617 | return memory_get_read_ptr(space, addr);
|
| 1618 | }
|
| 1619 | |
| 1620 | static void decode_dssi_f_fill_area(const device_config *device,UINT16 ds, UINT16 si)
|
| 1621 | {
|
| 1622 | const address_space *space = cputag_get_address_space(device->machine,MAINCPU_TAG, ADDRESS_SPACE_PROGRAM);
|
| 1623 |
|
| 1624 | UINT16 *addr_ptr;
|
| 1625 | t_area_params *area_params;
|
| 1626 | t_nimbus_brush *brush;
|
| 1627 | int cocount;
|
| 1628 | |
| 1629 | area_params = get_dssi_ptr(space,ds,si);
|
| 1630 | |
| 1631 | OUTPUT_SEGOFS("SegBrush:OfsBrush",area_params->seg_brush,area_params->ofs_brush);
|
| 1632 | brush=memory_get_read_ptr(space, LINEAR_ADDR(area_params->seg_brush,area_params->ofs_brush));
|
| 1633 | |
| 1634 | logerror("Brush params\n");
|
| 1635 | logerror("Style=%04X, StyleIndex=%04X\n",brush->style,brush->style_index);
|
| 1636 | logerror("Colour1=%04X, Colour2=%04X\n",brush->colour1,brush->colour2);
|
| 1637 | logerror("transparency=%04X, boundry_spec=%04X\n",brush->transparency,brush->boundary_spec);
|
| 1638 | logerror("boundry colour=%04X, save colour=%04X\n",brush->boundary_colour,brush->save_colour);
|
| 1639 | |
| 1640 | |
| 1641 | OUTPUT_SEGOFS("SegData:OfsData",area_params->seg_data,area_params->ofs_data);
|
| 1642 | |
| 1643 | addr_ptr = memory_get_read_ptr(space, LINEAR_ADDR(area_params->seg_data,area_params->ofs_data));
|
| 1644 | for(cocount=0; cocount < area_params->count; cocount++)
|
| 1645 | {
|
| 1646 | logerror("x=%d y=%d\n",addr_ptr[cocount*2],addr_ptr[(cocount*2)+1]);
|
| 1647 | }
|
| 1648 | }
|
| 1649 | |
| 1650 | static void decode_dssi_f_plot_character_string(const device_config *device,UINT16 ds, UINT16 si)
|
| 1651 | {
|
| 1652 | const address_space *space = cputag_get_address_space(device->machine,MAINCPU_TAG, ADDRESS_SPACE_PROGRAM);
|
| 1653 |
|
| 1654 | UINT8 *char_ptr;
|
| 1655 | t_plot_string_params *plot_string_params;
|
| 1656 | int charno;
|
| 1657 |
|
| 1658 | plot_string_params=get_dssi_ptr(space,ds,si);
|
| 1659 | |
| 1660 | OUTPUT_SEGOFS("SegFont:OfsFont",plot_string_params->seg_font,plot_string_params->ofs_font);
|
| 1661 | OUTPUT_SEGOFS("SegData:OfsData",plot_string_params->seg_data,plot_string_params->ofs_data);
|
| 1662 | |
| 1663 | logerror("x=%d, y=%d, length=%d\n",plot_string_params->x,plot_string_params->y,plot_string_params->length);
|
| 1664 | |
