Previous 15994 Revisions Next

r12977 Wednesday 3rd October, 2001 at 13:58:52 UTC by Miodrag Milanović
pdp11 - made bootstrap device roms selectable since on real board you can put any combination,
now device roms are also loaded on proper place (no whatsnew)
[src/mess/drivers]pdp11.c

src/mess/drivers/pdp11.c
r12976r12977
22
33        PDP-11
44
5      Unibus models
6      ==================
7      PDP-11/20 and PDP-11/15 — The original, non-microprogrammed processor;
8            designed by Jim O'Loughlin. Floating point was supported by
9            peripheral options using various data formats.
10      PDP-11/35 and PDP-11/40 — A microprogrammed successor to the PDP-11/20;
11            the design team was led by Jim O'Loughlin.
12      PDP-11/45, PDP-11/50, and PDP-11/55 — A much faster microprogrammed processor
13            that could use up to 256 kB of semiconductor memory instead of or in
14            addition to core memory. First model to support an optional FP11
15            floating-point coprocessor, which established the format used in
16            later models.
17      PDP-11/70 — The 11/45 architecture expanded to allow 4 MB of physical memory
18            segregated onto a private memory bus, 2 kB of cache memory, and much
19            faster I/O devices connected via the Massbus.[9]
20      PDP-11/05 and PDP-11/10 — A cost-reduced successor to the PDP-11/20.
21      PDP-11/34 and PDP-11/04 — Cost-reduced follow-on products to the 11/35
22            and 11/05; the PDP-11/34 concept was created by Bob Armstrong.
23            The 11/34 supported up to 256 kB of Unibus memory. The PDP-11/34a
24            supported a fast floating-point option, and the 11/34c supported a
25            cache memory option.
26      PDP-11/60 — A PDP-11 with user-writable microcontrol store; this was
27            designed by another team led by Jim O'Loughlin.
28      PDP-11/44 — Replacement for the 11/45 and 11/70 that supported optional cache
29            memory and floating-point processor, and included a sophisticated serial
30            console interface and support for 4 MB of physical memory. The design
31            team was managed by John Sofio. This was the last PDP-11 processor to
32            be constructed using discrete logic gates; later models were all
33            microprogrammed.
34      PDP-11/24 — First VLSI PDP-11 for Unibus, using the "Fonz-11" (F11) chip set
35            with a Unibus adapter.
36      PDP-11/84 — Using the VLSI "Jaws-11" (J11) chip set with a Unibus adapter.
37      PDP-11/94 — J11-based, faster than 11/84.
38
39      Q-bus models
40      ==============
41      PDP-11/03 (also known as the LSI-11/03) — The first LSI PDP-11, this system
42            used a chipset from Western Digital and supported 60 kB of memory.
43      PDP-11/23 — Second generation of LSI (F-11). Early units supported
44            only 248 kB of memory.
45      PDP-11/23+/MicroPDP-11/23 — Improved 11/23 with more functions on the
46            (larger) processor card.
47      MicroPDP-11/73 — The third generation LSI-11, this system used the
48            faster "Jaws-11" (J-11) chip set and supported up to 4 MB of memory.
49      MicroPDP-11/53 — Slower 11/73 with on-board memory.
50      MicroPDP-11/83 — Faster 11/73 with PMI (private memory interconnect).
51      MicroPDP-11/93 — Faster 11/83; final DEC Q-Bus PDP-11 model.
52      KXJ11 - QBUS card (M7616) with PDP-11 based peripheral processor and
53            DMA controller. Based on a J11 CPU equipped with 512 kB of RAM,
54            64 kB of ROM, and parallel and serial interfaces.
55      Mentec M100 — Mentec redesign of the 11/93, with J-11 chipset at 19.66 MHz,
56            four on-board serial ports, 1-4 MB of on-board memory, and optional FPU.
57      Mentec M11 — Processor upgrade board; microcode implementation of PDP-11
58            instruction set by Mentec, using the TI 8832 ALU and TI 8818
59            microsequencer from Texas Instruments.
60      Mentec M1 — Processor upgrade board; microcode implementation of
61            PDP-11 instruction set by Mentec, using Atmel 0.35 µm ASIC.[10]
62      Quickware QED-993 — High performance PDP-11/93 processor upgrade board.
63      DECserver 500 and 550 LAT terminal servers DSRVS-BA using the KDJ11-SB chipset
64
565        23/02/2009 Skeleton driver.
