src/mess/machine/i8279.c
| r14931 | r14932 | |
| 1 | | /********************************************************************** |
| 2 | | |
| 3 | | i8279 |
| 4 | | |
| 5 | | 2012-JAN-08 First draft [Robbbert] |
| 6 | | 2012-JAN-12 Implemented |
| 7 | | |
| 8 | | Notes: |
| 9 | | - All keys MUST be ACTIVE_LOW |
| 10 | | |
| 11 | | |
| 12 | | ToDo: |
| 13 | | - Command 5 (Nibble masking and blanking) |
| 14 | | - Command 7 (Error Mode) |
| 15 | | - Interrupts |
| 16 | | - BD pin |
| 17 | | - Sensor ram stuff |
| 18 | | - save state |
| 19 | | |
| 20 | | |
| 21 | | What has been done: |
| 22 | | CMD 0: |
| 23 | | - Display Mode |
| 24 | | -- Left & Right with no increment are the same thing |
| 25 | | -- Right with increment is not emulated yet *** |
| 26 | | - Keyboard Mode |
| 27 | | -- No particular code has been added for 2-key/N-key rollover, no need |
| 28 | | -- Sensor mode is not complete yet *** |
| 29 | | -- Encoded and Decoded are done |
| 30 | | -- Strobe is done |
| 31 | | -- Sensor and FIFO may share the same internal RAM, not sure |
| 32 | | CMD 1: |
| 33 | | - Clock Divider |
| 34 | | -- Value is stored, but internally a fixed value is always used |
| 35 | | CMD 2: |
| 36 | | - Read FIFO/Sensor RAM |
| 37 | | -- FIFO works |
| 38 | | -- Sensor not done yet *** |
| 39 | | CMD 3: |
| 40 | | - Read Display RAM |
| 41 | | -- This works |
| 42 | | CMD 4: |
| 43 | | - Write Display RAM |
| 44 | | -- Right with increment does nothing, the rest is working *** |
| 45 | | CMD 5: |
| 46 | | - Blank Nibble |
| 47 | | -- Not done *** |
| 48 | | - Mask Nibble |
| 49 | | -- Not done *** |
| 50 | | CMD 6: |
| 51 | | -- All implemented |
| 52 | | CMD 7: |
| 53 | | - Interrupt |
| 54 | | -- Not done |
| 55 | | - Error Mode |
| 56 | | -- No need to do. |
| 57 | | |
| 58 | | Interface: |
| 59 | | -- All done except BD pin *** |
| 60 | | |
| 61 | | Status word: |
| 62 | | - FIFO bits |
| 63 | | -- All done |
| 64 | | - Error bit |
| 65 | | -- Not done (no need) |
| 66 | | - Display unavailable |
| 67 | | -- Not done (no need) |
| 68 | | |
| 69 | | |
| 70 | | Items marked (***) can be added if a system appears |
| 71 | | that uses this feature. |
| 72 | | |
| 73 | | **********************************************************************/ |
| 74 | | |
| 75 | | #include "i8279.h" |
| 76 | | |
| 77 | | |
| 78 | | //************************************************************************** |
| 79 | | // LIVE DEVICE |
| 80 | | //************************************************************************** |
| 81 | | |
| 82 | | // device type definition |
| 83 | | const device_type I8279 = &device_creator<i8279_device>; |
| 84 | | |
| 85 | | //------------------------------------------------- |
| 86 | | // i8279_device - constructor |
| 87 | | //------------------------------------------------- |
| 88 | | |