| 1665 | char_ptr=memory_get_read_ptr(space, LINEAR_ADDR(plot_string_params->seg_data,plot_string_params->ofs_data));
|
| 1666 | |
| 1667 | if (plot_string_params->length==0xFFFF)
|
| 1668 | logerror("%s",char_ptr);
|
| 1669 | else
|
| 1670 | for(charno=0;charno<plot_string_params->length;charno++)
|
| 1671 | logerror("%c",char_ptr[charno]);
|
| 1672 | |
| 1673 | logerror("\n");
|
| 1674 | }
|
| 1675 | |
| 1676 | static void decode_dssi_f_set_new_clt(const device_config *device,UINT16 ds, UINT16 si)
|
| 1677 | {
|
| 1678 | const address_space *space = cputag_get_address_space(device->machine,MAINCPU_TAG, ADDRESS_SPACE_PROGRAM);
|
| 1679 | UINT16 *new_colours;
|
| 1680 | int colour;
|
| 1681 | new_colours=get_dssi_ptr(space,ds,si);
|
| 1682 | |
| 1683 | OUTPUT_SEGOFS("SegColours:OfsColours",ds,si);
|
| 1684 | |
| 1685 | for(colour=0;colour<16;colour++)
|
| 1686 | logerror("colour #%02X=%04X\n",colour,new_colours[colour]);
|
| 1687 | |
| 1688 | }
|
| 1689 | |
| 1690 | static void decode_dssi_f_plonk_char(const device_config *device,UINT16 ds, UINT16 si)
|
| 1691 | {
|
| 1692 | const address_space *space = cputag_get_address_space(device->machine,MAINCPU_TAG, ADDRESS_SPACE_PROGRAM);
|
| 1693 | UINT16 *params;
|
| 1694 | params=get_dssi_ptr(space,ds,si);
|
| 1695 | |
| 1696 | OUTPUT_SEGOFS("SegParams:OfsParams",ds,si);
|
| 1697 | |
| 1698 | logerror("plonked_char=%c\n",params[0]);
|
| 1699 | }
|
| 1700 | |
| 1701 | |
| 1702 | READ16_HANDLER( nimbus_io_r )
|
| 1703 | {
|
| 1704 | int pc=cpu_get_pc(space->cpu);
|
| 1705 | |
| 1706 | logerror("Nimbus IOR at pc=%08X from %04X mask=%04X, data=%04X\n",pc,(offset*2)+0x30,mem_mask,IOPorts[offset]);
|
| 1707 | |
| 1708 | switch (offset*2)
|
| 1709 | {
|
| 1710 | default : return IOPorts[offset]; break;
|
| 1711 | }
|
| 1712 | return 0;
|
| 1713 | }
|
| 1714 | |
| 1715 | WRITE16_HANDLER( nimbus_io_w )
|
| 1716 | {
|
| 1717 | int pc=cpu_get_pc(space->cpu);
|
| 1718 | |
| 1719 | logerror("Nimbus IOW at %08X write of %04X to %04X mask=%04X\n",pc,data,(offset*2)+0x30,mem_mask);
|
| 1720 | |
| 1721 | switch (offset*2)
|
| 1722 | {
|
| 1723 | default : COMBINE_DATA(&IOPorts[offset]); break;
|
| 1724 | }
|
| 1725 | }
|
| 1726 | |
| 1727 | |
| 1728 | /* |
| 1729 | Keyboard emulation |
| 1730 | |
| 1731 | */
|
| 1732 | |
| 1733 | static void keyboard_reset(void)
|
| 1734 | {
|
| 1735 | memset(keyboard.keyrows,0xFF,NIMBUS_KEYROWS);
|
| 1736 | |
| 1737 | // Setup timer to scan keyboard.
