Previous 15994 Revisions Next

r4477 Friday 10th April, 2009 at 20:35:43 UTC by Fabio Priuli
[COLECO] Converted extra controller selection to use PORT_CATEGORY.
Fixed Super Action Controller emulation (it was missing additional
action buttons and P2 slider)
[docs]messnew.txt
[src/mess/drivers]coleco.c

src/mess/drivers/coleco.c
r4476r4477
1/***************************************************************************
1/*******************************************************************************************************
22
33  coleco.c
44
r4476r4477
1111  Sean Young
1212
1313  NEWS:
14    - Modified memory map, now it has only 1k of RAM mapped on 8k Slot
15    - Modified I/O map, now it is handled as on a real ColecoVision:
14   - Modified memory map, now it has only 1k of RAM mapped on 8k Slot
15   - Modified I/O map, now it is handled as on a real ColecoVision:
1616        The I/O map is broken into 4 write and 4 read ports:
1717            80-9F (W) = Set both controllers to keypad mode
1818            80-9F (R) = Not Connected
r4476r4477
2626            E0-FF (W) = Sound Chip (SN76489A)
2727            E0-FF (R) = Read Controller data, A1=0 -> read controller 1, A1=1 -> read controller 2
2828
29    - Modified paddle handler, now it is handled as on a real ColecoVision
30    - Added support for a Driving Controller (Expansion Module #2), enabled via configuration
31    - Added support for a Roller Controller (Trackball), enabled via configuration
32    - Added support for two Super Action Controller, enabled via configuracion
29   - Modified paddle handler, now it is handled as on a real ColecoVision
30   - Added support for a Driving Controller (Expansion Module #2), enabled via category
31   - Added support for a Roller Controller (Trackball), enabled via category
32   - Added support for two Super Action Controller, enabled via category
3333
3434    EXTRA CONTROLLERS INFO:
3535
36        -Driving Controller (Expansion Module #2). It consist of a steering wheel and a gas pedal. Only one
37         can be used on a real ColecoVision. The gas pedal is not analog, internally it is just a switch.
38         On a real ColecoVision, when the Driving Controller is enabled, the controller 1 do not work because
39         have been replaced by the Driving Controller, and controller 2 have to be used to start game, gear
40         shift, etc.
41         Driving Controller is just a spinner on controller 1 socket similar to the one on Roller Controller
42         and Super Action Controllers so you can use Roller Controller or Super Action Controllers to play
43         games requiring Driving Controller.
36   -Driving Controller (Expansion Module #2). It consist of a steering wheel and a gas pedal. Only one
37   can be used on a real ColecoVision. The gas pedal is not analog, internally it is just a switch.
38   On a real ColecoVision, when the Driving Controller is enabled, the controller 1 do not work because
39   have been replaced by the Driving Controller, and controller 2 have to be used to start game, gear
40   shift, etc.
41   Driving Controller is just a spinner on controller 1 socket similar to the one on Roller Controller
42   and Super Action Controllers so you can use Roller Controller or Super Action Controllers to play
43   games requiring Driving Controller.
4444
45        -Roller Controller. Basically a trackball with four buttons (the two fire buttons from player 1 and
46         the two fire buttons from player 2). Only one Roller Controller can be used on a real ColecoVision.
47     Roller Controller is connected to both controller sockets and both controllers are conected to the Roller
48     Controller, it uses the spinner pins of both sockets to generate the X and Y signals (X from controller 1
49     and the Y from controller 2)
45   -Roller Controller. Basically a trackball with four buttons (the two fire buttons from player 1 and
46   the two fire buttons from player 2). Only one Roller Controller can be used on a real ColecoVision.
47   Roller Controller is connected to both controller sockets and both controllers are conected to the Roller
48   Controller, it uses the spinner pins of both sockets to generate the X and Y signals (X from controller 1
49   and the Y from controller 2)
5050
51        -Super Action Controllers. It is a hand controller with a keypad, four buttons (the two from
52         the player pad and two more), and a spinner. This was made primarily for two player sport games, but
53         will work for every other ColecoVision game.
51   -Super Action Controllers. It is a hand controller with a keypad, four buttons (the two from
52   the player pad and two more), and a spinner. This was made primarily for two player sport games, but
53   will work for every other ColecoVision game.