| 89 | | i8279_device::i8279_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock) |
| 90 | | : device_t(mconfig, I8279, "Intel 8279", tag, owner, clock) |
| 91 | | { |
| 92 | | } |
| 93 | | |
| 94 | | //------------------------------------------------- |
| 95 | | // device_config_complete - perform any |
| 96 | | // operations now that the configuration is |
| 97 | | // complete |
| 98 | | //------------------------------------------------- |
| 99 | | |
| 100 | | void i8279_device::device_config_complete() |
| 101 | | { |
| 102 | | // inherit a copy of the static data |
| 103 | | const i8279_interface *intf = reinterpret_cast<const i8279_interface *>(static_config()); |
| 104 | | if (intf != NULL) |
| 105 | | { |
| 106 | | *static_cast<i8279_interface *>(this) = *intf; |
| 107 | | } |
| 108 | | |
| 109 | | // or initialize to defaults if none provided |
| 110 | | else |
| 111 | | { |
| 112 | | memset(&m_out_irq_cb, 0, sizeof(m_out_irq_cb)); |
| 113 | | memset(&m_out_sl_cb, 0, sizeof(m_out_sl_cb)); |
| 114 | | memset(&m_out_disp_cb, 0, sizeof(m_out_disp_cb)); |
| 115 | | memset(&m_out_bd_cb, 0, sizeof(m_out_bd_cb)); |
| 116 | | memset(&m_in_rl_cb, 0, sizeof(m_in_rl_cb)); |
| 117 | | memset(&m_in_shift_cb, 0, sizeof(m_in_shift_cb)); |
| 118 | | memset(&m_in_ctrl_cb, 0, sizeof(m_in_ctrl_cb)); |
| 119 | | } |
| 120 | | } |
| 121 | | |
| 122 | | |
| 123 | | //------------------------------------------------- |
| 124 | | // device_start - device-specific startup |
| 125 | | //------------------------------------------------- |
| 126 | | |
| 127 | | void i8279_device::device_start() |
| 128 | | { |
| 129 | | /* resolve callbacks */ |
| 130 | | m_out_irq_func.resolve(m_out_irq_cb, *this); |
| 131 | | m_out_sl_func.resolve(m_out_sl_cb, *this); |
| 132 | | m_out_disp_func.resolve(m_out_disp_cb, *this); |
| 133 | | m_out_bd_func.resolve(m_out_bd_cb, *this); |
| 134 | | m_in_rl_func.resolve(m_in_rl_cb, *this); |
| 135 | | m_in_shift_func.resolve(m_in_shift_cb, *this); |
| 136 | | m_in_ctrl_func.resolve(m_in_ctrl_cb, *this); |
| 137 | | m_clock = clock(); |
| 138 | | m_timer = machine().scheduler().timer_alloc(FUNC(timerproc_callback), (void *)this); |
| 139 | | } |
| 140 | | |
| 141 | | |
| 142 | | //------------------------------------------------- |
| 143 | | // device_reset - device-specific reset |
| 144 | | //------------------------------------------------- |
| 145 | | |
| 146 | | void i8279_device::device_reset() |
| 147 | | { |
| 148 | | UINT8 i; |
| 149 | | |
| 150 | | // startup values are unknown: setting to 0 |
| 151 | | for (i = 2; i < 8; i++) m_cmd[i] = 0; |
| 152 | | for (i = 0; i < 8; i++) m_fifo[i] = 0; |
| 153 | | for (i = 0; i < 8; i++) m_s_ram[i] = 0; |
| 154 | | for (i = 0; i < 16; i++) m_d_ram[i] = 0; |
| 155 | | m_status = 0; |
| 156 | | m_autoinc = 1; |