|
| 1738 | timer_adjust_periodic(keyboard.keyscan_timer, attotime_zero, 0, ATTOTIME_IN_HZ(50));
|
| 1739 | |
| 1740 | }
|
| 1741 | |
| 1742 | static void queue_scancode(UINT8 scancode)
|
| 1743 | {
|
| 1744 | keyboard.queue[keyboard.head] = scancode;
|
| 1745 | keyboard.head++;
|
| 1746 | keyboard.head %= ARRAY_LENGTH(keyboard.queue);
|
| 1747 | }
|
| 1748 | |
| 1749 | static int keyboard_queue_read(void)
|
| 1750 | {
|
| 1751 | int data;
|
| 1752 | if (keyboard.tail == keyboard.head)
|
| 1753 | return -1;
|
| 1754 | |
| 1755 | data = keyboard.queue[keyboard.tail];
|
| 1756 | |
| 1757 | if (LOG_KEYBOARD)
|
| 1758 | logerror("keyboard_queue_read(): Keyboard Read 0x%02x\n",data);
|
| 1759 | |
| 1760 | keyboard.tail++;
|
| 1761 | keyboard.tail %= ARRAY_LENGTH(keyboard.queue);
|
| 1762 | return data;
|
| 1763 | }
|
| 1764 | |
| 1765 | static TIMER_CALLBACK(keyscan_callback)
|
| 1766 | {
|
| 1767 | UINT8 keyrow;
|
| 1768 | UINT8 row;
|
| 1769 | UINT8 bitno;
|
| 1770 | UINT8 mask;
|
| 1771 | static const char *const keynames[] = { "KEY0", "KEY1", "KEY2", "KEY3", "KEY4",
|
| 1772 | "KEY5", "KEY6", "KEY7", "KEY8", "KEY9", |
| 1773 | "KEY10"};
|
| 1774 | |
| 1775 | for(row=0;row<NIMBUS_KEYROWS;row++)
|
| 1776 | {
|
| 1777 | keyrow=input_port_read(machine, keynames[row]);
|
| 1778 | |
| 1779 | for(mask=0x80, bitno=7;mask>0;mask=mask>>1, bitno-=1)
|
| 1780 | {
|
| 1781 | if(!(keyrow & mask) && (keyboard.keyrows[row] & mask))
|
| 1782 | {
|
| 1783 | if (LOG_KEYBOARD) logerror("keypress %02X\n",(row<<3)+bitno);
|
| 1784 | queue_scancode((row<<3)+bitno);
|
| 1785 | }
|
| 1786 |
|
| 1787 | if((keyrow & mask) && !(keyboard.keyrows[row] & mask))
|
| 1788 | {
|
| 1789 | if (LOG_KEYBOARD) logerror("keyrelease %02X\n",0x80+(row<<3)+bitno); |
| 1790 | queue_scancode(0x80+(row<<3)+bitno);
|
| 1791 | }
|
| 1792 | }
|
| 1793 | |
| 1794 | keyboard.keyrows[row]=keyrow;
|
| 1795 | }
|
| 1796 | }
|
| 1797 | |
| 1798 | |
| 1799 | /* |
| 1800 | |
| 1801 | Z80SIO, used for the keyboard interface |
| 1802 | |
| 1803 | */
|
| 1804 | |
| 1805 | READ8_DEVICE_HANDLER( sio_r )
|
| 1806 | {
|
| 1807 | int pc=cpu_get_pc(cputag_get_cpu(device->machine,MAINCPU_TAG));
|
| 1808 | UINT8 result = 0;
|
| 1809 | |
| 1810 | switch (offset*2)
|
| 1811 | {
|
| 1812 | case 0 :
|
| 1813 | result=z80sio_d_r(device, 0); |
| 1814 | break;
|
| 1815 | case 2 :
|
| 1816 | result=z80sio_d_r(device, 1); |
| 1817 | break;
|
| 1818 | case 4 :
|
| 1819 | result=z80sio_c_r(device, 0);
|
| 1820 | break;
|
| 1821 | case 6 :
|
| 1822 | result=z80sio_c_r(device, 1);
|
| 1823 | break;
|
| 1824 | }
|
| 1825 | |
| 1826 | if(LOG_SIO)
|
| 1827 | logerror("Nimbus SIOR at pc=%08X from %04X data=%02X\n",pc,(offset*2)+0xF0,result);
|
| 1828 | |
| 1829 | return result;
|
| 1830 | }
|
| 1831 | |
| 1832 | WRITE8_DEVICE_HANDLER( sio_w )
|
| 1833 | {
|
| 1834 | int pc=cpu_get_pc(cputag_get_cpu(device->machine,MAINCPU_TAG));
|
| 1835 | |
| 1836 | if(LOG_SIO)
|
| 1837 | logerror("Nimbus SIOW at %08X write of %02X to %04X\n",pc,data,(offset*2)+0xF0);
|
| 1838 | |
| 1839 | switch (offset*2)
|
| 1840 | {
|
| 1841 | case 0 :
|
| 1842 | z80sio_d_w(device, 0, data);
|
| 1843 | break;
|
| 1844 | case 2 :
|
| 1845 | z80sio_d_w(device, 1, data);
|
| 1846 | break;
|
| 1847 | case 4 :
|
| 1848 | z80sio_c_w(device, 0, data);
|
| 1849 | break;
|
| 1850 | case 5 :
|
| 1851 | z80sio_c_w(device, 1, data);
|
| 1852 | break;
|
| 1853 | }
|
| 1854 | }
|
| 1855 | |
| 1856 | /* Z80 SIO/2 */
|
| 1857 | |
| 1858 | void sio_interrupt(const device_config *device, int state)
|
| 1859 | {
|
| 1860 | if(LOG_SIO)
|
| 1861 | logerror("SIO Interrupt state=%02X\n",state);
|
| 1862 | |
| 1863 | // Don't re-trigger if already active !