666
767****************************************************************************/
r12976r12977
69129   AM_RANGE( 0xf000, 0xffff ) AM_RAM
70130ADDRESS_MAP_END
71131
132#define M9312_PORT_CONFSETTING \
133PORT_CONFSETTING ( 0x00, "'DL' BOOT prom for RL11 controller") \
134PORT_CONFSETTING ( 0x01, "'DM' BOOT prom for RK06/07 controller") \
135PORT_CONFSETTING ( 0x02, "'DX' BOOT prom for RX01 compatible controller") \
136PORT_CONFSETTING ( 0x03, "'DP/DB' BOOT prom for RP02/03,RP04/5/6 RM02/3 controller") \
137PORT_CONFSETTING ( 0x04, "'DK/DT' BOOT prom for RRK03/05,TU55/56 controllers") \
138PORT_CONFSETTING ( 0x05, "'MM' BOOT prom for TU16/E16 TM02/3 controllers") \
139PORT_CONFSETTING ( 0x06, "'MT' BOOT prom for TU10/TS03 controller") \
140PORT_CONFSETTING ( 0x07, "'DS' BOOT prom for RS03/RS04 controller") \
141PORT_CONFSETTING ( 0x08, "'PR/TT' BOOT prom for PC05,LO SPD RDR controllers") \
142PORT_CONFSETTING ( 0x09, "'CT' BOOT prom for TA11/TU60 controller") \
143PORT_CONFSETTING ( 0x0a, "'RS' BOOT prom for RS11, RS64 controller") \
144PORT_CONFSETTING ( 0x0b, "'CR' BOOT prom for CR11 card reader") \
145PORT_CONFSETTING ( 0x0c, "'MS' BOOT prom for TS11/TS04/TU80 compatible controller") \
146PORT_CONFSETTING ( 0x0d, "'DD' BOOT prom for TU58 DECtapeII serial tape controller") \
147PORT_CONFSETTING ( 0x0e, "'DU' BOOT prom for MSCP compatible controller") \
148PORT_CONFSETTING ( 0x0f, "'XX' Unknown 1/3") \
149PORT_CONFSETTING ( 0x10, "'XX' Unknown 2/3") \
150PORT_CONFSETTING ( 0x11, "'XX' Unknown 3/3") \
151PORT_CONFSETTING ( 0x12, "'DY' BOOT prom for RX02 compatible controller") \
152PORT_CONFSETTING ( 0x13, "'XM' DECNET 1/3 (DECnet DDCMP DMC11/DMR11)") \
153PORT_CONFSETTING ( 0x14, "'XM' DECNET 2/3 (DECnet DDCMP DMC11/DMR11)") \
154PORT_CONFSETTING ( 0x15, "'XM' DECNET 3/3 (DECnet DDCMP DMC11/DMR11)") \
155PORT_CONFSETTING ( 0x16, "'XU' DECNET 1/3 (DECnet DDCMP DU11)") \
156PORT_CONFSETTING ( 0x17, "'XU' DECNET 2/3 (DECnet DDCMP DU11)") \
157PORT_CONFSETTING ( 0x18, "'XU' DECNET 3/3 (DECnet DDCMP DU11)") \
158PORT_CONFSETTING ( 0x19, "'XW' DECNET 1/3 (DECnet DDCMP DUP11)") \
159PORT_CONFSETTING ( 0x1a, "'XW' DECNET 2/3 (DECnet DDCMP DUP11)") \
160PORT_CONFSETTING ( 0x1b, "'XW' DECNET 3/3 (DECnet DDCMP DUP11)") \
161PORT_CONFSETTING ( 0x1c, "'XL' DECNET 1/3 (DECnet DDCMP DL11-E)") \
162PORT_CONFSETTING ( 0x1d, "'XL' DECNET 2/3 (DECnet DDCMP DL11-E)") \
163PORT_CONFSETTING ( 0x1e, "'XL' DECNET 3/3 (DECnet DDCMP DL11-E)") \
164PORT_CONFSETTING ( 0x1f, "'XE' DEUNA DECnet Ethernet") \
165PORT_CONFSETTING ( 0x20, "'MU' TMSCP tapes, including TK50, TU81") \
166
72167/* Input ports */
73168static INPUT_PORTS_START( pdp11 )
169   PORT_START( "CONSPROM" )
170   PORT_CONFNAME ( 0x01, 0, "Console PROM" )
171   PORT_CONFSETTING ( 0x00, "11/04/05/34/35/40/45/50/55" )
172   PORT_CONFSETTING ( 0x01, "11/60-70" )
173   PORT_START( "DEVPROM1" )
174   PORT_CONFNAME ( 0x2f, 0x02, "Device 1 PROM" )