| 157 | | m_d_ram_ptr = 0; |
| 158 | | m_s_ram_ptr = 0; |
| 159 | | m_read_flag = 0; |
| 160 | | m_scanner = 0; |
| 161 | | m_ctrl_key = 1; |
| 162 | | m_key_down = 0xffff; |
| 163 | | |
| 164 | | // from here is confirmed |
| 165 | | m_cmd[0] = 8; |
| 166 | | m_cmd[1] = 31; |
| 167 | | logerror("Initial clock = 3100kHz\n"); |
| 168 | | timer_adjust(); |
| 169 | | } |
| 170 | | |
| 171 | | |
| 172 | | void i8279_device::timer_adjust() |
| 173 | | { |
| 174 | | // Real device runs at about 100kHz internally, clock divider is chosen so that |
| 175 | | // this is the case. We do not need such speed, 200Hz is enough. |
| 176 | | |
| 177 | | //UINT8 divider = (m_cmd[1]) ? m_cmd[1] : 1; |
| 178 | | //m_clock = clock() / divider; |
| 179 | | |
| 180 | | m_clock = 200; |
| 181 | | m_timer->adjust(attotime::from_hz(m_clock), 0, attotime::from_hz(m_clock)); |
| 182 | | } |
| 183 | | |
| 184 | | |
| 185 | | void i8279_device::clear_display() |
| 186 | | { |
| 187 | | // clear all digits |
| 188 | | UINT8 i,patterns[4] = { 0, 0, 0x20, 0xff }; |
| 189 | | UINT8 data = patterns[(m_cmd[6] & 12) >> 2]; |
| 190 | | |
| 191 | | // The CD high bit (also done by CA) |
| 192 | | if (m_cmd[6] & 11) |
| 193 | | for (i = 0; i < 16; i++) |
| 194 | | m_d_ram[i] = data; |
| 195 | | |
| 196 | | m_status &= 0x7f; // bit 7 not emulated, but do it anyway |
| 197 | | m_d_ram_ptr = 0; // not in the datasheet, but needed |
| 198 | | |
| 199 | | // The CF bit (also done by CA) |
| 200 | | if (m_cmd[6] & 3) |
| 201 | | { |
| 202 | | m_status &= 0xc0; // blow away fifo |
| 203 | | m_s_ram_ptr = 0; // reset sensor pointer |
| 204 | | set_irq(0); // reset irq |
| 205 | | } |
| 206 | | } |
| 207 | | |
| 208 | | |
| 209 | | void i8279_device::set_irq(bool state) |
| 210 | | { |
| 211 | | if ( !m_out_irq_func.isnull() ) |
| 212 | | m_out_irq_func( state ); |
| 213 | | } |
| 214 | | |
| 215 | | |
| 216 | | void i8279_device::new_key(UINT8 data, bool skey, bool ckey) |
| 217 | | { |
| 218 | | UINT8 i, rl, sl; |
| 219 | | for (i = 0; BIT(data, i); i++); |
| 220 | | rl = i; |
| 221 | | if (BIT(m_cmd[0], 0)) |
| 222 | | { |
| 223 | | for (i = 0; !BIT(data, i); i++); |
| 224 | | sl = i; |
| 225 | | } |
| 226 | | else |
| 227 | | sl = m_scanner; |
| 228 | | |
| 229 | | new_fifo( (ckey << 7) | (skey << 6) | (sl << 3) | rl); |
| 230 | | } |
| 231 | | |
| 232 | | |
| 233 | | void i8279_device::new_fifo(UINT8 data) |
| 234 | | { |
| 235 | | // see if already overrun |
| 236 | | if (BIT(m_status, 5)) |
| 237 | | return; |
| 238 | | |
| 239 | | // set overrun flag if full |
| 240 | | if (BIT(m_status, 3)) |
| 241 | | { |
| 242 | | m_status |= 0x20; |
| 243 | | return; |
| 244 | | } |
| 245 | | |
| 246 | | m_fifo[m_status & 7] = data; |
| 247 | | |
| 248 | | // bump fifo size & turn off underrun |
| 249 | | UINT8 fifo_size = m_status & 7; |