5454
55***************************************************************************/
55*******************************************************************************************************/
5656
5757/*
5858
r4476r4477
7575
7676static READ8_HANDLER( paddle_1_r )
7777{
78   UINT8 inport6 = input_port_read_safe(space->machine, "IN6", 0);
78   UINT8 ctrl_sel = input_port_read_safe(space->machine, "CTRLSEL", 0);
7979
80   /* Keypad and fire 1 (SAC Yellow Button) */
81   if (joy_mode==0)
80   /* is there a controller connected to port1? */
81   if ((ctrl_sel & 0x07) != 0x01 )
8282   {
83      UINT8 inport0 = input_port_read(space->machine, "IN0");
84      UINT8 inport1 = input_port_read(space->machine, "IN1");
83      /* Keypad and fire 1 (SAC Yellow Button) */
84      if (joy_mode == 0)
85      {
86         UINT8 data = 0x0f;   /* No key pressed by default */
87         UINT16 ipt1 = 0x00;
8588
86      /* Numeric pad buttons are not independent on a real ColecoVision, if you push more
87      than one, a real ColecoVision think that it is a third button, so we are going to emulate
88      the right behaviour */
89         if ((ctrl_sel & 0x07) == 0x00)         // colecovision controller
90            ipt1 = input_port_read(space->machine, "KEYPAD1");
91         else if ((ctrl_sel & 0x07) == 0x02)      // super action controller controller
92            ipt1 = input_port_read(space->machine, "SAC_KPD1");
8993
90      UINT8 data = 0x0F;   /* No key pressed by default */
94         /* Numeric pad buttons are not independent on a real ColecoVision, if you push more
95         than one, a real ColecoVision think that it is a third button, so we are going to emulate
96         the right behaviour */
97         /* Super Action Controller additional buttons are read in the same way */
98         if ((ctrl_sel & 0x07) != 0x03) /* If Driving Controller enabled -> no keypad 1*/
99         {
100            if (!(ipt1 & 0x0001)) data &= 0x0a; /* 0 */
101            if (!(ipt1 & 0x0002)) data &= 0x0d; /* 1 */
102            if (!(ipt1 & 0x0004)) data &= 0x07; /* 2 */
103            if (!(ipt1 & 0x0008)) data &= 0x0c; /* 3 */
104            if (!(ipt1 & 0x0010)) data &= 0x02; /* 4 */
105            if (!(ipt1 & 0x0020)) data &= 0x03; /* 5 */
106            if (!(ipt1 & 0x0040)) data &= 0x0e; /* 6 */
107            if (!(ipt1 & 0x0080)) data &= 0x05; /* 7 */
108            if (!(ipt1 & 0x0100)) data &= 0x01; /* 8 */
109            if (!(ipt1 & 0x0200)) data &= 0x0b; /* 9 */
110            if (!(ipt1 & 0x0400)) data &= 0x06; /* # */
111            if (!(ipt1 & 0x0800)) data &= 0x09; /* . */
112            if (!(ipt1 & 0x1000)) data &= 0x04; /* Blue Action Button */
113            if (!(ipt1 & 0x2000)) data &= 0x08; /* Purple Action Button */
114         }
91115
92      if (!(inport6 & 0x01)) /* If Driving Controller enabled -> no keypad 1*/
116         return ((ipt1 & 0x4000) >> 2) | 0x30 | (data);
117      }
118      /* Joystick and fire 2 (SAC Red Button) */
119      else
93120      {
94          if (!(inport0 & 0x01)) data &= 0x0A; /* 0 */
95          if (!(inport0 & 0x02)) data &= 0x0D; /* 1 */
96          if (!(inport0 & 0x04)) data &= 0x07; /* 2 */
97          if (!(inport0 & 0x08)) data &= 0x0C; /* 3 */
98          if (!(inport0 & 0x10)) data &= 0x02; /* 4 */
99          if (!(inport0 & 0x20)) data &= 0x03; /* 5 */
100          if (!(inport0 & 0x40)) data &= 0x0E; /* 6 */
101          if (!(inport0 & 0x80)) data &= 0x05; /* 7 */
102          if (!(inport1 & 0x01)) data &= 0x01; /* 8 */
103          if (!(inport1 & 0x02)) data &= 0x0B; /* 9 */
104          if (!(inport1 & 0x04)) data &= 0x06; /* # */
105          if (!(inport1 & 0x08)) data &= 0x09; /* . */
121         UINT8 data = 0x0f;
122
123         if ((ctrl_sel & 0x07) == 0x00)         // colecovision controller
124            data = input_port_read(space->machine, "JOY1") & 0xcf;
125         else if ((ctrl_sel & 0x07) == 0x02)      // super action controller controller
126            data = input_port_read(space->machine, "SAC_JOY1") & 0xcf;
127
128          /* If any extra contoller enabled */
129         if ((ctrl_sel & 0x80) || ((ctrl_sel & 0x07) == 0x02) || ((ctrl_sel & 0x07) == 0x03))
130         {
131            if (joy_status[0] == 0) data |= 0x30; /* Spinner Move Left*/
132            else if (joy_status[0] == 1) data |= 0x20; /* Spinner Move Right */
133         }
134
135         return data | 0x80;
106136      }
107      return (inport1 & 0x70) | (data);
108137   }
109   /* Joystick and fire 2 (SAC Red Button) */
110   else
111   {
112      UINT8 data = input_port_read(space->machine, "IN2") & 0xCF;
113138
114      if (inport6 & 0x07) /* If Extra Contollers enabled */
115      {
116          if (joy_status[0] == 0) data |= 0x30; /* Spinner Move Left*/
117          else if (joy_status[0] == 1) data |= 0x20; /* Spinner Move Right */
118      }
119
120      return data | 0x80;
121   }
139   return 0x0f;
122140}
123141
124142static READ8_HANDLER( paddle_2_r )
125143{
126   /* Keypad and fire 1 */
127   if (joy_mode == 0)
144   UINT8 ctrl_sel = input_port_read_safe(space->machine, "CTRLSEL", 0);
145
146   /* is there a controller connected to port2? */