175   M9312_PORT_CONFSETTING   
176   PORT_START( "DEVPROM2" )
177   PORT_CONFNAME ( 0x2f, 0x00, "Device 2 PROM" )
178   M9312_PORT_CONFSETTING   
179   PORT_START( "DEVPROM3" )
180   PORT_CONFNAME ( 0x2f, 0x0d, "Device 3 PROM" )
181   M9312_PORT_CONFSETTING   
182   PORT_START( "DEVPROM4" )
183   PORT_CONFNAME ( 0x2f, 0x08, "Device 4 PROM" )
184   M9312_PORT_CONFSETTING   
74185INPUT_PORTS_END
75186
76187
r12976r12977
101212   }
102213}
103214
104static MACHINE_RESET(pdp11ub2)
215static void load9312prom(UINT8 *desc, UINT8 *src, int size)
105216{
106   // Load M9312
107   UINT8* user1 = machine.region("user1")->base();
108   UINT8* maincpu = machine.region("maincpu")->base();
109   int i;
110
111217   //   3   2   1   8
112218   //   7   6   5   4
113219   // ~11 ~10   9   0
114220   //  15  14  13 ~12
115   for(i=0;i<0x100;i++) {
116      UINT8 nib1 = user1[i*4+0];
117      UINT8 nib2 = user1[i*4+1];
118      UINT8 nib3 = user1[i*4+2];
119      UINT8 nib4 = user1[i*4+3];
221   for(int i=0;i<size;i++) {
222      UINT8 nib1 = src[i*4+0];
223      UINT8 nib2 = src[i*4+1];
224      UINT8 nib3 = src[i*4+2];
225      UINT8 nib4 = src[i*4+3];
120226
121      maincpu[0xea00 + i*2 + 0] = (nib2 << 4) + ((nib1 & 0x0e) | (nib3 & 1));
122      maincpu[0xea00 + i*2 + 1] = ((nib4 ^ 0x01)<<4) + ((nib1 & 0x01) | ((nib3 ^ 0x0c) & 0x0e));
227      desc[i*2 + 0] = (nib2 << 4) + ((nib1 & 0x0e) | (nib3 & 1));
228      desc[i*2 + 1] = ((nib4 ^ 0x01)<<4) + ((nib1 & 0x01) | ((nib3 ^ 0x0c) & 0x0e));
123229   }
230}
124231
125   cpu_set_reg(machine.device("maincpu"), T11_PC, 0xea10);    // diag*/
126   //cpu_set_reg(machine.device("maincpu"), T11_PC, 0xea64);    // no-diag
232static MACHINE_RESET(pdp11ub2)
233{
234   // Load M9312
235   UINT8* user1 = machine.region("consproms")->base() + input_port_read(machine,"CONSPROM") * 0x0400;
236   UINT8* maincpu = machine.region("maincpu")->base();
237
238   //0165000 EA00
239   load9312prom(maincpu + 0165000,user1,0x100);
240   cpu_set_reg(machine.device("maincpu"), T11_PC, 0165020);    // diag*/
241   //cpu_set_reg(machine.device("maincpu"), T11_PC, 0165144);    // no-diag
242   
243   //0173000 F600   
244   load9312prom(maincpu + 0173000,machine.region("devproms")->base() + input_port_read(machine,"DEVPROM1") * 0x0200,0x080);
245   //0173200 F680
246   load9312prom(maincpu + 0173200,machine.region("devproms")->base() + input_port_read(machine,"DEVPROM2") * 0x0200,0x080);
247   //0173400 F700
248   load9312prom(maincpu + 0173400,machine.region("devproms")->base() + input_port_read(machine,"DEVPROM3") * 0x0200,0x080);
249   //0173600 F780
250   load9312prom(maincpu + 0173600,machine.region("devproms")->base() + input_port_read(machine,"DEVPROM4") * 0x0200,0x080);
251   
127252}
128253
129254static MACHINE_RESET(pdp11qb)
r12976r12977
189314
190315ROM_START( pdp11ub2 )
191316   ROM_REGION( 0x10000, "maincpu", ROMREGION_ERASEFF )
192   ROM_REGION( 0x1000, "user1", ROMREGION_ERASEFF )