|
| 1864 | if(state!=sio_int_state)
|
| 1865 | {
|
| 1866 | sio_int_state=state;
|
| 1867 | |
| 1868 | if(state)
|
| 1869 | external_int(device->machine,0,0x9C);
|
| 1870 | }
|
| 1871 | }
|
| 1872 | |
| 1873 | WRITE8_DEVICE_HANDLER( sio_dtr_w )
|
| 1874 | {
|
| 1875 | if (offset == 1)
|
| 1876 | {
|
| 1877 | }
|
| 1878 | }
|
| 1879 | |
| 1880 | WRITE8_DEVICE_HANDLER( sio_serial_transmit )
|
| 1881 | {
|
| 1882 | }
|
| 1883 | |
| 1884 | int sio_serial_receive( const device_config *device, int channel )
|
| 1885 | {
|
| 1886 | if(channel==0)
|
| 1887 | {
|
| 1888 | return keyboard_queue_read(); |
| 1889 | }
|
| 1890 | else
|
| 1891 | return -1;
|
| 1892 | }
|
| 1893 | |
| 1894 | /* Floppy disk */
|
| 1895 | |
| 1896 | static void fdc_reset(void)
|
| 1897 | {
|
| 1898 | nimbus_fdc.irq_enabled=0;
|
| 1899 | nimbus_fdc.drq_enabled=0;
|
| 1900 | nimbus_fdc.diskno=0;
|
| 1901 | nimbus_fdc.motor_on=0;
|
| 1902 | }
|
| 1903 | |
| 1904 | static WRITE_LINE_DEVICE_HANDLER( nimbus_fdc_intrq_w )
|
| 1905 | {
|
| 1906 | if(LOG_DISK)
|
| 1907 | logerror("nimbus_fdc_intrq_w(%d)\n", state);
|
| 1908 | |
| 1909 | if(state && nimbus_fdc.irq_enabled)
|
| 1910 | {
|
| 1911 | external_int(device->machine,0,0x80);
|
| 1912 | } |
| 1913 | }
|
| 1914 | |
| 1915 | static WRITE_LINE_DEVICE_HANDLER( nimbus_fdc_drq_w )
|
| 1916 | {
|
| 1917 | |
| 1918 | if(LOG_DISK)
|
| 1919 | logerror("nimbus_fdc_drq_w(%d)\n", state);
|
| 1920 | |
| 1921 | if(state && nimbus_fdc.drq_enabled)
|
| 1922 | drq_callback(device->machine,1);
|
| 1923 | }
|
| 1924 | |
| 1925 | READ8_HANDLER( nimbus_fdc_r )
|
| 1926 | {
|
| 1927 | int result = 0;
|
| 1928 | const device_config *fdc = devtag_get_device(space->machine, FDC_TAG);
|
| 1929 | int pc=cpu_get_pc(space->cpu);
|
| 1930 | const device_config *drive = devtag_get_device(space->machine, nimbus_wd17xx_interface.floppy_drive_tags[nimbus_fdc.diskno]);
|
| 1931 |
|
| 1932 | switch(offset*2)
|
| 1933 | {
|
| 1934 | case 0x08 :
|
| 1935 | result = wd17xx_status_r(fdc, 0);
|
| 1936 | if (LOG_DISK) logerror("Disk status=%2.2X\n",result);
|
| 1937 | break;
|
| 1938 | case 0x0A :
|
| 1939 | result = wd17xx_track_r(fdc, 0);
|
| 1940 | break;
|
| 1941 | case 0x0C :
|