147   if ((ctrl_sel & 0x70) != 0x10 )
128148   {
129      UINT8 inport3 = input_port_read(space->machine, "IN3");
130      UINT8 inport4 = input_port_read(space->machine, "IN4");
149      /* Keypad and fire 1 */
150      if (joy_mode == 0)
151      {
152         UINT8 data = 0x0f;   /* No key pressed by default */
153         UINT16 ipt2 = 0x00;
131154
132      /* Numeric pad buttons are not independent on a real ColecoVision, if you push more
133      than one, a real ColecoVision think that it is a third button, so we are going to emulate
134      the right behaviour */
155         if ((ctrl_sel & 0x70) == 0x00)         // colecovision controller
156            ipt2 = input_port_read(space->machine, "KEYPAD2");
157         else if ((ctrl_sel & 0x70) == 0x20)      // super action controller controller
158            ipt2 = input_port_read(space->machine, "SAC_KPD2");
135159
136      UINT8 data = 0x0F;   /* No key pressed by default */
160         /* Numeric pad buttons are not independent on a real ColecoVision, if you push more
161         than one, a real ColecoVision think that it is a third button, so we are going to emulate
162         the right behaviour */
163         /* Super Action Controller additional buttons are read in the same way */
164         if (!(ipt2 & 0x0001)) data &= 0x0a; /* 0 */
165         if (!(ipt2 & 0x0002)) data &= 0x0d; /* 1 */
166         if (!(ipt2 & 0x0004)) data &= 0x07; /* 2 */
167         if (!(ipt2 & 0x0008)) data &= 0x0c; /* 3 */
168         if (!(ipt2 & 0x0010)) data &= 0x02; /* 4 */
169         if (!(ipt2 & 0x0020)) data &= 0x03; /* 5 */
170         if (!(ipt2 & 0x0040)) data &= 0x0e; /* 6 */
171         if (!(ipt2 & 0x0080)) data &= 0x05; /* 7 */
172         if (!(ipt2 & 0x0100)) data &= 0x01; /* 8 */
173         if (!(ipt2 & 0x0200)) data &= 0x0b; /* 9 */
174         if (!(ipt2 & 0x0400)) data &= 0x06; /* # */
175         if (!(ipt2 & 0x0800)) data &= 0x09; /* . */
176         if (!(ipt2 & 0x1000)) data &= 0x04; /* Blue Action Button */
177         if (!(ipt2 & 0x2000)) data &= 0x08; /* Purple Action Button */
137178
138      if (!(inport3 & 0x01)) data &= 0x0A; /* 0 */
139      if (!(inport3 & 0x02)) data &= 0x0D; /* 1 */
140      if (!(inport3 & 0x04)) data &= 0x07; /* 2 */
141      if (!(inport3 & 0x08)) data &= 0x0C; /* 3 */
142      if (!(inport3 & 0x10)) data &= 0x02; /* 4 */
143      if (!(inport3 & 0x20)) data &= 0x03; /* 5 */
144      if (!(inport3 & 0x40)) data &= 0x0E; /* 6 */
145      if (!(inport3 & 0x80)) data &= 0x05; /* 7 */
146      if (!(inport4 & 0x01)) data &= 0x01; /* 8 */
147      if (!(inport4 & 0x02)) data &= 0x0B; /* 9 */
148      if (!(inport4 & 0x04)) data &= 0x06; /* # */
149      if (!(inport4 & 0x08)) data &= 0x09; /* . */
179         return ((ipt2 & 0x4000) >> 2) | 0x30 | (data);
180      }
181      /* Joystick and fire 2*/
182      else
183      {
184         UINT8 data = 0x0f;
150185
151      return (inport4 & 0x70) | (data);
152   }
153   /* Joystick and fire 2*/
154   else
155   {
156      UINT8 data = input_port_read(space->machine, "IN5") & 0xCF;
157      UINT8 inport6 = input_port_read_safe(space->machine, "IN6", 0);
186         if ((ctrl_sel & 0x70) == 0x00)         // colecovision controller
187            data = input_port_read(space->machine, "JOY2") & 0xcf;
188         else if ((ctrl_sel & 0x70) == 0x20)      // super action controller controller
189            data = input_port_read(space->machine, "SAC_JOY2") & 0xcf;
158190
159      if (inport6 & 0x02) /* If Roller Controller enabled */
160      {
161          if (joy_status[1] == 0) data |= 0x30;
162          else if (joy_status[1] == 1) data |= 0x20;
191         /* If Roller Controller or P2 Super Action Controller enabled */
192         if ((ctrl_sel & 0x80) || ((ctrl_sel & 0x70) == 0x20))
193         {
194            if (joy_status[1] == 0) data |= 0x30;
195            else if (joy_status[1] == 1) data |= 0x20;
196         }
197
198         return data | 0x80;
163199      }
200   }
164201
165      return data | 0x80;
166   }
202   return 0x0f;
167203}
168204
169205static WRITE8_HANDLER( paddle_off_w )
r4476r4477
214250
215251/* Input Ports */
216252
217static INPUT_PORTS_START( coleco )
218    PORT_START("IN0")
219    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0 (pad 1)") PORT_CODE(KEYCODE_0)
220    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1 (pad 1)") PORT_CODE(KEYCODE_1)
221    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2 (pad 1)") PORT_CODE(KEYCODE_2)
222    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3 (pad 1)") PORT_CODE(KEYCODE_3)
223    PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4 (pad 1)") PORT_CODE(KEYCODE_4)
224    PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5 (pad 1)") PORT_CODE(KEYCODE_5)
225    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6 (pad 1)") PORT_CODE(KEYCODE_6)
226    PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7 (pad 1)") PORT_CODE(KEYCODE_7)
253static INPUT_PORTS_START( ctrl1 )
254   PORT_START("KEYPAD1")
255   PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0 (pad 1)") PORT_CODE(KEYCODE_0) PORT_CATEGORY(1)