193   ROM_LOAD( "23-248f1.bin", 0x0000, 0x0400, CRC(ecda1a6d) SHA1(b2bf770dda349fdd469235871564280baf06301d))
194   //ROM_LOAD( "23-616f1-1666.bin", 0x0000, 0x0400, CRC(a3dfb5aa) SHA1(7f06c624ae3fbb49535258b8722b5a3c548da3ba))
317   ROM_REGION( 0x800, "consproms", ROMREGION_ERASEFF )
318   ROM_LOAD( "23-248f1.bin", 0x0000, 0x0400, CRC(ecda1a6d) SHA1(b2bf770dda349fdd469235871564280baf06301d)) // M9312 11/04/05/34/35/40/45/50/55  Console/Diagnostic PROM
319    ROM_LOAD( "23-616f1.bin", 0x0400, 0x0400, CRC(a3dfb5aa) SHA1(7f06c624ae3fbb49535258b8722b5a3c548da3ba)) // M9312 11/60-70 Diagnostic/Console ROM
320   ROM_REGION( 0x4200, "devproms", ROMREGION_ERASEFF )
321   ROM_LOAD( "23-751a9.bin", 0x0000, 0x0200, CRC(15bebc6a) SHA1(a621c5b1cebebbb110ee646a8c36ee4c606e269b)) // M9312 'DL' BOOT prom for RL11 controller
322   ROM_LOAD( "23-752a9.bin", 0x0200, 0x0200, CRC(6cf1f859) SHA1(7c876eda2f0d74d6f5d876256c28dbd56c405ca7)) // M9312 'DM' BOOT prom for RK06/07 controller
323   ROM_LOAD( "23-753a9.bin", 0x0400, 0x0200, CRC(f4c4b40c) SHA1(a0bdb922c722d439f35ba8149a8f657ffcc8fb54)) // M9312 'DX' BOOT prom for RX01 compatible controller
324   ROM_LOAD( "23-755a9.bin", 0x0600, 0x0200, CRC(ed06b35c) SHA1(d972c6a743d73ce9244d2bcfdd40eea2bb22e717)) // M9312 'DP/DB' BOOT prom for RP02/03,RP04/5/6 RM02/3 controller
325   ROM_LOAD( "23-756a9.bin", 0x0800, 0x0200, CRC(12271ab2) SHA1(f0ff42a8fd839dd75d6c1a25cc82d0933fd09dbc)) // M9312 'DK/DT' BOOT prom for RRK03/05,TU55/56 controllers
326   ROM_LOAD( "23-757a9.bin", 0x0a00, 0x0200, CRC(af251aab) SHA1(4d760ec3f6ff5f4e2cafcb44b275183872b69cb6)) // M9312 'MM' BOOT prom for TU16/E16 TM02/3 controllers
327   ROM_LOAD( "23-758a9.bin", 0x0c00, 0x0200, CRC(b71e8878) SHA1(f45c47c702c94a70c36732c12173ce60d0be1a11)) // M9312 'MT' BOOT prom for TU10/TS03 controller
328   ROM_LOAD( "23-759a9.bin", 0x0e00, 0x0200, CRC(29a93448) SHA1(0b549170c6a3f49c1587adb6cc691786111c0dd3)) // M9312 'DS' BOOT prom for RS03/RS04 controller
329   ROM_LOAD( "23-760a9.bin", 0x1000, 0x0200, CRC(ea093648) SHA1(3875a0147c43db1a5a381bbe85937a5628e6220c)) // M9312 'PR/TT' BOOT prom for PC05,LO SPD RDR controllers
330   ROM_LOAD( "23-761a9.bin", 0x1200, 0x0200, CRC(4310ebe8) SHA1(a3144f96819ea57acfac5de5e19961294e7d4ad9)) // M9312 'CT' BOOT prom for TA11/TU60 controller
331   ROM_LOAD( "23-762a9.bin", 0x1400, 0x0200, NO_DUMP)                                           // M9312 'RS' BOOT prom for RS11, RS64 controller
332   ROM_LOAD( "23-763a9.bin", 0x1600, 0x0200, NO_DUMP)                                           // M9312 'CR' BOOT prom for CR11 card reader
333   ROM_LOAD( "23-764a9.bin", 0x1800, 0x0200, CRC(7c8b7ed4) SHA1(ba0c9f03027eb3dafcc0936e877637d3c9947f94)) // M9312 'MS' BOOT prom for TS11/TS04/TU80 compatible controller
334   ROM_LOAD( "23-765a9.bin", 0x1a00, 0x0200, CRC(702dfeb2) SHA1(0d37bdd3846de4b104b8968a0e83ed81abd7f9ae)) // M9312 'DD' BOOT prom for TU58 DECtapeII serial tape controller