| 250 | | if ((fifo_size)==7) |
| 251 | | m_status |= 8; // full |
| 252 | | else |
| 253 | | m_status = (m_status & 0xe8) + fifo_size + 1; |
| 254 | | |
| 255 | | if (!fifo_size) |
| 256 | | set_irq(1); // something just went into fifo, so int |
| 257 | | } |
| 258 | | |
| 259 | | |
| 260 | | TIMER_CALLBACK( i8279_device::timerproc_callback ) |
| 261 | | { |
| 262 | | reinterpret_cast<i8279_device*>(ptr)->timer_mainloop(); |
| 263 | | } |
| 264 | | |
| 265 | | |
| 266 | | void i8279_device::timer_mainloop() |
| 267 | | { |
| 268 | | // control byte 0 |
| 269 | | // bit 0 - encoded or decoded keyboard scan |
| 270 | | // bits 1,2 - keyboard type |
| 271 | | // bit 3 - number of digits to display |
| 272 | | // bit 4 - left or right entry |
| 273 | | |
| 274 | | UINT8 scanner_mask = BIT(m_cmd[0], 0) ? 15 : BIT(m_cmd[0], 3) ? 15 : 7; |
| 275 | | bool decoded = BIT(m_cmd[0], 0); |
| 276 | | UINT8 kbd_type = (m_cmd[0] & 6) >> 1; |
| 277 | | bool shift_key = 1; |
| 278 | | bool ctrl_key = 1; |
| 279 | | bool strobe_pulse = 0; |
| 280 | | |
| 281 | | // keyboard |
| 282 | | // type 0 = kbd, 2-key lockout |
| 283 | | // type 1 = kdb, n-key |
| 284 | | // type 2 = sensor |
| 285 | | // type 3 = strobed |
| 286 | | |
| 287 | | // Get shift keys |
| 288 | | if ( !m_in_shift_func.isnull() ) |
| 289 | | shift_key = m_in_shift_func(); |
| 290 | | |
| 291 | | if ( !m_in_ctrl_func.isnull() ) |
| 292 | | ctrl_key = m_in_ctrl_func(); |
| 293 | | |
| 294 | | if (ctrl_key && !m_ctrl_key) |
| 295 | | strobe_pulse = 1; // low-to-high is a strobe |
| 296 | | |
| 297 | | m_ctrl_key = ctrl_key; |
| 298 | | |
| 299 | | // Read a row of keys |
| 300 | | |
| 301 | | if ( !m_in_rl_func.isnull() ) |
| 302 | | { |
| 303 | | UINT8 rl = m_in_rl_func(0); |
| 304 | | |
| 305 | | // see if key still down from last time |
| 306 | | UINT16 key_down = (m_scanner << 8) | rl; |
| 307 | | if (key_down == m_key_down) |
| 308 | | rl = 0xff; |
| 309 | | else |
| 310 | | if ((rl == 0xff) && (m_scanner == m_key_down >> 8)) |
| 311 | | m_key_down = 0xffff; |
| 312 | | |
| 313 | | // now process new key |
| 314 | | if (rl < 0xff) |
| 315 | | { |
| 316 | | m_key_down = key_down; |
| 317 | | switch (kbd_type) |
| 318 | | { |
| 319 | | case 0: |
| 320 | | case 1: |
| 321 | | new_key(rl, shift_key, ctrl_key); |
| 322 | | break; |
| 323 | | case 2: |
| 324 | | new_fifo(rl); |
| 325 | | break; |
| 326 | | case 3: |
| 327 | | if (strobe_pulse) new_fifo(rl); |
| 328 | | break; |
| 329 | | } |
| 330 | | } |
| 331 | | } |
| 332 | | |
| 333 | | // Increment scanline |
| 334 | | |
| 335 | | if (decoded) |
| 336 | | { |
| 337 | | m_scanner<<= 1; |
| 338 | | if ((m_scanner & 15)==0) |
| 339 | | m_scanner = 1; |
| 340 | | } |
| 341 | | else |
| 342 | | m_scanner++; |
| 343 | | |
| 344 | | m_scanner &= scanner_mask; // 4-bit port |
| 345 | | |