256   PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1 (pad 1)") PORT_CODE(KEYCODE_1) PORT_CATEGORY(1)
257   PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2 (pad 1)") PORT_CODE(KEYCODE_2) PORT_CATEGORY(1)
258   PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3 (pad 1)") PORT_CODE(KEYCODE_3) PORT_CATEGORY(1)
259   PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4 (pad 1)") PORT_CODE(KEYCODE_4) PORT_CATEGORY(1)
260   PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5 (pad 1)") PORT_CODE(KEYCODE_5) PORT_CATEGORY(1)
261   PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6 (pad 1)") PORT_CODE(KEYCODE_6) PORT_CATEGORY(1)
262   PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7 (pad 1)") PORT_CODE(KEYCODE_7) PORT_CATEGORY(1)
263   PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8 (pad 1)") PORT_CODE(KEYCODE_8) PORT_CATEGORY(1)
264   PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9 (pad 1)") PORT_CODE(KEYCODE_9) PORT_CATEGORY(1)
265   PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("# (pad 1)") PORT_CODE(KEYCODE_MINUS) PORT_CATEGORY(1)
266   PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(". (pad 1)") PORT_CODE(KEYCODE_EQUALS) PORT_CATEGORY(1)
267   PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_BUTTON2 )         PORT_PLAYER(1) PORT_CATEGORY(1)
268   PORT_BIT( 0xb000, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_CATEGORY(1)
227269
228    PORT_START("IN1")
229    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8 (pad 1)") PORT_CODE(KEYCODE_8)
230    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9 (pad 1)") PORT_CODE(KEYCODE_9)
231    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("# (pad 1)") PORT_CODE(KEYCODE_MINUS)
232    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(". (pad 1)") PORT_CODE(KEYCODE_EQUALS)
233    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 )
234    PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
270   PORT_START("JOY1")
271   PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )      PORT_PLAYER(1) PORT_CATEGORY(1)
272   PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )      PORT_PLAYER(1) PORT_CATEGORY(1)
273   PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )      PORT_PLAYER(1) PORT_CATEGORY(1)
274   PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )      PORT_PLAYER(1) PORT_CATEGORY(1)
275   PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 )         PORT_PLAYER(1) PORT_CATEGORY(1)
276   PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_CATEGORY(1)
277INPUT_PORTS_END
235278
236    PORT_START("IN2")
237    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )
238    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )
239    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )
240    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )
241    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 )
242    PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
279static INPUT_PORTS_START( ctrl2 )
280   PORT_START("KEYPAD2")
281   PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0 (pad 2)") PORT_CODE(KEYCODE_0_PAD) PORT_CATEGORY(2)
282   PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1 (pad 2)") PORT_CODE(KEYCODE_1_PAD) PORT_CATEGORY(2)
283   PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2 (pad 2)") PORT_CODE(KEYCODE_2_PAD) PORT_CATEGORY(2)
284   PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3 (pad 2)") PORT_CODE(KEYCODE_3_PAD) PORT_CATEGORY(2)
285   PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4 (pad 2)") PORT_CODE(KEYCODE_4_PAD) PORT_CATEGORY(2)
286   PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5 (pad 2)") PORT_CODE(KEYCODE_5_PAD) PORT_CATEGORY(2)
287   PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6 (pad 2)") PORT_CODE(KEYCODE_6_PAD) PORT_CATEGORY(2)
288   PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7 (pad 2)") PORT_CODE(KEYCODE_7_PAD) PORT_CATEGORY(2)
289   PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8 (pad 2)") PORT_CODE(KEYCODE_8_PAD) PORT_CATEGORY(2)
290   PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9 (pad 2)") PORT_CODE(KEYCODE_9_PAD) PORT_CATEGORY(2)
291   PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("# (pad 2)") PORT_CODE(KEYCODE_MINUS_PAD) PORT_CATEGORY(2)
292   PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(". (pad 2)") PORT_CODE(KEYCODE_PLUS_PAD) PORT_CATEGORY(2)
293   PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_BUTTON2 )      PORT_PLAYER(2) PORT_CATEGORY(2)
294   PORT_BIT( 0xb000, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_CATEGORY(2)
243295
244    PORT_START("IN3")
245    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0 (pad 2)") PORT_CODE(KEYCODE_0_PAD)
246    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1 (pad 2)") PORT_CODE(KEYCODE_1_PAD)
247    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2 (pad 2)") PORT_CODE(KEYCODE_2_PAD)
248    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3 (pad 2)") PORT_CODE(KEYCODE_3_PAD)
249    PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4 (pad 2)") PORT_CODE(KEYCODE_4_PAD)
250    PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5 (pad 2)") PORT_CODE(KEYCODE_5_PAD)