| 1942 | result = wd17xx_sector_r(fdc, 0);
|
| 1943 | break;
|
| 1944 | case 0x0E :
|
| 1945 | result = wd17xx_data_r(fdc, 0);
|
| 1946 | break;
|
| 1947 | case 0x10 :
|
| 1948 | result = (nimbus_fdc.motor_on ? 0x04 : 0x00) |
|
| 1949 | (floppy_drive_get_flag_state(drive, FLOPPY_DRIVE_INDEX) ? 0x00 : 0x02) |
|
| 1950 | (floppy_drive_get_flag_state(drive, FLOPPY_DRIVE_READY) ? 0x01 : 0x00); |
| 1951 | break;
|
| 1952 | default:
|
| 1953 | break;
|
| 1954 | }
|
| 1955 | |
| 1956 | if(LOG_DISK)
|
| 1957 | logerror("Nimbus FDCR at pc=%08X from %04X data=%02X\n",pc,(offset*2)+0x400,result);
|
| 1958 | |
| 1959 | return result;
|
| 1960 | }
|
| 1961 | |
| 1962 | WRITE8_HANDLER( nimbus_fdc_w )
|
| 1963 | {
|
| 1964 | const device_config *fdc = devtag_get_device(space->machine, FDC_TAG);
|
| 1965 | int pc=cpu_get_pc(space->cpu);
|
| 1966 | |
| 1967 | if(LOG_DISK)
|
| 1968 | logerror("Nimbus FDCW at %08X write of %02X to %04X\n",pc,data,(offset*2)+0x400);
|
| 1969 | |
| 1970 | switch(offset*2)
|
| 1971 | {
|
| 1972 | case 0x00 :
|
| 1973 | switch (data & 0x0F)
|
| 1974 | {
|
| 1975 | case 0x01 : nimbus_fdc.diskno=0; break;
|
| 1976 | case 0x02 : nimbus_fdc.diskno=1; break;
|
| 1977 | case 0x04 : nimbus_fdc.diskno=2; break;
|
| 1978 | case 0x08 : nimbus_fdc.diskno=3; break; |
| 1979 | //default : nimbus_fdc.diskno=NO_DRIVE_SELECTED; break; // no drive selected
|
| 1980 | }
|
| 1981 | if (nimbus_fdc.diskno!=NO_DRIVE_SELECTED)
|
| 1982 | {
|
| 1983 | wd17xx_set_drive(fdc, nimbus_fdc.diskno);
|
| 1984 | wd17xx_set_side(fdc, (data & 0x10) ? 1 : 0);
|
| 1985 | }
|
| 1986 | nimbus_fdc.motor_on=(data & 0x20);
|
| 1987 | nimbus_fdc.drq_enabled=(data & 0x80);
|
| 1988 | nimbus_fdc.irq_enabled=1;
|
| 1989 | |
| 1990 | // Nimbus FDC is hard wired for double density
|
| 1991 | wd17xx_set_density(fdc, DEN_MFM_LO);
|
| 1992 | break;
|
| 1993 | case 0x08 :
|
| 1994 | wd17xx_command_w(fdc, 0, data);
|
| 1995 | break;
|
| 1996 | case 0x0A :
|
| 1997 | wd17xx_track_w(fdc, 0, data);
|
| 1998 | break;
|
| 1999 | case 0x0C :
|
| 2000 | wd17xx_sector_w(fdc, 0, data);
|
| 2001 | break;
|
| 2002 | case 0x0E :
|
| 2003 | wd17xx_data_w(fdc, 0, data);
|
| 2004 | break;
|
| 2005 | }
|
| 2006 | }
|
| 2007 | |