| 346 | | if ( !m_out_sl_func.isnull() ) |
| 347 | | m_out_sl_func(0, m_scanner); |
| 348 | | |
| 349 | | // output a digit |
| 350 | | |
| 351 | | if ( !m_out_disp_func.isnull() ) |
| 352 | | m_out_disp_func(0, m_d_ram[m_scanner] ); |
| 353 | | } |
| 354 | | |
| 355 | | |
| 356 | | READ8_MEMBER( i8279_device::status_r ) |
| 357 | | { |
| 358 | | return m_status; |
| 359 | | } |
| 360 | | |
| 361 | | |
| 362 | | READ8_MEMBER( i8279_device::data_r ) |
| 363 | | { |
| 364 | | UINT8 i; |
| 365 | | bool sensor_mode = ((m_cmd[0] & 6)==4); |
| 366 | | UINT8 data; |
| 367 | | if (m_read_flag) |
| 368 | | { |
| 369 | | // read the display ram |
| 370 | | data = m_d_ram[m_d_ram_ptr]; |
| 371 | | if (m_autoinc) |
| 372 | | m_d_ram_ptr++; |
| 373 | | } |
| 374 | | else |
| 375 | | if (sensor_mode) |
| 376 | | { |
| 377 | | // read sensor ram |
| 378 | | data = m_s_ram[m_s_ram_ptr]; |
| 379 | | if (m_autoinc) |
| 380 | | m_s_ram_ptr++; |
| 381 | | } |
| 382 | | else |
| 383 | | { |
| 384 | | // read a key from fifo |
| 385 | | data = m_fifo[0]; |
| 386 | | UINT8 fifo_size = m_status & 7; |
| 387 | | switch (m_status & 0x38) |
| 388 | | { |
| 389 | | case 0x00: // no errors |
| 390 | | if (!fifo_size) |
| 391 | | m_status |= 0x10; // underrun |
| 392 | | else |
| 393 | | { |
| 394 | | for (i = 1; i < 8; i++) |
| 395 | | m_fifo[i-1] = m_fifo[i]; |
| 396 | | fifo_size--; |
| 397 | | if (!fifo_size) |
| 398 | | set_irq(0); |
| 399 | | } |
| 400 | | break; |
| 401 | | case 0x28: // overrun |
| 402 | | case 0x08: // fifo full |
| 403 | | for (i = 1; i < 8; i++) |
| 404 | | m_fifo[i-1] = m_fifo[i]; |
| 405 | | break; |
| 406 | | case 0x10: // underrun |
| 407 | | if (!fifo_size) |
| 408 | | break; |
| 409 | | default: |
| 410 | | printf("Invalid status: %X\n", m_status); |
| 411 | | } |
| 412 | | m_status = (m_status & 0xd0) | fifo_size; // turn off overrun & full |
| 413 | | } |
| 414 | | |
| 415 | | m_d_ram_ptr &= 15; |
| 416 | | m_s_ram_ptr &= 7; |
| 417 | | return data; |
| 418 | | } |
| 419 | | |
| 420 | | |
| 421 | | WRITE8_MEMBER( i8279_device::cmd_w ) |
| 422 | | {//printf("Command: %X=%X ",data>>5,data&31); |
| 423 | | UINT8 cmd = data >> 5; |
| 424 | | data &= 0x1f; |
| 425 | | m_cmd[cmd] = data; |
| 426 | | switch (cmd) |
| 427 | | { |
| 428 | | case 1: |
| 429 | | if (data > 1) |
| 430 | | { |
| 431 | | logerror("Clock set to %dkHz\n",data*100); |
| 432 | | timer_adjust(); |
| 433 | | } |
| 434 | | break; |
| 435 | | case 2: |
| 436 | | m_read_flag = 0; |
| 437 | | if ((m_cmd[0] & 6)==4) // sensor mode only |
| 438 | | { |
| 439 | | m_autoinc = BIT(data, 4); |
| 440 | | m_s_ram_ptr = data & 7; |
| 441 | | } |
| 442 | | break; |
| 443 | | case 3: |
| 444 | | m_read_flag = 1; |
| 445 | | m_d_ram_ptr = data & 15; |
| 446 | | m_autoinc = BIT(data, 4); |
| 447 | | break; |
| 448 | | case 4: |
| 449 | | m_d_ram_ptr = data & 15; |