251    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6 (pad 2)") PORT_CODE(KEYCODE_6_PAD)
252    PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7 (pad 2)") PORT_CODE(KEYCODE_7_PAD)
296   PORT_START("JOY2")
297   PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )   PORT_PLAYER(2) PORT_CATEGORY(2)
298   PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )   PORT_PLAYER(2) PORT_CATEGORY(2)
299   PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )   PORT_PLAYER(2) PORT_CATEGORY(2)
300   PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )   PORT_PLAYER(2) PORT_CATEGORY(2)
301   PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 )      PORT_PLAYER(2) PORT_CATEGORY(2)
302   PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_CATEGORY(2)
303INPUT_PORTS_END
253304
254    PORT_START("IN4")
255    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8 (pad 2)") PORT_CODE(KEYCODE_8_PAD)
256    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9 (pad 2)") PORT_CODE(KEYCODE_9_PAD)
257    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("# (pad 2)") PORT_CODE(KEYCODE_MINUS_PAD)
258    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(". (pad 2)") PORT_CODE(KEYCODE_PLUS_PAD)
259    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 )      PORT_PLAYER(2)
260    PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
305static INPUT_PORTS_START( sac1 )
306   PORT_START("SAC_KPD1")
307   PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0 (SAC pad 1)") PORT_CODE(KEYCODE_0) PORT_CATEGORY(3)
308   PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1 (SAC pad 1)") PORT_CODE(KEYCODE_1) PORT_CATEGORY(3)
309   PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2 (SAC pad 1)") PORT_CODE(KEYCODE_2) PORT_CATEGORY(3)
310   PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3 (SAC pad 1)") PORT_CODE(KEYCODE_3) PORT_CATEGORY(3)
311   PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4 (SAC pad 1)") PORT_CODE(KEYCODE_4) PORT_CATEGORY(3)
312   PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5 (SAC pad 1)") PORT_CODE(KEYCODE_5) PORT_CATEGORY(3)
313   PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6 (SAC pad 1)") PORT_CODE(KEYCODE_6) PORT_CATEGORY(3)
314   PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7 (SAC pad 1)") PORT_CODE(KEYCODE_7) PORT_CATEGORY(3)
315   PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8 (SAC pad 1)") PORT_CODE(KEYCODE_8) PORT_CATEGORY(3)
316   PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9 (SAC pad 1)") PORT_CODE(KEYCODE_9) PORT_CATEGORY(3)
317   PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("# (SAC pad 1)") PORT_CODE(KEYCODE_MINUS) PORT_CATEGORY(3)
318   PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(". (SAC pad 1)") PORT_CODE(KEYCODE_EQUALS) PORT_CATEGORY(3)
319   PORT_BIT( 0x1000, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_NAME("Blue Action Button P1") PORT_PLAYER(1) PORT_CATEGORY(3)
320   PORT_BIT( 0x2000, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_NAME("Purple Action Button P1") PORT_PLAYER(1) PORT_CATEGORY(3)
321   PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_NAME("Orange Action Button P1") PORT_PLAYER(1) PORT_CATEGORY(3)
322   PORT_BIT( 0x8000, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_CATEGORY(3)
261323
262    PORT_START("IN5")
263    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )   PORT_PLAYER(2)
264    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )   PORT_PLAYER(2)
265    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )   PORT_PLAYER(2)
266    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )   PORT_PLAYER(2)
267    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 )      PORT_PLAYER(2)
268    PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
324   PORT_START("SAC_JOY1")
325   PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )      PORT_PLAYER(1) PORT_CATEGORY(3)
326   PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )      PORT_PLAYER(1) PORT_CATEGORY(3)
327   PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )      PORT_PLAYER(1) PORT_CATEGORY(3)
328   PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )      PORT_PLAYER(1) PORT_CATEGORY(3)
329   PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_NAME("Yellow Action Button P1") PORT_PLAYER(1) PORT_CATEGORY(3)
330   PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_CATEGORY(3)
269331
270    PORT_START("IN6")
271    PORT_DIPNAME( 0x07, 0x00, "Extra Controllers" )
272    PORT_DIPSETTING(   0x00, DEF_STR( None ) )
273    PORT_DIPSETTING(   0x01, "Driving Controller" )
274    PORT_DIPSETTING(   0x02, "Roller Controller" )
275    PORT_DIPSETTING(   0x04, "Super Action Controllers" )
276    PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_NAME("SAC Blue Button P1")   PORT_CODE(KEYCODE_Z)
277    PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_NAME("SAC Purple Button P1")   PORT_CODE(KEYCODE_X)
278    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_NAME("SAC Blue Button P2")   PORT_CODE(KEYCODE_Q) PORT_PLAYER(2)
279    PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_NAME("SAC Purple Button P2")   PORT_CODE(KEYCODE_W) PORT_PLAYER(2)