335   ROM_LOAD( "23-767a9.bin", 0x1c00, 0x0200, CRC(4b94e3fa) SHA1(3cf92c2f64f95e8cc3abb8af2526cc65ce53ca8a)) // M9312 'DU' BOOT prom for MSCP compatible controller
336   ROM_LOAD( "23-786a9.bin", 0x1e00, 0x0200, CRC(a5326664) SHA1(238f97fc5b2b540948ea1e27a4cd1dcf18255b21)) // M9312 'XX' Unknown 1/3
337   ROM_LOAD( "23-787a9.bin", 0x2000, 0x0200, CRC(025debf9) SHA1(8ea2faf2e2d78be0ad2f77e61bae0dfb9c3b4b01)) // M9312 'XX' Unknown 2/3
338   ROM_LOAD( "23-788a9.bin", 0x2200, 0x0200, CRC(3c7ed364) SHA1(519ffac2e4878490128e754a0473502c767a94e2)) // M9312 'XX' Unknown 3/3
339   ROM_LOAD( "23-811a9.bin", 0x2400, 0x0200, CRC(9aa8499a) SHA1(11b040e0908d7492dcc450cbb72d76633dd687ca)) // M9312 'DY' BOOT prom for RX02 compatible controller
340   ROM_LOAD( "23-862a9.bin", 0x2600, 0x0200, CRC(38dbd994) SHA1(c5db671e6b70f3b4d345a02b46e0ea7566160d04)) // M9312 'XM' DECNET 1/3 (DECnet DDCMP DMC11/DMR11)
341   ROM_LOAD( "23-863a9.bin", 0x2800, 0x0200, CRC(bbef2f41) SHA1(f472b7a8bd4c0a49dc3ec38f886755910f73fe66)) // M9312 'XM' DECNET 2/3 (DECnet DDCMP DMC11/DMR11)
342   ROM_LOAD( "23-864a9.bin", 0x2a00, 0x0200, CRC(85cc17dc) SHA1(371dbd3c672fe4b1819762c3082c4217a7597547)) // M9312 'XM' DECNET 3/3 (DECnet DDCMP DMC11/DMR11)
343   ROM_LOAD( "23-865a9.bin", 0x2c00, 0x0200, NO_DUMP)                                           // M9312 'XU' DECNET 1/3 (DECnet DDCMP DU11)
344   ROM_LOAD( "23-866a9.bin", 0x2e00, 0x0200, NO_DUMP)                                           // M9312 'XU' DECNET 2/3 (DECnet DDCMP DU11)
345   ROM_LOAD( "23-867a9.bin", 0x3000, 0x0200, NO_DUMP)                                           // M9312 'XU' DECNET 3/3 (DECnet DDCMP DU11)
346   ROM_LOAD( "23-868a9.bin", 0x3200, 0x0200, NO_DUMP)                                           // M9312 'XW' DECNET 1/3 (DECnet DDCMP DUP11)
347   ROM_LOAD( "23-869a9.bin", 0x3400, 0x0200, NO_DUMP)                                           // M9312 'XW' DECNET 2/3 (DECnet DDCMP DUP11)
348   ROM_LOAD( "23-870a9.bin", 0x3600, 0x0200, NO_DUMP)                                           // M9312 'XW' DECNET 3/3 (DECnet DDCMP DUP11)
349   ROM_LOAD( "23-926a9.bin", 0x3800, 0x0200, NO_DUMP)                                           // M9312 'XL' DECNET 1/3 (DECnet DDCMP DL11-E)
350   ROM_LOAD( "23-927a9.bin", 0x3a00, 0x0200, NO_DUMP)                                           // M9312 'XL' DECNET 2/3 (DECnet DDCMP DL11-E)
351   ROM_LOAD( "23-928a9.bin", 0x3c00, 0x0200, NO_DUMP)                                           // M9312 'XL' DECNET 3/3 (DECnet DDCMP DL11-E)
352   ROM_LOAD( "23-e22a9.bin", 0x3e00, 0x0200, NO_DUMP)                                           // M9312 'XE' DEUNA DECnet Ethernet
353   ROM_LOAD( "23-e39a9.bin", 0x4000, 0x0200, CRC(4b94e3fa) SHA1(3cf92c2f64f95e8cc3abb8af2526cc65ce53ca8a)) // M9312 'MU' TMSCP tapes, including TK50, TU81
354
195355ROM_END
196356
197357ROM_START( pdp11qb )

Previous 15994 Revisions Next


© 1998-2018 The MESS Team