| 450 | | m_autoinc = BIT(data, 4); |
| 451 | | break; |
| 452 | | case 6: |
| 453 | | clear_display(); |
| 454 | | break; |
| 455 | | } |
| 456 | | } |
| 457 | | |
| 458 | | |
| 459 | | WRITE8_MEMBER( i8279_device::data_w ) |
| 460 | | {//printf("Data: %X ",data); |
| 461 | | if (BIT(m_cmd[0], 4) & m_autoinc) |
| 462 | | { |
| 463 | | // right-entry autoincrement not implemented yet |
| 464 | | } |
| 465 | | else |
| 466 | | { |
| 467 | | m_d_ram[m_d_ram_ptr] = data; |
| 468 | | if (m_autoinc) |
| 469 | | m_d_ram_ptr++; |
| 470 | | } |
| 471 | | m_d_ram_ptr &= 15; |
| 472 | | } |
| 473 | | |
src/mess/machine/i8279.h
| r14931 | r14932 | |
| 1 | | /*************************************************************************** |
| 2 | | |
| 3 | | Intel 8279 Programmable Keyboard/Display Interface emulation |
| 4 | | |
| 5 | | Copyright the MESS Team 2012. |
| 6 | | Visit http://mamedev.org for licensing and usage restrictions. |
| 7 | | |
| 8 | | **************************************************************************** |
| 9 | | _____ _____ |
| 10 | | RL2 1 |* \_/ | 40 Vcc |
| 11 | | RL3 2 | | 39 RL1 |
| 12 | | CLK 3 | | 38 RL0 |
| 13 | | IRQ 4 | | 37 CNTL/STB |
| 14 | | RL4 5 | | 36 SHIFT |
| 15 | | RL5 6 | | 35 SL3 |
| 16 | | RL6 7 | | 34 SL2 |
| 17 | | RL7 8 | | 33 SL1 |
| 18 | | RESET 9 | | 32 SL0 |
| 19 | | /RD 10 | 8279 | 31 B0 |
| 20 | | /WR 11 | | 30 B1 |
| 21 | | DB0 12 | | 29 B2 |
| 22 | | DB1 13 | | 28 B3 |
| 23 | | DB2 14 | | 27 A0 |
| 24 | | DB3 15 | | 26 A1 |
| 25 | | DB4 16 | | 25 A2 |
| 26 | | DB5 17 | | 24 A3 |
| 27 | | DB6 18 | | 23 /BD |
| 28 | | DB7 19 | | 22 /CS |
| 29 | | Vss 20 |_____________| 21 CTRL/DATA |
| 30 | | |
| 31 | | |
| 32 | | ***************************************************************************/ |
| 33 | | |
| 34 | | #pragma once |
| 35 | | |
| 36 | | #ifndef __I8279__ |
| 37 | | #define __I8279__ |
| 38 | | |
| 39 | | #include "emu.h" |
| 40 | | |
| 41 | | |
| 42 | | |
| 43 | | /*************************************************************************** |
| 44 | | DEVICE CONFIGURATION MACROS |
| 45 | | ***************************************************************************/ |
| 46 | | |
| 47 | | #define MCFG_I8279_ADD(_tag, _clock, _config) \ |
| 48 | | MCFG_DEVICE_ADD(_tag, I8279, _clock) \ |
| 49 | | MCFG_DEVICE_CONFIG(_config) |
| 50 | | |
| 51 | | #define I8279_INTERFACE(_name) \ |
| 52 | | const i8279_interface (_name) = |
| 53 | | |
| 54 | | |
| 55 | | /*************************************************************************** |
| 56 | | TYPE DEFINITIONS |
| 57 | | ***************************************************************************/ |
| 58 | | |
| 59 | | |
| 60 | | // ======================> i8279_interface |
| 61 | | |
| 62 | | struct i8279_interface |
| 63 | | { |
| 64 | | devcb_write_line m_out_irq_cb; // IRQ |