332   PORT_START("SAC_SLIDE1")   // SAC P1 slider
333   PORT_BIT( 0x0f, 0x00, IPT_DIAL ) PORT_SENSITIVITY(20) PORT_KEYDELTA(10) PORT_CODE_DEC(KEYCODE_L) PORT_CODE_INC(KEYCODE_J) PORT_RESET PORT_PLAYER(1) PORT_CATEGORY(3)
334INPUT_PORTS_END
280335
281    PORT_START("IN7")   // Extra Controls (Driving Controller, SAC P1 slider, Roller Controller X Axis)
282    PORT_BIT( 0x0f, 0x00, IPT_TRACKBALL_X ) PORT_SENSITIVITY(20) PORT_KEYDELTA(10) PORT_CODE_DEC(KEYCODE_L) PORT_CODE_INC(KEYCODE_J) PORT_RESET
336static INPUT_PORTS_START( sac2 )
337   PORT_START("SAC_KPD2")
338   PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0 (SAC pad 2)") PORT_CODE(KEYCODE_0_PAD) PORT_CATEGORY(4)
339   PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1 (SAC pad 2)") PORT_CODE(KEYCODE_1_PAD) PORT_CATEGORY(4)
340   PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2 (SAC pad 2)") PORT_CODE(KEYCODE_2_PAD) PORT_CATEGORY(4)
341   PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3 (SAC pad 2)") PORT_CODE(KEYCODE_3_PAD) PORT_CATEGORY(4)
342   PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4 (SAC pad 2)") PORT_CODE(KEYCODE_4_PAD) PORT_CATEGORY(4)
343   PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5 (SAC pad 2)") PORT_CODE(KEYCODE_5_PAD) PORT_CATEGORY(4)
344   PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6 (SAC pad 2)") PORT_CODE(KEYCODE_6_PAD) PORT_CATEGORY(4)
345   PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7 (SAC pad 2)") PORT_CODE(KEYCODE_7_PAD) PORT_CATEGORY(4)
346   PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8 (SAC pad 2)") PORT_CODE(KEYCODE_8_PAD) PORT_CATEGORY(4)
347   PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9 (SAC pad 2)") PORT_CODE(KEYCODE_9_PAD) PORT_CATEGORY(4)
348   PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("# (SAC pad 2)") PORT_CODE(KEYCODE_MINUS_PAD) PORT_CATEGORY(4)
349   PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(". (SAC pad 2)") PORT_CODE(KEYCODE_PLUS_PAD) PORT_CATEGORY(4)
350   PORT_BIT( 0x1000, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_NAME("Blue Action Button P2") PORT_PLAYER(2) PORT_CATEGORY(4)
351   PORT_BIT( 0x2000, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_NAME("Purple Action Button P2") PORT_PLAYER(2) PORT_CATEGORY(4)
352   PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_NAME("Orange Action Button P2") PORT_PLAYER(2) PORT_CATEGORY(4)
353   PORT_BIT( 0x8000, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_CATEGORY(4)
283354
284    PORT_START("IN8")   // Extra Controls (SAC P2 slider, Roller Controller Y Axis)
285    PORT_BIT( 0x0f, 0x00, IPT_TRACKBALL_Y ) PORT_SENSITIVITY(20) PORT_KEYDELTA(10) PORT_CODE_DEC(KEYCODE_I) PORT_CODE_INC(KEYCODE_K) PORT_RESET PORT_PLAYER(2)
355   PORT_START("SAC_JOY2")
356   PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )   PORT_PLAYER(2) PORT_CATEGORY(4)
357   PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )   PORT_PLAYER(2) PORT_CATEGORY(4)
358   PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )   PORT_PLAYER(2) PORT_CATEGORY(4)
359   PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )   PORT_PLAYER(2) PORT_CATEGORY(4)
360   PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_NAME("Yellow Action Button P2") PORT_PLAYER(2) PORT_CATEGORY(4)
361   PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_CATEGORY(4)
362
363   PORT_START("SAC_SLIDE2")   // SAC P2 slider
364   PORT_BIT( 0x0f, 0x00, IPT_DIAL ) PORT_SENSITIVITY(20) PORT_KEYDELTA(10) PORT_CODE_DEC(KEYCODE_I) PORT_CODE_INC(KEYCODE_K) PORT_RESET PORT_PLAYER(2) PORT_CATEGORY(4)
286365INPUT_PORTS_END
287366
288static INPUT_PORTS_START( czz50 )
289    PORT_START("IN0")
290    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0") PORT_CODE(KEYCODE_0) PORT_CHAR('0')
291    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1") PORT_CODE(KEYCODE_1) PORT_CHAR('1')
292    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2") PORT_CODE(KEYCODE_2) PORT_CHAR('2')
293    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3") PORT_CODE(KEYCODE_3) PORT_CHAR('3')
294    PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4") PORT_CODE(KEYCODE_4) PORT_CHAR('4')
295    PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5") PORT_CODE(KEYCODE_5) PORT_CHAR('5')
296    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6") PORT_CODE(KEYCODE_6) PORT_CHAR('6')
297    PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7") PORT_CODE(KEYCODE_7) PORT_CHAR('7')
367static INPUT_PORTS_START( driving )
368   PORT_START("DRIV")   // Driving Controller
369   PORT_BIT( 0x0f, 0x00, IPT_DIAL ) PORT_SENSITIVITY(20) PORT_KEYDELTA(10) PORT_CODE_DEC(KEYCODE_L) PORT_CODE_INC(KEYCODE_J) PORT_RESET PORT_CATEGORY(5)
298370
299    PORT_START("IN1")
300    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8") PORT_CODE(KEYCODE_8) PORT_CHAR('8')
301    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9") PORT_CODE(KEYCODE_9) PORT_CHAR('9')
302   PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("#") PORT_CODE(KEYCODE_MINUS) PORT_CHAR('#')
303    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(".") PORT_CODE(KEYCODE_EQUALS) PORT_CHAR('.')
304    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 )      PORT_PLAYER(1)
305    PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
371//   PORT_START("IN8")   //
372//   PORT_BIT( 0x0f, 0x00, IPT_TRACKBALL_Y ) PORT_SENSITIVITY(20) PORT_KEYDELTA(10) PORT_CODE_DEC(KEYCODE_I) PORT_CODE_INC(KEYCODE_K) PORT_PLAYER(2) PORT_CATEGORY(5)
373INPUT_PORTS_END
306374
307    PORT_START("IN2")
308    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )   PORT_PLAYER(1)
309    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )   PORT_PLAYER(1)
310    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )   PORT_PLAYER(1)
311    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )   PORT_PLAYER(1)
312    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 )      PORT_PLAYER(1)
313    PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
375static INPUT_PORTS_START( roller )
376   PORT_START("ROLLER_X")   // Roller Controller X Axis
377   PORT_BIT( 0x0f, 0x00, IPT_TRACKBALL_X ) PORT_SENSITIVITY(20) PORT_KEYDELTA(10) PORT_CODE_DEC(KEYCODE_L) PORT_CODE_INC(KEYCODE_J) PORT_RESET PORT_CATEGORY(6)
314378
315    PORT_START("IN3")
316    PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED )
379   PORT_START("ROLLER_Y")   // Roller Controller Y Axis
380   PORT_BIT( 0x0f, 0x00, IPT_TRACKBALL_Y ) PORT_SENSITIVITY(20) PORT_KEYDELTA(10) PORT_CODE_DEC(KEYCODE_I) PORT_CODE_INC(KEYCODE_K) PORT_RESET PORT_CATEGORY(6)
381INPUT_PORTS_END
317382
318    PORT_START("IN4")
319    PORT_BIT( 0x0f, IP_ACTIVE_LOW, IPT_UNUSED )
320    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 )      PORT_PLAYER(2)
321    PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
383static INPUT_PORTS_START( coleco )
384   PORT_START("CTRLSEL")  /* Select Controller Type */
385   PORT_CATEGORY_CLASS( 0x07, 0x00, "Port 1 Controller" )
386   PORT_CATEGORY_ITEM(  0x01, DEF_STR( None ),            0 )
387   PORT_CATEGORY_ITEM(  0x00, "ColecoVision Controller",   1 )
388   PORT_CATEGORY_ITEM(  0x02, "Super Action Controller",   3 )
389   PORT_CATEGORY_ITEM(  0x03, "Driving Controller",      5 )
390   PORT_CATEGORY_CLASS( 0x70, 0x00, "Port 2 Controller" )
391   PORT_CATEGORY_ITEM(  0x10, DEF_STR( None ),            0 )
392   PORT_CATEGORY_ITEM(  0x00, "ColecoVision Controller",   2 )
393   PORT_CATEGORY_ITEM(  0x20, "Super Action Controller",   4 )
394   PORT_CATEGORY_CLASS( 0x80, 0x00, "Extra Controller" )
395   PORT_CATEGORY_ITEM(  0x00, DEF_STR( None ),            0 )
396   PORT_CATEGORY_ITEM(  0x80, "Roller Controller",         6 )
322397
323    PORT_START("IN5")
324    PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )   PORT_PLAYER(2)
325    PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )   PORT_PLAYER(2)
326    PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )   PORT_PLAYER(2)
327    PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )   PORT_PLAYER(2)
328    PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 )      PORT_PLAYER(2)
329    PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
398   PORT_INCLUDE( ctrl1 )
399   PORT_INCLUDE( ctrl2 )
400   PORT_INCLUDE( sac1 )
401   PORT_INCLUDE( sac2 )
402   PORT_INCLUDE( driving )
403   PORT_INCLUDE( roller )
330404INPUT_PORTS_END
331405
406
407static INPUT_PORTS_START( czz50 )