| 65 | | devcb_write8 m_out_sl_cb; // Scanlines SL0-3 |
| 66 | | devcb_write8 m_out_disp_cb; // B0-3,A0-3 |
| 67 | | devcb_write_line m_out_bd_cb; // BD |
| 68 | | devcb_read8 m_in_rl_cb; // kbd readlines RL0-7 |
| 69 | | devcb_read_line m_in_shift_cb; // Shift key |
| 70 | | devcb_read_line m_in_ctrl_cb; // Ctrl-Strobe line |
| 71 | | }; |
| 72 | | |
| 73 | | |
| 74 | | |
| 75 | | // ======================> i8279_device |
| 76 | | |
| 77 | | class i8279_device : public device_t, public i8279_interface |
| 78 | | { |
| 79 | | public: |
| 80 | | // construction/destruction |
| 81 | | i8279_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock); |
| 82 | | |
| 83 | | // read & write handlers |
| 84 | | DECLARE_READ8_MEMBER(status_r); |
| 85 | | DECLARE_READ8_MEMBER(data_r); |
| 86 | | DECLARE_WRITE8_MEMBER(cmd_w); |
| 87 | | DECLARE_WRITE8_MEMBER(data_w); |
| 88 | | void timer_mainloop(); |
| 89 | | |
| 90 | | protected: |
| 91 | | // device-level overrides |
| 92 | | virtual void device_config_complete(); |
| 93 | | virtual void device_start(); |
| 94 | | virtual void device_reset(); |
| 95 | | virtual void device_post_load() { } |
| 96 | | virtual void device_clock_changed() { } |
| 97 | | |
| 98 | | static TIMER_CALLBACK( timerproc_callback ); |
| 99 | | |
| 100 | | private: |
| 101 | | |
| 102 | | void timer_adjust(); |
| 103 | | void clear_display(); |
| 104 | | void new_key(UINT8 data, bool skey, bool ckey); |
| 105 | | void new_fifo(UINT8 data); |
| 106 | | UINT8 get_segments(); |
| 107 | | void set_irq(bool state); |
| 108 | | void set_display_mode(UINT8 data); |
| 109 | | |
| 110 | | devcb_resolved_write_line m_out_irq_func; |
| 111 | | devcb_resolved_write8 m_out_sl_func; |
| 112 | | devcb_resolved_write8 m_out_disp_func; |
| 113 | | devcb_resolved_write_line m_out_bd_func; |
| 114 | | devcb_resolved_read8 m_in_rl_func; |
| 115 | | devcb_resolved_read_line m_in_shift_func; |
| 116 | | devcb_resolved_read_line m_in_ctrl_func; |
| 117 | | |
| 118 | | emu_timer *m_timer; |
| 119 | | |
| 120 | | UINT8 m_d_ram[16]; // display ram |
| 121 | | UINT8 m_d_ram_ptr; |
| 122 | | UINT8 m_s_ram[8]; // might be same as fifo ram |
| 123 | | UINT8 m_s_ram_ptr; |
| 124 | | UINT8 m_fifo[8]; // queued keystrokes |
| 125 | | UINT8 m_cmd[8]; // Device settings |
| 126 | | UINT8 m_status; // Returned via status_r |
| 127 | | UINT32 m_clock; // Internal scan clock |
| 128 | | UINT8 m_scanner; // next output on SL lines |
| 129 | | |
| 130 | | bool m_autoinc; // auto-increment flag |
| 131 | | bool m_read_flag; // read from where |
| 132 | | bool m_ctrl_key; // previous state of strobe input |
| 133 | | UINT16 m_key_down; |
| 134 | | }; |
| 135 | | |
| 136 | | |
| 137 | | // device type definition |
| 138 | | extern const device_type I8279; |
| 139 | | |
| 140 | | |
| 141 | | |
| 142 | | #endif |