408   PORT_START("KEYPAD1")
409   PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0") PORT_CODE(KEYCODE_0) PORT_CHAR('0')
410   PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1") PORT_CODE(KEYCODE_1) PORT_CHAR('1')
411   PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2") PORT_CODE(KEYCODE_2) PORT_CHAR('2')
412   PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3") PORT_CODE(KEYCODE_3) PORT_CHAR('3')
413   PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4") PORT_CODE(KEYCODE_4) PORT_CHAR('4')
414   PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5") PORT_CODE(KEYCODE_5) PORT_CHAR('5')
415   PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6") PORT_CODE(KEYCODE_6) PORT_CHAR('6')
416   PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7") PORT_CODE(KEYCODE_7) PORT_CHAR('7')
417   PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8") PORT_CODE(KEYCODE_8) PORT_CHAR('8')
418   PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9") PORT_CODE(KEYCODE_9) PORT_CHAR('9')
419   PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("#") PORT_CODE(KEYCODE_MINUS) PORT_CHAR('#')
420   PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(".") PORT_CODE(KEYCODE_EQUALS) PORT_CHAR('.')
421   PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_BUTTON2 )      PORT_PLAYER(1)
422   PORT_BIT( 0xb000, IP_ACTIVE_LOW, IPT_UNKNOWN )
423
424   PORT_START("JOY1")
425   PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )   PORT_PLAYER(1)
426   PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )   PORT_PLAYER(1)
427   PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )   PORT_PLAYER(1)
428   PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )   PORT_PLAYER(1)
429   PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 )      PORT_PLAYER(1)
430   PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
431
432   PORT_START("KEYPAD2")
433   PORT_BIT( 0x00ff, IP_ACTIVE_LOW, IPT_UNUSED )
434   PORT_BIT( 0x0f00, IP_ACTIVE_LOW, IPT_UNUSED )
435   PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_BUTTON2 )      PORT_PLAYER(2)
436   PORT_BIT( 0xb000, IP_ACTIVE_LOW, IPT_UNKNOWN )
437
438   PORT_START("JOY2")
439   PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )   PORT_PLAYER(2)
440   PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )   PORT_PLAYER(2)
441   PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )   PORT_PLAYER(2)
442   PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )   PORT_PLAYER(2)
443   PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 )      PORT_PLAYER(2)
444   PORT_BIT( 0xb0, IP_ACTIVE_LOW, IPT_UNKNOWN )
445INPUT_PORTS_END
446
332447/***************************************************************************
333448
334449  The interrupts come from the vdp. The vdp (tms9928a) interrupt can go up
r4476r4477
359474
360475static TIMER_CALLBACK( paddle_callback )
361476{
362    int port7 = input_port_read_safe(machine, "IN7", 0);
363    int port8 = input_port_read_safe(machine, "IN8", 0);
477   UINT8 analog1 = 0x00;
478   UINT8 analog2 = 0x00;
479   UINT8 ctrl_sel = input_port_read_safe(machine, "CTRLSEL", 0);
364480
365    if (port7 == 0)
481   /* which controller shall we read? */
482   if ((ctrl_sel & 0x07) == 0x03)   // Driving controller
483      analog1 = input_port_read_safe(machine, "DRIV", 0);
484   
485   else
486   {
487      if ((ctrl_sel & 0x07) == 0x02)   // Super Action Controller P1
488         analog1 = input_port_read_safe(machine, "SAC_SLIDE1", 0);
489
490      if ((ctrl_sel & 0x70) == 0x20)   // Super Action Controller P2
491         analog2 = input_port_read_safe(machine, "SAC_SLIDE2", 0);
492
493      /* In principle, even if not supported by any game, I guess we could have two Super
494      Action Controllers plugged into the Roller controller ports. Since I found no info
495      about the behavior of sliders in such a configuration, we overwrite SAC sliders with
496      the Roller trackball inputs and actually use the latter ones, when both are selected. */
497      if (ctrl_sel & 0x80)            // Roller controller
498      {
499         analog1 = input_port_read_safe(machine, "ROLLER_X", 0);
500         analog2 = input_port_read_safe(machine, "ROLLER_Y", 0);
501      }
502   }
503
504    if (analog1 == 0)
366505      joy_status[0] = 0;
367    else if (port7 & 0x08)
506    else if (analog1 & 0x08)
368507      joy_status[0] = -1;
369508    else
370509      joy_status[0] = 1;
371510
372    if (port8 == 0)
511    if (analog2 == 0)
373512      joy_status[1] = 0;
374    else if (port8 & 0x08)
513    else if (analog2 & 0x08)
375514      joy_status[1] = -1;
376515    else
377516      joy_status[1] = 1;
docs/messnew.txt
r4476r4477
10.130.1
10.130.1
22
33New System Drivers Supported (in no particular order):
44------------------------------------------------------
r4476r4477
1313----------------------
1414- [A7800] Better NTSC palette.  [Robert Tuccitto]
1515
16- [COLECO] Converted to use PORT_CATEGORY for controller selection. Check
17  the Category Menu (after pressing TAB) to enable Extra controllers. [Fabio
18  Priuli]
19
20- [COLECO] Fixed Super Action Controller emulation (it was missing additional
21  action buttons and P2 slider). [Fabio Priuli]
22
1623- [ELECTRON] Fixed graphical display modes. [Robbbert]
1724
1825- [STUDIO2] Fixed .st2 cartridge loading. [Curt Coder]

Previous 15994 Revisions Next


© 1998-2018 The MESS Team